Sennheiser Electronic IENBT Users Manual
IE 80S BT
Bluetooth® ear-canal headphones
IEN BT, I
E 80 S
Instruction manual
Use the search function, the navigation (left) or the following links:
Start
“Product overview”
“Getting started”
“Using the headphones”
“FAQ/If a problem occurs ...”
“Specifications”
Sennheiser electronic GmbH & Co. KG
Am Labor 1
30900 Wedemark
Germany
www.sennheiser.com
Version: 06/19 A01
Important safety instructions
Important safety instructions
▷ Read this instruction manual carefully and completely before
using the product.
▷ Always include this instruction manual when passing the product
on to third parties.
▷ Do not use an obviously defective product.
▷ Only use the product in environments where Bluetooth wireless
transmission is permitted.
Preventing damage to health and accidents
▷ Protect your hearing from high volume levels. Permanent
hearing damage may occur when headphones are used
at high volume levels for long periods of time. Sennheiser
headphones sound exceptionally good at low and medium volume
levels.
▷ The product generates stronger permanent magnetic
fields that could cause interference with cardiac pacemakers, implanted defibrillators (ICDs) and other
plants. Always maintain a distance of at least 3.94"/10 cm
im
between the product component containing the magnet and the
cardiac pacemaker, implanted defibrillator, or other implant.
▷ Do not insert the earphones too deep into your ears and never
insert them without ear adapters. Always remove the earphones
slowly and carefully from your ears.
▷ Keep the product, accessories and packaging parts out of reach
of children and pets to prevent accidents. Swallowing and choking hazard.
▷ Do not use the product in an environment that requires your spe-
cial attention (e.g. in traffic or when performing skilled jobs).
Preventing damage to the product and malfunctions
▷ Always keep the product dry and do not expose it to extreme tem-
peratures (hairdryer, heater, extended exposure to sunlight, etc.)
o avoid corrosion or deformation.
t
▷ Use only attachments/accessories/spare parts supplied or rec-
ommended by Sennheiser.
▷ Clean the product only with a soft, dry cloth.
Safety instructions for Lithium-Polym
WARNING
If abused or misused, the rechargeable batteries may leak.
In extreme cases, they may even present a risk of:
•explosion,
• fire development,
• heat generation,
•smoke or gas development.
er rechargeable batteries
2 | IE 80S BT
Important safety instructions
Only use rechargeable batteries and chargers
recommended by Sennheiser.
Charge products with built-in rechargeable batteries at
ambient temperatures between 10 and 40°C/50 and
104°F.
Do not heat above 60 °C/140 °F, e.g. do not expose to
sunlight or throw into fire.
When not using the product for extended periods of
time, charge its built-in rechargeable battery regularly
(about every 3 months).
Switch rechargeable battery-powered products off after
use.
Dispose of defective products with built-in rechargeable
batteries at special collection points or return them to
your specialist dealer.
Notes on data collection and processing and on firmware updates
This product stores individual settings such as the volume and the
Blu
etooth addresses of paired devices. This data is required for the
operation of the product and is not transferred to Sennheiser or companies commissioned by Sennheise
Using the “Sennheiser Smart Control” ap
r and is not processed.
p, you can update the firm-
ware of the product for free via an Internet connection. If the device
which the app is installed is connected to the Internet, the follow-
on
ing data is automatically transferred to and processed by Sennheiser
rvers in order to provide and transfer suitable firmware updates:
se
MAC address, Bluetooth Low Energy UUID, Bluetooth name of the
product, firmware version of the product and version of the app. The
data will only be used as specified and will not be stored permanently.
If you do not want this data to be transferred and processed, do not
onnect to the Internet.
c
Intended use/Liability
These headphones have been designed as an accessory for Bluetooth compliant devices. They are intended for wireless audio communication such as music playback an
d phone calls via Bluetooth
wireless technology.
It is considered improper use when the product is used for any application not named in the corresponding product documentation.
Sennheiser does not accept liability for damage arising from misuse
or improper use of this pr
oduct and its attachments/accessories.
Sennheiser is not liable for damages to USB devices that are not consistent with the USB specifications. Sennheiser is not liable for damages resulting from the loss of connection
due to flat or overaged
rechargeable batteries or exceeding the Bluetooth transmission
range.
Before putting into operation, please observe the respective country-specific regulations.
