Sensus Metering Systems FLEXGE100 User Manual

FlexNet KV2c Transceiver Installation Guide

8 July, 2010

Sensus

Copyright 2009 by Sensus Metering Systems, North America. All rights reserved. This document
contains proprietary information. It may not be copied, transmitted or distributed, in whole or in part,
without the consent of Sensus Metering Systems.

Date

Version

Author

Change Description

REVISION SUMMARY

08 JUL 2010

0.1

T.G.

1

2

Section

1 Flexnet KV2c Transceiver Overview

The Flexnet KV2c Transceiver (“device” in this guide) is a printed circuit board which
provides wireless communication capability to the GE KV2c family of electric utility
meters.

The device will mount into the existing GE meters and act as the “Third Party AMR
Board”.

The device shall monitor meter reading and diagnostic information via a C12-21 serial
interface to the GE main board.

The device will communicate via the FlexNet fixed wireless telemetry network to provide
electric meter readings and diagnostic data from the meter to the utility provider via radio.

The device has receiver capabilities to allow for two-way communication over the
FlexNet network.

Section

2 Mechanical Requirements

The device is designed to mount mechanically into the existing GE KV2c meter into the
“AMR” position with no mechanical modification required.

Revision 0.1 3 OF 9 7-8-2010

TO BE USED ONLY FOR THE PURPOSE FOR WHICH IT IS SUBMITTED. ALL RIGHTS RESERVED TO SENSUS

REPRODUCTION WITHOUT WRITTEN CONSENT IS PROHIBITED.

SENSUS CONFIDENTIAL