Sentinel Eliminator Nano Installation Manual

Page 1
Eliminator Nano
Installation Manual
Central Heating Filter
Version 1 – July 2014
IMPORTANT
for reference during servicing
Page 2 Eliminator Nano
Installation Manual V1 07/14
Page 3 Eliminator Nano
Installation Manual V1 07/14
Index
Section Page
Safety Considerations 4 General Description 5 Schematic Diagram 6 System Design 7 Mounting Considerations 8 Installation Procedure 9–11 Servicing 12 Dosing 13 Technical Specification 14 Guarantee 15
Please visit www.sentinelprotects.com/uk/guarantee-registration
for Guarantee Registration and Terms and Conditions.
Page 4 Eliminator Nano
Installation Manual V1 07/14
Safety Considerations
SAFETY CONSIDERATIONS
• Sentinel Eliminator Nano® filter is a pressure vessel containing a hot fluid. In the interests of reliable long term operation, it is strongly recommended
that the Sentinel Eliminator Nano filter is only installed by a qualified plumber or heating engineer.
• Always ensure that the system is fully drained and the pipework completely cooled before attempting installation. Check very carefully for any leaks after fitting the filter and pressurising the system.
• The T piece collar must be hand tightened only – do not attempt to use a
tool as this could damage the seal.
• The filter bin is sealed permanently onto the main body of the unit – do not attempt to remove the bin as this could lead to seal damage and invalidate the warranty.
• Care should be taken when flushing a hot system.
Page 5 Eliminator Nano
Installation Manual V1 07/14
General Description
GENERAL DESCRIPTION
The Sentinel Eliminator Nano central heating filter is designed for the effective removal of all types of debris associated with wet central heating systems. Sophisticated hydrocyclone technology is employed to remove both magnetic (such as magnetite) and non-magnetic particles with equal effectiveness.
In the interests of long term reliability, the body of the filter is manufactured from a high performance glass-reinforced engineering polymer, which has been proven to withstand up to 13 bar static pressure.
The main filter body is permanently sealed. Removal of collected deposits can be achieved by flushing at regular service intervals. Never attempt to
remove the bin as this could lead to a compromised seal and invalidate any subsequent warranty claim.
Loading...
+ 11 hidden pages