IE 80S BT | 3
Package contents
Package contents
Earphones (IE 80 S)
Detachable Bluetooth® Neckband (IEN BT)
Carry case
USB charging cable with USB-C and
USB-A connector, approx. 1,0 m
Ear adapter set made of:
• silicone (size S, M (pre-mounted upon delivery), L)
• lamellar silicone (size S, M, L)
• memory foam from Comply™ (siz
Cleaning tool / bass adjustment tool
Quick guide
Safety guide
Online you can find:
• this detailed instruction manual and ad
(www.sennheiser.com/download)
• the Sennheiser Smart Control app for configuring the headphones and for additional functions
(www.sennheiser.com/smartcontrol)
ditional information
e S, M, L)
4 | IE 80S BT
You can find a list of accessories on the IE 80S BT product page
at www.sennheiser.com.
Contact your local Sennheiser partner: www.sennheiser.com >
“Service & Support”.
Product overview
ON
245
3
8 9 00
A B C
2
3
1
67
OFF
PAIRING
MUSIC
TELEPHONE
B
4
Product overview
Headphones
IE 80S BT
Ear hooks
Earphones (IE 80 S)
Ear adapters (interchangeable)
Bass control
Detachable Bluetooth® Neckband (IEN BT)
USB-C socket for charging the rechargeable battery
Cover for USB-C socket
Voice assistant button
LED
Microphone
Volume + button (volume up)
IE 80S BT | 5
Product overview
Multi-function button for:
•music functions
• call functions
• pairing function
Pressing for 2 sec: headphones switch ON
Pressing again for 2 sec: activates Bluetooth pairing mode
Pressing for 3 sec: headphones switch OFF
Volume - button (volume down)
Overview of the LED indications of the headphones
LED Meaning; the headphones
pulses yellow are being charged
lights up green are fully charged
lights up green
for approx. 3 sec
flashes red-blue
for approx. 1 min
lights up blue
for approx. 3 sec
lights up red
for approx. 3
flashes blue
flashes red
quickly
lights up red
flashes red 3x are switched off
are switched on
are in Bluetooth pairing mode
are connected to a device via
Bluetooth
connection has been interrupted
sec
are not connected to a device via
Bluetooth
rechargeable battery is almost
empty
System error – perform a restart (>
)
26
6 | IE 80S BT
If the LED does not light up immediately during charging, clean
the charging socket and charge the headphones until the LED
lights up again (>
10).
Product overview
Notes on voice prompts
The headphones output voice prompts for the following functions.
Using the Smart Control app, you can change the language of the
voice prompts, choose between voice prompts and beep sounds, or
deactivate the status messages with a few exceptions (e.g.
rechargeable battery is empty).
Voice prompt Meaning/headphones
“Power on”
“Power off” are switched off
“Device (1) (2) connected”
“No connection” are not connected via Bluetooth
“Pairing”
“Pairing successful” Bluetooth pairing successful
“No device found”
“Call rejected” incoming call rejected
“Call ended”
“Mute on” microphone is muted, active call is
“Mute off”
“More than xx % battery left” rechargeable battery has the stated
“Recharge headset” rechargeable battery is empty –
are switched on
are connected to device 1 or 2
are in Bluetooth pairing mode
cannot connect to a paired device
call ended
put on hold
microphone is reactivated
charge level
re
charge the headphones
Notes on beeps/acoustic signals
The headphones output beeps/acoustic signals for the following
functions.
Acoustic signal Meaning/headphones...
2x low-pitched beep
2x high-pitched beep maximum volume is reached
minimum volume is reached
IE 80S BT | 7
Getting started
USB-C USB-A
4s
Hold
Getting started
1. Charging the rechargeable battery
The headphones' rechargeable battery is not fully charged upon
delivery. Before using the headphones for the first time, charge the
rechargeable battery for a complete charging cycle without interruption (> 10).
2. Installing the Smart Control app on your
smartphone
The Sennheiser Smart Control app allows you to use all functions
and settings of the headphones and to e.g. adjust the sound to your
liking using the equalizer (> 13).
3. Connecting the headphones to a Bluetooth
device
Connect the headphones to your smartphone via Bluetooth
(> 11).
8 | IE 80S BT
Getting started
LMS
LMS
LMS
Silicone
ear adapters
Comply
ear adapters
Lamellar silicone
ear adapters
4. Selecting suitable ear adapters for optimum
fit of the headphones
The perceived sound quality and bass performance depends to a
large extent on the correct fit of the headphones in the ear.
▷ Test which ear adapter size gives you the best sound quality and
the best wearing comfort.
▷ You can choose between:
• silicone ear adapters,
• lamellar silicone ear adapters and
• memory foam ear adapters from Comply™.
▷ All ear adapters are available in size S, M and L. The ear adapters
must fit snugly in the ear canal and completely seal your ears (>
14).
▷ Loop the ear hook over your ear from behind.
▷ Insert the earphones at a slight angle into the ears and twist them
slightly into the ear canal so that they fit comfortably and snugly
in the ear canal.
IE 80S BT | 9
Loading...