SENTRY BT150 User Manual

User Manual

Bluetooth Headset

BT150

FCC ID:2ACP4BT150

Product Parameters

型号
Model

版本
Version

待机时间
Stand-by T ime
电源输入
Power Input

降噪
Noise Reduction
切歌
Skip

功能
Function

产品应用
Product Application

配对与连接
Pairing and Connection

1 使手机与耳机的距离保持在一米以内，越近越好。

1. Keep the distance between the mobile phone and the headset within 1 m; the closer, the better.
2 按住“ ” 键约 5 秒看到红蓝灯交替闪烁时松开，此时耳机已进入配对模式。

2. Press and hold the key for about 5 seconds, and then release it when the red and the blue
lamps alternately blink. At this time, the headset has entered the paring mode.
3 开启手机蓝牙功能，搜索蓝牙设备，选择‘BT150’ 序号名即可配对连接，当连接成功后，
耳机蓝色指示灯慢闪

3. Enable the Bluetooth function of the mobile phone, search the Bluetooth equipment, select
‘BT150’ sequence name for paring and connection. After connection is successful, the blue
indicating lamp of the headset slowly blinks.

注意：
Notes:

若手机提示输入配对密码，请输入‘0000’并确认

If the mobile phone prompts to enter the pairing password, please enter ‘0000’ and confirm.

配对模素会维持 5 分钟，超过 2 分钟仍未成功配对连接时，耳机会自动切换到待机模式

The pairing mode will be maintained for 5 minutes. If pairing and connection are unsuccessful
beyond 2 minutes, the headset will automatically switch to the stand-by mode.

完成配对后，耳机和手机会相互记住对方，下次使用时无需再次配对。耳机再次开机
After pairing iscompleted, the headset and the handset will remember eachother, without pairing

BT150

V4.1

180 小时
180 hours
DC5V/200mA

CVC6.0

支持
Support

来电报号，线控接听/挂断/拒接/开关机，电话重拨，音量调节，中
英文切换，智能一拖二，听音乐暂停/播放，上下切换歌曲

Caller report, line control answer/hang up/rejection/on-off, redial,
volume adjustment, Chinese-English shifting, intelligent one-driving­two, music pause/play, up and down song switching

支持任何带蓝牙设备类型的手机，ipad 平板电脑，台式电脑。不自
带蓝牙功能的台式电脑可配合蓝牙适配器使用。

Support any mobile phones with Bluetooth device, iPad and desktop
computer. The desktop computer without Bluetooth function can be used
by matching with the Bluetooth adapter.

使用距离
Use
Distance
电池容量
Battery
Capacity
通话时间
Talk Time
充电时间
Charging
Time
协议
Protocol
语音提示
Voice
Prompt

10 米
10 m

55mAH

4.5 小时

4.5 hours
2 小时
2 hours

HFP HSP A2DP AVRCP APTX

支持
Support

线控器按键功能
Key functions of line controller

（随手机品牌，型号，系统版本不同而有所差异，请消费者自行验证，恕不

一一列举）

(Vary with the brand, mode and system version of the mobile phone. The

consumers shall make verification by themselves.)

在

开/关机:长按“ ”键 5 秒开/关机

On/off: Press and hold the key for 5 seconds to turn on/off.
暂停音乐或视频：短按“ ”键暂停播放，再按一下恢复播放
Music or video pause: Press the key to pause playing, and press the key again to resume

playback.

增加音量：长按“+”键，减小音量：长按“-”键
Volume increase: Press and hold the key +; volume reduction: Press and hold the key -.
下一曲：短按“+”键，上一曲：短按“-”键
Next song: press the key +; previous song: press the key -.
接听/挂断电话：来电时短按一下“ ”接听来电，再按一下挂断通话
Answer/hang-up: press the key to answer when the call is incoming, and press it again to

hang up.

拒听来电：长按“ ”约 2 秒后放开
Rejection: Press and hold the key for about 2 seconds and then release it.
中英文语音切换：同时短按“ ”和“+”键
Chinese-English voice shifting: Press and + at the sam e time.

智能一拖二设置方法
Setting method of intelligent one-driving-two

步骤一：先把第一部手机配对连接
Step I: pair and connect the first mobile phone

1.蓝牙耳机关机状态下，长按多功能键约 5 秒钟，直到耳机指示灯出现红蓝灯交替快闪

时进入可配对状态

1. In the off state of the Bluetooth headset, press and hold the multifunction key for about 5
seconds and enter into the pai ring state wh en the red and blue headset indicating lamps alternately
and quickly flash.

2.打开手机 A 的蓝牙功能，搜索蓝牙找到‘BT150’序号名进行配对后完成连接

2. Enable the Bluetooth function of the mobile phone A, search Bluetooth to find ‘BT150’
sequence name to pair and then connect.

步骤二：再配对连接第二部手机
Step II: pair and connect the second mobile phone

1.将蓝牙耳机关机，手机 A 蓝牙关闭

1. Turn off the Bluetooth headset to disable the Bluetooth of the mobile phone A.

2.蓝牙耳机关机状态下，长按多功能键约 5 秒钟，直到耳机指示灯出现红蓝灯交替快闪
时进入可配对状态

2. In the off state of the Bluetooth headset, press and hold the multifunction key for about 5
seconds and enter into the pai ring state wh en the red and blue headset indicating lamps alternately
and quickly flash.

3.打开手机 B 的蓝牙功能，搜索蓝牙找到‘BT150’序号名进行配对后完成连接\

3. Enable the Bluetooth function of the mobile phone B, search Bluetooth to find
‘BT150’sequence name to pair and then connect.

步骤三：第一部手机再次连接耳机