Datasheet SEN-R-1050-001, SEN-R-1050-002, SEN-R-1050-003, SEN-R-1050-004, SEN-R-1050-005 Datasheet (sensitron semiconductor)

...
SEN
-R-
1050
-
G
查询SEN-R-1050-001供应商
SENSITRON SEMICONDUCTOR
TECHNICAL DATA SHEET 4199, REV. -
TRANSIENT VOLTAGE SUPPRESSOR 5000 WATT SERIES
GLASS PASSIVATED DIE/CELL
FEATURES DESCRIPTION
5000W peak pulse power dissipation
Glass passivated junction
Low incremental surge resistance
Excellent clamping capability
Repetition rate (duty cycle): 0.05%
Fast response time: typically less than 1.0 ps
Typical IR less than 1µA above 10V
APPLICATIONS
ü Power Supply Surge Protection ü Data Link Surge Protection ü Lightning Transient Suppression ü Electrostatic Protection
ELECTRICAL CHARACTERISTICS
PARAMETER SYMBOL Test Conditions Min TYP Max Unit
Peak Pulse Power Pppm Electrical Parameters See Table Maximum Solder Temperature Tmax 10 Second exposure 250 Operating & Storage
Temperature
Note 1: Non -repetitive current pulse, per Fig. 3 and derated above TA = 25 8C per Fig. 2.
Note 1: All dimension in MIL Note 2: The dimension is for low voltage parts (<40V) only. The dimension B, D and G will be larger for high voltage parts (>40V).
CHIP
A B C D E F G
220 13.5 277 98 305 277 98
Tj, Tstg -55 175
B
A
TA = 25 8C, Tp = 1 ms (Note 1)
TVS T1 CELL
This is a transient voltage suppressor series extending from 5.0 volts to 100 volts. It is available in either uni-directional or bi-directional configurations.
The cell version is available in a Type 1 configuration with double tabs. A Type 2 configuration with silicone edge protection protecting the edge of the die and the die cavity between the double tabs is also available as a custom option.
5000 Watts
D
C
TVS T2 CELL
F
8C 8C
E
221 West Industry Court Deer Park, NY 11729-4681 • Phone (631) 586-7600 • Fax (631) 242-9798 •
World Wide Web Site - http://www.sensitron.com E-Mail Address - sales@sensitron.com •
SEN
-R-
1050
-
SENSITRON SEMICONDUCTOR
TECHNICAL DATA SHEET 4199, REV. -
Note 2: Die only configuration requires user to provide adequate energy absorption.
SEN-R-1050-XXX 5000 Watt TVS Series
Part Number
Vr
(V)
SEN-R-1050-001 5.0 6.40 7.00 50 9.2 544.0 10000 SEN-R-1050-002 6.0 6.67 7.37 50 10.3 486.0 10000 SEN-R-1050-003 6.5 7.22 7.98 50 11.2 447.0 4000 SEN-R-1050-004 7.0 7.78 8.60 50 12.0 417.0 2000 SEN-R-1050-005 7.5 8.33 9.21 5 12.9 388.0 500 SEN-R-1050-006 8.0 8.89 9.83 5 13.6 368.0 300 SEN-R-1050-007 8.5 9.44 10.40 5 14.4 348.0 100 SEN-R-1050-008 9.0 10.00 11.10 5 15.4 325.0 40 SEN-R-1050-009 10.0 11.10 12.30 5 17.0 295.0 30 SEN-R-1050-010 11.0 12.20 13.50 5 18.2 275.0 10 SEN-R-1050-011 12.0 13.30 14.70 5 19.9 252.0 10 SEN-R-1050-012 13.0 14.40 15.90 5 21.5 233.0 10 SEN-R-1050-013 14.0 15.60 17.20 5 23.2 216.0 10 SEN-R-1050-014 15.0 16.70 18.50 5 24.4 205.0 10 SEN-R-1050-015 16.0 17.80 19.70 5 26.0 193.0 10 SEN-R-1050-016 17.0 18.90 20.90 5 27.6 181.0 10 SEN-R-1050-017 18.0 20.00 22.10 5 29.2 172.0 10 SEN-R-1050-018 20.0 22.20 24.50 5 32.4 154.0 10 SEN-R-1050-019 22.0 24.00 26.90 5 35.5 141.0 10 SEN-R-1050-020 24.0 26.70 29.50 5 38.9 129.0 10 SEN-R-1050-021 26.0 28.90 31.90 5 42.1 119.0 10 SEN-R-1050-022 28.0 31.10 34.40 5 45.4 