Sensus Metering Systems 520R Users Manual

Model 510 Installation Instructions

2

Definitions

1 – Sensus TouchPad

12345

6

2 – TouchPad Cover
3 – TouchPad Cover, Tinnerman Type Fastener, TouchPad Locking Clip
4 – Model 510 Radio (Front View)
5 – Model 510 Radio (Rear View with knockout)
6 – Model 510 Radio and TouchCoupler Spacer with TouchPad Cover

3

Table of Contents

Single Port – TouchCoupler Installation ____________________________________ 4
Dual Port – TouchCoupler Installation _____________________________________ 5
Single and Dual Port – Wired Installation___________________________________ 6
Activate Radio__________________________________________________________ 7
Appendix A:___________________________________________________________ 9
Appendix B: Regulatory Information_____________________________________ 12

4

Single Port – TouchCoupler Installation

1) While Model 510 Radio and TouchCoupler Spacer with TouchPad Cover all
still assembled, align the TouchPad Cover over the Sensus TouchPad that is
secured to the wall and press on whole assembly.

2) For additional support, open Model 510 Radio door and screw two screws
using the holes located above the battery compartment.

3) Once secured, activate unit (see activation section).