Sensus Metering Systems MXU505C User Manual

From: Tom Cokenias [[e-mail]]
Sent: Wednesday, January 16, 2002 2:05 PM
To: [e-mail]
Subject: Fwd: RE: Invensys Metering System FCC ID:KCHMXU505C, Assessment
no:AN0 2T17 32

Mike

I received this from Invensys today, no problem including statement in manual.

best regards

Tom

>From: "Gaston, Dean S" <[e-mail]>
>To: 'Tom Cokenias' <[e-mail]>
>Subject: RE: Invensys Metering System FCC ID:KCHMXU505C, Assessment no:AN0
> 2T17 32
>Date: Wed, 16 Jan 2002 15:55:45 -0600
>
>Tom,
>Please notify the FCC that we will include in our manual the paragraph
>suggested in order to comply with 1.1307 with FCC regulations.
>
> > -----Original Message----­> > From: Tom Cokenias <[e-mail]>
> > Sent: Wednesday, January 16, 2002 9:49 AM
> > To: Taylor, Paul V; Gaston, Dean S
> > Subject: Re: Invensys Metering System FCC ID:KCHMXU505C, Assessment
> > no:AN02T17 32
> >
> >
> > Dear Mike,
> > At the end of the "FCC Compliance" section of the Trouble Shooting manual,
> > the following wording will be added:
> > Notice:
> > To comply with the limits for human exposure to radio frequency (RF)
> > fields per paragraph 1.1307 of FCC regulations,
> > this device must be installed to provide a separation distance of at
> > least 20 cm from all persons.
> > I believe this is all you will need to issue the grant for this product,
> > but if you require further information, please don't hesitate to call.
> > best regards
> > Tom Cokenias [e-mail]
> > T.N. Cokenias Consulting
> > P.O. Box 1086
> > El Granada CA 94018
> > tel [phone]
> > cell 650 302 0887
> > fax [phone]
> > Dear Tom:
> > The Installation manual as well as the trouble shooting instruction
> > do not
> > contain the RF exposure warning statement. Please provide it.
> > Best Regards
> > =========================

> > Mike Kuo
> > Compliance Certification Services
> > 561F Monterey Road
> > Morgan Hill CA 95037
> > Telephone number:408-463-0885 EXT:105
> > Fax number :408-463-0888
> > E-Mail:[e-mail]
> >