110.0 10 SEN-R-1050-023 30.0 33.30 36.80 5 48.4 103.0 10 SEN-R-1050-024 33.0 36.70 40.60 5 53.3 93.9 10 SEN-R-1050-025 36.0 40.00 44.20 5 58.1 86.1 10 SEN-R-1050-026 40.0 44.40 49.10 5 64.5 77.6 10 SEN-R-1050-027 43.0 47.80 52.80 5 69.4 72.1 10 SEN-R-1050-028 45.0 50.00 55.30 5 72.7 68.8 10 SEN-R-1050-029 48.0 53.30 58.90 5 77.4 64.7 10 SEN-R-1050-030 51.0 56.70 62.70 5 82.4 60.7 10 SEN-R-1050-031 54.0 60.00 66.30 5 87.1 57.5 10 SEN-R-1050-032 58.0 64.40 71.20 5 93.6 53.5 10 SEN-R-1050-033 60.0 66.70 73.70 5 96.8 51.7 10 SEN-R-1050-034 64.0 71.10 78.60 5 103.0 48.6 10 SEN-R-1050-035 70.0 77.80 86.00 5 113.0 44.3 10 SEN-R-1050-036 75.0 83.30 92.10 5 121.0 41.4 10 SEN-R-1050-037 78.0 86.70 95.80 5 126.0 39.7 10 SEN-R-1050-038 85.0 94.40 104.00 5 137.0 36.5 10 SEN-R-1050-039 90.0 100.00 111.00 5 146.0 34.3 10 SEN-R-1050-040 100.0 110.00 123.00 5 162.0 30.9 10 SEN-R-1050-041 110.0 122.00 135.00 5 177.0 28.3 10 SEN-R-1050-042 120.0 133.00 147.00 5 193.0 26.0 10 SEN-R-1050-043 130.0 144.00 159.00 5 209.0 24.0 10 SEN-R-1050-044 150.0 167.00 185.00 5 243.0 20.6 10 SEN-R-1050-045 160.0 178.00 197.00 5 259.0 19.3 10 SEN-R-1050-046 170.0 189.00 209.00 5 275.0 18.2 10 SEN-R-1050-047 180.0 200.00 233.00 5 289.0 17.3 10
Vz min
@ Iz
(V)
Vz max
@ Iz
(V)
Iz
(mA)
Vcc
(V)
Ip
(A)
Ir max
@ Vr
(uA)
221 West Industry Court Deer Park, NY 11729-4681 • Phone (631) 586-7600 • Fax (631) 242-9798 •
World Wide Web Site - http://www.sensitron.com E-Mail Address - sales@sensitron.com •
SEN
-R-
1050
-
SENSITRON
Non-repetitive pulse
waveform shown in
PPPM
-
Peak Pulse Power (kW)
Fig.2
-
Pulse Derating Curve
PPPM
-
Peak Pulse Power (kW)
Fig.3
-
Pulse Waveform
IPPM
-
Peak Pulse Current,%
TJ = 25°C
where the peak current
decays to 50% of I
PPM
10/1000µsec.Waveform
as defined by R.E.A.
Peak Value
td
tr = 10
µsec.
TJ = 25°C
Measured at
Zero Bias
Measured at
off voltage
Vwm
60Hz Resistive or
Fig.6
-
Maximum Non
-
repetitive Forward
Surge current
Number of Cycles at 60 HZ
8.3ms Single Half
(JEDEC Method)
SEMICONDUCTOR
TECHNICAL DATA SHEET 4199, REV. -
100
Fig.3 TA = 25°C
10
1
100
75
50
25
0.1
0.1 1.0 10.0 100.0 1000.0 10000.0
Fig. 1 - Peak Pulse Power Rating Curve
150
Pulse Width(td)
100
50
0
0.0 1.0 2.0 3.0 4.0
8
IPPM
is defined as the point
t - Time(ms)
0
0 25 50 75 100 125 150 175 200
TA - Ambient Temperature (°C)
100000
10000
Stand-
1000
f = 1MHZ Vsig = 50mVp-p
CJ, Junction Capacitance
100
1 10 100 1000
VBR - Breakdown Voltage (V)
Fig. 4 - Typical Junction Capacitance
500
6
4
Dissipation (W)
2
PPM(AV),Steady State Power
0
0 25 50 75 100 125 150 175 200
Fig. 5 - Steady State Power Derating Curve
Inductive Load
450
400
350
300
250
IFSM,Peak Forward Surge Currnet (A)
200
1 10 100
TL - Lead Temperature (°C)
221 West Industry Court Deer Park, NY 11729-4681 • Phone (631) 586-7600 • Fax (631) 242-9798 •
World Wide Web Site - http://www.sensitron.com E-Mail Address - sales@sensitron.com •
Sine-Wave
SENSITRON SEMICONDUCTOR
TECHNICAL DATA
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement. 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798
World Wide Web - http://www.sensitron.com E-Mail Address - sales@sensitron.com
Loading...