Sense SE-500-SEH-T,SE-500-DEH-T,SE-300-LAV-BLK Quick Start Manual
Single Ear Headset Microphone
To countour the Single Ear Headset Microphone
for your face, gently bend the earpiece into a
shape that securely grasps the ear. Then gently
bend the boom so that it follows the face and the
microphone is positioned close the the mouth.
Features
•Low-profile design provides unobstrusive
pickup
•Durable, flexible material allows for custom fit
•Highly sensitive, omni-directional capsule
•Natural skin tone blends in seamlessly
•Collar clip adds stability
•Adjust the gooseneck of
the mic so that it is about
1/2
” away from the mouth.
•Do not severly bend the
boom at sharp angles.
Overview
Sense attachable microphones have an intuitive installation and work great for corporate presentations,
houses of worship, audio/video conferencing, and other applications where low-profile, discreet placement
is preferred.
•Connect the 4 pin miniXLR cable into the “MIC
IN” of the body pack.
Double Ear Headset Microphone
To contour the Dual Ear Headset Microphone for
your face, you will need to adjust the size and bend
it into the proper shape. Loosen the adjustment
screws, pull the headset to the correct size, then
re-tighten the screws to lock the positions in
place. Next, gently bend the headset in various
locations to create the ideal fit.
•Attach the detachable
cable clip to wherever
feels comfortable, such as
your back a shirt or collar,
keeping the cord out of
the way.
Installation Tips & Guidelines
Quick Start Guide
Single/Double Ear Headset & Lavalier Microphones
www.snapav.com | Support: 866.838.5052
SE-500-SEH-T, SE-500-DEH-T SE-300-LAV-BLK
Connector 4-pin mini-XLR (F) 4-pin mini-XLR (F)
Frequency Response 60-15,000Hz 60-15,000Hz
Polar Pattern Omni-directional Omni-directional
Sensitivity (at 1KHz) -64±3 dB* (0.63mV) -60±3 dB* (1mV)
Impedance 1.8kΩ 2.2kΩ
Max. SPL for 1% THD 130dB 130dB
•Attach lavalier microphone to a tie, lapel, or wherever is suitable and about 6-10” away from your face.
•Plug the female, 4-pin mini-XLR cable connector into the “MIC IN” of the body pack.
Specifications
•Low-profile design provides unobtrusive pickup
•Omni-directional pickp pattern for various appli-
cations
•Wide dynamic range and frequency response for
excellent sound reinforcement
•Included clip for securing to clothing.
Installation Tips & Guidelines
Overview
Features
Sense lavalier microphones have an intuitive installation and work great for corporate presentations, houses
of worship, audio/video conferencing, video, film and sound reinforcement, and other applications where
low-profile, discreet placement is preferred.
Important Note: Due to the distance between the talker’s mouth and the microphone, lavaliere microphones are not designed for use in spaces where the talker is being reinforced in the same room - such as
training rooms. Using them in these applications will often result in feedback due to the higher gain necessary for proper pickup. For these applications, the single ear hook and double ear hook microphones
are recommended.
Quick Start Guide
Single/Double Ear Headset & Lavalier Microphones
Rev: 140804-1600
www.snapav.com | Support: 866.838.5052
Loading...