Using Sentina as a Power
Failure/Motion Detector Light
Using Sentina as a Photoelectric Night Light
LED92M
User's Manual
Sentina is on when the power is out !
Your Sentina is 4-way light;
1. Power Failure Light
2. Motion Detector Light
3. Photoelectric Night Light
4. Emergency Flashlight
Getting Started
1. Flip up
the AC plug
Never Leaves You In The Dark!
Sentina turns itself on when power failure
occurs. No need to look for matches to
light the candles.
No Need To Look For Light Switch!
When the unit is plugged in, it will detect
motion within about 12 feet and activate
the top flash light for safety. It triggers to
switch the light on by phasing in the spot
light and stays lit for 1 minute.
1. Set "FLASHLIGHT" Switch
to "AUTO"
Note: If the batteries are
charged, the flashlight turns on, as soon the
switch is set to "AUTO"
Energy Saver - Automatic Night Light
When the switch is set on "AUTO", the
unit functions as dusk to dawn night light.
Set to "OFF", the unit’s night light
function is disabled.
1. Set "NIGHT LIGHT" Switch
to "AUTO"
2. Plug Sentina into AC Outlet
Sentina turns on night
light at dusk and turns
it off at dawn.
Photo
Sensor
Night Light
2. Plug the unit into
a power socket
and let it charge
for 12 hours.
That's It!
Your Sentina is now
ready to perform.
Using Sentina as an
Emergency Flashlight
No Batteries/Bulb Replacement
Needed, It's A Rechargeable LED
Flashlight!
Sentina is also an emergency
flashlight that just won’t quit.
1. Just unplug it from the socket
(Make sure that Flashlight Switch is at "Auto")
2. Take it Anywhere, It will last over
8 hours!
For continuous use, set the
"FLASHLIGHT" switch to "ON"
3. Plug Sentina back into AC Outlet
After use to charge
Turn the "FLASHLIGHT" switch to
"AUTO" and keep Sentine plugged
so Sentina is always ready!
2. Plug Sentina into AC Outlet
Flashlight
Sentina starts detecting
motion at dusk.
Motion
Sensor
Sentina is perfect for
dark halls, stairwells,
or to guard against
prowlers.
Recharging Sentina
Always keep Sentina on AC Outlet
Battery Status:
RED = Low
YELLOW = Charging
Charging
Status
Indicator
GREEN = Full
Specifications
Power Source: AC120V 60Hz 6W
Motion Sensor Range - 12 feet, 100 degree radius
Photo Electric Sensor - Activated in 5 Lux or under
Batteries: AAA NiMH 1.2V 600mAh x 3
Charging Time: 12 Hours
Lights:
Flash Light - 3 Super Bright White LEDs
Night Light - 1 White LED
To keep Night Light OFF, set "NIGHT
LIGHT" Switch to "OFF"
If you love your Sentina.....
Buy two or more Sentinas
at www.datexx.com for
your family or friends and
get FREE SHIPPING!
www.datexx.com
By TELEDEX Inc. Kenilworth , NJ 07033 USA
© 2005 Teledex Inc. All rights reserved
U.S. patent pending
Printed in China