Sentera Controls GTT-1 Mounting And Operating Instructions
TEMPERATURE BASED
FAN SPEED CONTROLLER
GTT-1
Mounting and operating instructions
POWER RANGE: 3,5—7,5 A
TEMPERATURE BASED FAN
GTT-1
SPEED CONTROLLER
Table of contents
SAFETY AND PRECAUTIONS 3
PRODUCT DESCRIPTION 4
ARTICLE CODES 4
INTENDED AREA OF USE 4
TECHNICAL DATA 4
STANDARDS 5
OPERATIONAL DIAGRAM 5
WIRING AND CONNECTIONS 5
MOUNTING INSTRUCTIONS IN STEPS 6
OPERATING INSTRUCTIONS 7
VERIFICATION OF INSTALLATION 8
TRANSPORT AND STORAGE 8
WARRANTY AND RESTRICTIONS 8
MAINTENANCE 8
MIW-GTT-1-35-75-L22-EN-000 - 07 / 11 / 2018 2 - 8
www.sentera.eu
TEMPERATURE BASED FAN
GTT-1
SPEED CONTROLLER
SAFETY AND PRECAUTIONS
Read all the information, the datasheet, mounting and operating instructions and
study the wiring and connection diagram before working with the product. For
personal and equipment safety, and for optimum product performance, make sure you
entirely understand the contents before installing, using, or maintaining this product.
For saf ety and li censing (CE ) reasons , unauthor ised conver sion and/ or modific ations
of the product are inadmissible.
e product should not be exposed to abnormal conditions, such as: extreme
temperatures, direct sunlight or vibrations. Long-term exposure to chemical
vapours in high concentration can affect the product performance. Make sure the
work environment is as dry as possible; avoid condensation.
All installations shall comply with local health and safety regulations and local
electrical standards and approved codes. is product can only be installed by
an engineer or a technician who has expert knowledge of the product and safety
precautions.
Avoid contacts with energised electrical parts. Always disconnect the power
supply before connecting, servicing or repairing the product.
Always verify that you apply appropriate power supply to the product and use
appropriate wire size and characteristics. Make sure that all the screws and nuts
are well tightened and fuses (if any) are fitted well.
Recycling of equipment and packaging should be taken into consideration and these
should be disposed of in accordance with local and national legislation/regulations.
In case there are any questions that are not answered, please contact our technical
support or consult a professional.
MIW-GTT-1-35-75-L22-EN-000 - 07 / 11 / 2018 3 - 8
www.sentera.eu
Loading...