Sentern JC-82 User Manual

ess

ating Instruction

Compressor Wine Cooler

JC-82

Operating Instruction

BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTION.

*Wine Not Included.

Customer Service

Tel: [phone] Ext. 100
E-mail: [e-mail]

IMPORTANT SAFETY INSTRUCTIONS



To reduce the risk of fire, electrical shock, or injury



WARNING

Read all instructions before using the APPLIANCE.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or



similarly qualified person in order to avoid a safety hazard.

This appliance is not intended for users (including children) with reduced physical, sensory



or mental capabilities, or lack of experience and knowledge, unless they have been given

supervision or instruction concerning the use of the appliance by a person responsible for

their safety.

 Children should be supervised to ensure that they do not play with the appliance.

WARNING: To avoid safety hazards due to instability performance, the appliance must be fixed



in accordance with the instruction.

-Save these instructions-

while using your wine cooler, please follow these
basic guidelines:

INSTALLATION INSTRUCTIONS

This appliance is designed to be free-standing only, and should not be recessed or built-in.



Make sure the floor where you place your unit is strong enough to support the unit when it is fully



loaded. To level your unit, adjust the leveling legs at the bottom of the unit.

 This appliance is not designed to be installed inside of a cabinet where the front is covered by

any type of door.

Allow 10 cm of space between the top, the back and sides of the wine unit, which allows



proper air circulation to cool the compressor and condenser.

Store the unit away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct



sunlight may affect the acrylic coating and the heat sources may increase energy consumption.

Extreme cold ambient temperatures may also influence the proper performance of the unit.

 Avoid locating the unit in moist areas.

Plug the unit into an exclusive, properly installed grounded wall outlet. Do not under any



circumstances cut or remove the third (ground) prong from the power cord. Any questions

concerning power and/or grounding should be directed toward a certified electrician or an

authorized product service center.



After plugging the Wine Chiller into a wall outlet, allow the unit to cool down for 2-3 hours before

placing any items in the compartment.