Sensata Technologies PM22 Series Data Sheet

PM22 Series

For options only and not required for valid part number

Switching Type

Not Included

Rated Load Current

AC Output Panel Mount Solid State Relays

• Ratings up to 95 Amps at 600 VAC

• Built-in overvoltage transient protection

• DBC substrate for superior thermal performance

• LED input status indicator

• IP20 touch safe housing

• AC or DC control voltage options

• 4000 VAC optical isolation

• C-UL-US Recognized and TUV approved

Output Specifications (A) PM2260x25x PM2260x50x PM2260x95x

Operating Voltage (47-440 Hz) [V
Transient Overvoltage [Vpk]

Maxumum Off-State Leakage Current @ Rated Voltage [mA
Minimum Off-State dV/dt @ Maximum Rated Voltage [V/μsec] 500 500 500

Load Current, General Use UL508/LC A IEC 62314 @ 40°C [A

Load Current, Motor Starting UL508 FLA /LC B IEC 62314 @ 40°C [A

Minimum Load Current [mA
Maximum 1 Cycle Surge Current (50/60 Hz) [Apk] 286/300 716/750 1290/1350

Maximum On-State Voltage Drop @ Rated Current [Vpk] 1.35 1.35 1.30

Thermal Resistance Junction to Case (Rjc) [ºC/W] 0.49 0.27 0.2

Maximum 1/2 Cycle I² t for Fusing (50/60 Hz) [A²sec] 409/375 2563/2343 8320/7593

Minimum Power Factor (at Maximum load) 0.5 0.5 0.5

Minimum Heat sink for Rated Current @ 40ºC 2 0.7 0.23

Motor Rating UL 508/IEC62314 [HP (kW)]: 120 VAC 0.5 (0.37) 1 (0.74) 2 (1.5)

Motor Rating UL 508/IEC62314 [HP (kW)]: 240 VAC 1.5 (1.1) 3 (2.2) 5 (3.73)

Motor Rating UL 508/IEC62314 [HP (kW)]: 480 VAC 3 (2.24) 5 (3.7) 10 (7.4)

]

RMS

(B)

]

RMS

]

RMS

] (M)

RMS

] (M)

RMS

48-600 48-600 48-600

1200 1200 1200

1 1 1

25 50 95

8.5/4.8 14/7.6 26/14

100 100 150

Input Specifications (A) PM2260Axx PM2260Dxx

Control Voltage Range
Maximum Reverse Voltage - -32 VDC

Minimum Turn-On Voltage 90 VAC/VDC 4 VDC

Must Turn-Off Voltage 5 VAC/VDC 1 VDC

Minimum Input Current (for on-state) [mA] 6 10

Maximum Input Current [mA] 10 15

Nominal Input Impedance [Ohms] Current Limited Current Limited

Maximum Turn-On time 20 msec

Maximum Turn-Off time 30 msec 1/2 cycle

90-280 VAC/VDC

(E) 4-32 VDC (F)

1/2 Cycle

General Specifications PM2260xxx

Dielectric Strength, Input to Output (50/60 Hz) [V
Dielectric Strength, Input/Output/Case (50/60 Hz) [V
Minimum Insulation Resistance (@ 500 VDC) [Ohms]

Maximum Capacitance, Input/Output [pF] 8

Ambient Operating Temperature Range [ºC]

Ambient Storage Temperature Range [ºC] -40 to 100

Short Circuit Current Rating [kA]

LED Input Status Indicator Green

Weight (Typical) [oz] (g) 2.3 (64)

Housing Material UL94 V-0

Baseplate Material Aluminum

Hardware Finish Nickel Plating

Humidity 85% non-condensing

(J)

]

RMS

]

RMS

(H)

Part Number Nomenclature

4000
4000

9

10

-40 to 80

100

Mechanical Dimensions

Tolerances: ±0.02 in / 0.5 mm

25: 25 Amps

Series

Operating Voltage
60: 48-600 VAC

PM22 60 A R

Control Voltage
A: 90-280 VAC/VDC

50: 50 Amps
95: 95 Amps [High I

25

(N)

2

t]

U

V UH

Terminal Layout
V: Contactor Configuration

D: 4-32 VDC

Required for valid part number

Blank: Zero Voltage
Turn-On

R: Instantaneous Turn-On

J

Input Connector
Blank: Screw Terminal
J: Spring Terminal

Thermal Pad
Blank:
H: Included

All dimensions are in: inches [millimeters]

1/L1

2.85

[72.3]

2/T1

+3/A1 -4/A2

0.89

[22.5]

(G)

1.87

[47.5]

1.88

[47.8]

3.62

[91.9]

1.19

[30.2]

Derating Curves

25

20

15

10

5

Load Current (Amps)

0

20 30 40 50 60 70 80

50

40

30

20

10

Load Current (Amps)

0

20 30 40 50 60 70 80

0.25ºC/W

100

80

60

40

20

Load Current (Amps)

0

20 30 40 50 60 70 80

(H)

PM2260x25V

2ºC/W

Ambient Temperature (ºC)

PM2260x50V

0.7ºC/W

Ambient Temperature (ºC)

PM2260x95V

0.36ºC/W

Ambient Temperature (ºC)

3ºC/W

1ºC/W

0.5ºC/W 2.5ºC/W

5ºC/W

2.5ºC/W

Recommended Accessories for PM22 Series

Connectors ID

Marker

CP201

CP202

CNLB

CNLN

CNL2

Hardware

Kit

HK8 HS259DR

New Accessories!

Connectors

Part number: CP201, CP202

Pluggable input connectors, 2 position, with screw terminals (CP201) or spring
type terminals(CP202). Compatible with Contactor configuration NOVA22 SSRs.

Hardware Kit

Part number: HK8

Bag with 2 SSR mounting screws 8-32 x 3/8, Hex Socket Cap, compatible
with PM22 Series Panel Mount SSRs. Used to mount the SSR onto any of our
compatible heat sinks.

Heat Sink

Part number: HS259DR

DIN Rail mountable heat sink with 2.5°C/W thermal resistance. Heat sink material
is aluminum with black anodized finish. Suitable for mounting a single PM22
Series Panel Mount SSR.

Heat Sink

Part No.

HS073

HS072

HS053

HS033

HS023

Thermal Resistance

[ºC/W]

2.5

0.7

0.7

0.5

0.36

0.25

Module Thermal

Pad

DRML1 HSP-7

General Notes

(A) All parameters at 25ºC unless otherwise specified.
(B) Output will self trigger between 900-1200 Vpk. Not suitable for capacitive loads.
(E) Above 40ºC ambient temperature the maximum control voltage must not exceed

250 VAC/VDC.

(F) Increase minimum voltage by 1 V for operations from -20 to -40ºC.
(G) Turn-On Time for Instantaneous Turn-On versions is 0.1 msec.
(H) Operating range -20 to 60ºC for AC control models only.
(M) Heat sink required, see derating curves.
(N) Control voltage 18-52 VAC/VDC is available upon request.

Load Monitoring Module

Part number: DRML1

Load monitoring module with a total current range from 1.2 to 50 Amps at 600
VAC. Compatible with DIN Rail and Panel Mount NOVA SSRs (DR2260DxxV/W &
PM2260DxxV).

Lug Terminal

Part number: TRM0

Copper wire lug for AWG 6 (13.3 mm²) to AWG 0 (53.5 mm²) wire size. For use with
"Elevator" screw option ("W" suffix) NOVA22 SSRs.

Thermal Pad

Part number: HSP-7

Non-adhesive thermal pad for half-puck package SSRs. Compatible with PM22
Series Panel Mount SSRs.