
Alpha Space IoT Gateway
User Manual
1 Product Overview
Alpha Space Gateway which is developed by SENSORO and features excellent indoor signal coverage and strong
hardware protection is designed and built for indoor IoT scenarios that require low power-consumption, long range
and low throughput, hence capable of handling the data communication of a large-scale sensor network. As the
core infrastructure of the SENSORO LPWAN, its powerful data processing capability is designed to support and
connect thousands of nodes into the network and provide a data path from the nodes all the way to the cloud. This
IoT gateway supports multiple communication modes to servers (4G, Ethernet, Wi-Fi) for flexibility to adapt to
various scenes; multi-network hot backup is also available to improve reliability and stability in data
communication.
2 Features
Ultra long-range wireless signal coverage
Multi-channel parallel data processing capability to support thousands of sensor nodes
Dynamic network optimization designed for high communication stability and performance
Multi network backup options to ensure stability in data communication
Multi built-in sensors for remote monitoring of gateway status
High grade full metal material, overall thermal design, 0℃~+55℃ wide-range operating temperature
Exception monitoring & self-recovery function
Remote system upgrade, reset, factory recovery and configuration
Tri-layer encryption to ensure data security
3 Technical Specifications
Dimensions
LED
141mm x 249mm x 27mm
RGB LED indicating system status
Power Input
Power Consumption
Power over Ethernet (PoE+) (802.3at)
<24W

network, in the order of Ethernet, Cellular and Wi-Fi. And the gateway will automatically choose
Open package box and take out the 4 antennas and connect them to the corresponding ports on the
the current available network without manual configurations and settings.
The IoT gateway support the SELF DIAGNOSTICS. The status LED will blink yellow when the gateway
powers on and will keep yellow when the gateway works.
4 Test Guide
4.1 Network Access
After gateway is powered on, it will be automatically connected to the internet. Within 2-5 minutes, the
available network will be automatically selected and the gateway will connect to the cloud through the
chosen network. At this time, the status of this gateway will be updated in the cloud.
4.2 Communication with sensors
When the gateway goes into normal state, just place the sensor near the gateway and its data and status
will be updated in the cloud in a short time.
4.3 Communication Range
To achieve the optimal communication performance, the gateway should be
deployed in indoor environment without occlusions and radio interference.
To test the communication range, just place the sensor device at different distances and
view the upload statistics results in the cloud.
5 Installation Guide
5.1 Wall Mounted Installation
Plug in the gateway to power it, using either an Ethernet PoE cable or DC power cable.