Sentry360 FS-IP6360-V User Manual

FS-IP6360-V
User Manual
Ver 1.0
©Sentry360 2016
Table of Contents
1. Overview ....................................................................................................................................3
2. Connect Ethernet Cable ..............................................................................................................9
3. System Requirements ............................................................................................................... 10
4. Access Camera .......................................................................................................................... 11
5. Configure Video Streams ........................................................................................................... 15
6. Configuration Files Export / Import ........................................................................................... 16
Appendix A: Delete the Existing DC Viewer ....................................................................................... 17
Appendix B: Setup Internet Security ................................................................................................. 18
1. Overview
The FS-IP6360-V is an MJPEG or H.264 encoding, 6.0 Megapixel resolution, IP addressable 360 degree camera. It is designed to deliver full-motion, high-definition, progressive scan digital video across local area networks. The FS-IP6360-V features a design with no moving parts, creating a full 360 degree view. An optically corrected panoramic lens, designed exclusively for the FullSight™ camera, allows for immersive 360 degree live view as well as pan-tilt-zoom during playback with the use of Sentry360’s API or SDK with any 3rd party network video recording software certified partner. The FS-IP6360-V also features on-camera edge dewarping with single, dual, and quad modes for viewing.
1.1 Features
6.0 Megapixel CMOS Sensor Maximum Resolution: 3072 x 2048 Maximum Framerate: 30 fps IR Cut Filter Full Onvif Compatibility Fisheye: 1.55 mm f-theta Motion Detection PoE 802.3af 100/10 LAN Connection Protocols: UDP, TCP, HTTP, TFTP, RTSP Automatic Exposure Automatic White Balance Brightness, Contrast, Saturation Controls IP66 IK10
1.2 Package Contents
Please check the package contains the following items listed below.
NOTE: The type of the supplied self-tapping screws is mainly for softer substrate/material installation such as wood. For other installation environment such as cement wall, it is required to pre-drill and use plastic anchors before fastening the supplied self-tapping screw on the wall.
1.3 Dimensions
The FS-IP6360-V dimensions are shown below.
1.4 Installation
Step 1. Put the rubber washer in both sides of the holes
on the bottom plate of the camera.
Step 2. Align the installing hole to the target position and
fasten the screws to attach the camera.
Step 3. Refer to 1.5 FUNCTION CABLES to connect the cable.
Step 4. Align the arched parts on both the dome cover
and bottom plate to attach the two parts firmly together. Fasten the security screws on the dome cover to finish installing the camera.
We suggest installing the FS-IP6360-V according to the following steps to make sure the camera is waterproof.
Loading...
+ 12 hidden pages