Sennheiser Electronic SEBT2 Users Manual
เครื่องวิทยุคมนาคมนี้ ได้รับยกเว้น ไม่ต้องได้รับใบอนุญาตให้มี ใช้ซึ่งเครื่องวิทยุคมนาคม หรือตั้ง
สถานีวิทยุคมนาคมตามประกาศ กสทช. เรื่อง เครื่องวิทยุคมนาคม และสถานีวิทยุคมนาคมที่ได้รับ
ยกเว้นไม่ต้องได้รับใบอนุญาตวิทยุคมนาคม ตามพระราชบัญญัติวิทยุคมนาคม พ.ศ. 2498
Print specs:
인증 번호 (Certificate): R-C-SE9-SEBT2
상 호 명 (Applicant): Sennheiser electronic GmbH & Co. KG
품명 (Product name): 특정소출력 무선기기
모델명 (Model): SEBT2
제조연월 (Date): See label
제조자 (Manufacturer): Sennheiser electronic GmbH & Co. KG
제조국 (Country of origin): 중국/China
Paper grammage: 70 gsm Guide delivery: Folded
Print colours: K (1C) Paper quality: woodfree
Open size: 150 x 190 mm Close size: 75 x 95 mm
Release date: 07. Oct. 2019 (A0
CX 150BT Compliance Information
Frequency band: 2400 – 2483.5 MHz
Transmit power: 20 mW (max.)
Country/Region SEBT2
USA
FCC ID: DMOSEBT2
2); change to SEBT2
Canada
Europe
Australia/New Zealand
Singapore
South Korea
Thailand
IC: 2099A-SEBT2
CAN ICES-3 (B)/NMB-3(B)
Complies with
IMDA Standards
DB100582
CX_150BT_CS_587109_0919_A01_PRT_languages_with_numbers_SEBT2.indd 1 07.10.2019 13:17:23
Statements regarding FCC and Industry
Canada
This device complies with Part 15 of the FCC rules and RSS-247
of Industry Canada. Operation is subject to the following two
conditions: 1) This device may not cause harmful interference,
and 2) This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules and RSS-247 of Industry Canada. These limits are designed
to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or
approved by Sennheiser electronic Corp. may void FCC authorization to operate this equipment.
Déclaration requise par la FCC et l’Industrie Canada
Cet appareil est conforme à la Partie 15 des réglementations de
la FCC et à la norme CNR-247 d’Industrie Canada. L’utilisation
de l’appareil doit respecter les deux conditions suivantes : (1)
L’appareil ne doit pas produire d’interférences nuisibles, et, (2)
il doit accepter toutes interférences reçues, y compris celles qui
pourraient avoir des effets non désirés sur son fonctionnement.
CAN ICES-3 (B)/NMB-3(B)
RF Radiation Exposure Information
Since the radiated output power of this device is far below the
FCC / IC radio frequency exposure limits, it is not subjected to
routine RF exposure evaluation as per Section 2.1093 of the FCC
rules and RSS-102 of Industry Canada.
This device meets FCC/ IC RF exposure guidelines for an uncontrolled environment. Use of other accessories not verified by the
manufacturer may not ensure compliance with FCC / IC RF exposure guidelines.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
modifications made to this equipment not expressly
Information sur l’exposition aux radiofréquences
La puissance RF rayonnée de cet appareil étant de loin inférieure aux limites imposées par la FCC / IC, il n’est pas soumis à la
réglementation sur l’exposition aux RF selon la section 2.1093 de
la réglementation FCC et CNR-102 de Industrie Canada.
Cet équipement est conforme aux limites d‘exposition aux rayonnements imposées par la FCC / IC pour un environ- nement
non réglementé. L‘utilisation d‘autres accessoires non homologués par le fabricant remet en cause la conformité des normes
imposées par la FCC / IC.
Cet émetteur ne doit pas être positionné à proximité d‘une autre
antenne ou d‘un autre émetteur, ni utilisé avec une autre antenne
ou un autre émetteur.
For Taiwan:
經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用
者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。
低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現
有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前
項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機
須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干
擾。
Sennheiser electronic GmbH & Co. KG
Am Labor 1, 30900 Wedemark, Germany
www.sennheiser.com
Printed in China, Publ. 10/19, 587167/A02, 770-00245
CX_150BT_CS_587109_0919_A01_PRT_languages_with_numbers_SEBT2.indd 2 07.10.2019 13:17:23
Loading...