Sentera Controls MTV-1-CP Mounting And Operation Instructions

MTV-1-CP

230 VAC POTENTIOMETER
WITH MIN & MAX SETTINGS,
DRY CONTACT

Mounting and operating instructions

www.sentera.eu

MIW-MTV-1-CP-EN-000 - 22 / 08 / 2018 2 - 8

back to the table of contents

Table of contents

SAFETY AND PRECAUTIONS 3

PRODUCT DESCRIPTION 4

ARTICLE CODES 4

INTENDED AREA OF USE 4

TECHNICAL DATA 4

STANDARDS 5

OPERATIONAL DIAGRAM 5

WIRING AND CONNECTIONS 5

MOUNTING INSTRUCTIONS IN STEPS 5

VERIFICATION OF INSTALLATION INSTRUCTIONS 7

TRANSPORT AND STORAGE 8

WARRANTY AND RESTRICTIONS 8

MAINTENANCE 8

MTV-1-CP

230 VAC POTENTIOMETER WITH MIN
& MAX SETTINGS, DRY CONTACT

www.sentera.eu

MIW-MTV-1-CP-EN-000 - 22 / 08 / 2018 3 - 8

back to the table of contents

SAFETY AND PRECAUTIONS

Read all the information, the datasheet, mounting and operating instructions and
study the wiring and connection diagram before working with the product. For
personal and equipment safety, and for optimum product performance, make sure you
entirely understand the contents before installing, using, or maintaining this product.

For saf ety and lic ensing (CE ) reasons , unauthor ised conver sion and/ or modi fications
of the product are inadmissible.

e product should not be exposed to abnormal conditions, such as: ex treme
temperatures, direct sunlight or vibrations. Long-term exposure to chemical
vapours in high concentration can affect the product performance. Make sure the
work environment is as dry as possible; avoid condensation.

All installations shall comply with local health and safety regulations and local
electrical standards and approved codes. is product can only be installed by
an engineer or a technician who has expert knowledge of the product and safety
precautions.

Avoid contacts with energised electrical parts; always treat the product as if it is
live. Always disconnect the power supply before connecting, servicing or repairing
the product.

Always verify that you apply appropriate power supply to the product and use
appropriate wire size and characteristics. Make sure that all the screws and nuts
are well tightened and fuses (if any) are fitted well.

Recycling of equipment and packaging should be taken into consideration and these
should be disposed of in accordance with local and national legislation/regulations.

In case there are any questions that are not answered, please contact your
technical support or consult a professional.

MTV-1-CP

230 VAC POTENTIOMETER WITH MIN
& MAX SETTINGS, DRY CONTACT