•Please read this instruction manual carefully and completely before
using the product.
•Make this instruction manual easily accessible to all users at all times.
Always include this instruction manual when passing the product on to
third parties.
•Do not use the product in situations which require special attention
(e.g. in traffic or when performing skilled jobs).
•Always keep the product dry and do not expose it to extreme
temperatures (normal operating temperatures: 0 °C/32 °F to 40 °C/
104 °F).
• Use the product with care and store it in a clean, dust-free
environment.
•Switch the headphones off after use to conserve battery power.
Remove the batteries if the product will not be used for extended
periods of time.
•The headphones contain magnets that generate a magnetic field which
could cause interference with cardiac pacemakers and implanted
defibrillators. Keep the headphones at least 1.2” (3 cm) from cardiac
pacemakers or implanted defibrillators.
•Please protect your hearing from high volume levels. Sennheiser
headphones also sound exceptionally good at low volumes.
•Only use the Sennheiser supplied power supply units.
•To reduce the risk of fire or electric shock, do not use the product near
water and do not expose it to rain or moisture.
•Unplug the power supply unit from the wall socket
– to completely disconnect the product from the mains
– during lightning storms or
– when unused for long periods of time.
•Only operate the power supply unit from the type of power source
specified in the chapter “Specifications” (see page 31).
•Ensure that the power supply unit is
– in a safe operating condition and easily accessible,
– properly plugged into the wall socket,
– only operated within the permissible temperature range,
– not covered or exposed to direct sunlight for longer periods of time
in order to prevent heat accumulation (see “Specifications” on
page 31).
•Do not operate the product near any heat sources.
•Only use attachments/accessories specified by Sennheiser (see
“Accessories and spare part” on page 30).
2
Important safety information
Replacement parts
When replacement parts are required, be sure the service technician uses
replacement parts specified by Sennheiser or those having the same
characteristics as the original part. Unauthorized substitutions may result
in fire, electric shock, or other hazards.
Intended use
Intended use of the product includes
•having read this instruction manual, especially the chapter “Important
safety instructions” on page 2,
•using the product within the operating conditions and limitations
described in this instruction manual.
“Improper use” means using the product other than as described in this
instruction manual, or under operating conditions which differ from those
described herein.
Safety instructions for the NiMH rechargeable batteries
If abused or misused, the rechargeable batteries may leak. In extreme
cases, they may even present
•a heat hazard,
•a fire hazard,
•an explosion hazard,
•a smoke or gas hazard.
Please understand that Sennheiser does not accept liability for damage
arising from abuse or misuse.
Keep away from
children.
Only use rechargeable batteries
recommended by Sennheiser.
Observe correct polarity.Do not short-circuit.
Do not expose to
moisture.
Do not pack charged
batteries loose – danger
of shorting out/fire
hazard.
Only charge
rechargeable batteries
at ambient
Switch rechargeable batterypowered products off after use.
When not using rechargeable
batteries for extended periods
of time, charge them regularly
(about every 3 months).
Do not heat above 70 °C/
158 °F, e.g. do not expose to
sunlight or throw into a fire.
temperatures between
10 °C/50 °F and 40 °C/
104 °F.
Do not mutilate or
dismantle.
Do not continue to use
defective rechargeable
batteries.
Immediately remove
rechargeable batteries
from obviously
defective devices.
Dispose of rechargeable
batteries at special collection
points or return it to your
specialist dealer.
3
The RS 160 digital RF headphone system
The RS 160 digital RF headphone system
The RS 160 is an RF stereo hi-fi headphone system with comprehensive
technical features. Its transparent and balanced sound image with
excellent bass response makes this system an ideal choice for hi-fi, home
cinema and TV use.
Enjoy total freedom of sound, stylish design and maximum comfort.
Additional features of the RS 160 headphone system
•Transmits uncompressed audio over a robust 2.4 GHz digital link,
enabling you to enjoy your music without the hassles of cables.
•Dynamic transducer systems with powerful neodymium magnets
deliver clear and detailed audio reproduction.
•Kleer’s uncompressed digital wireless transmission delivers CD-quality
sound.
•No set-up required – just plug and play. Simply connect the transmitter
to your personal audio/video player, put on the headphones and turn
it on!
•TR 160 transmitter with multi-receiver capability, enabling up to
4 people to listen to the same sound source.
TM
Kleer
The RS 160 headphone system features the digital wireless audio
transmission technology from Kleer. The Kleer company has developed an
RF-based wireless transmission standard (of the same name) that offers
lossless audio transmission in CD-quality while consuming minimal power.
wireless transmission technology
4
Delivery includes
Delivery includes
1 HDR 160 headphones
1 TR 160 transmitter
1 power supply unit with country adapters
1 stereo audio cable with 3.5 mm jack plugs
1 DC cable (4.0 mm DC jack socket to 2 x 4.0 mm DC plug)
2 AAA size NiMH rechargeable batteries, 1.2 V
1 quick guide incl. CD ROM with detailed instruction manual (PDF file)
1safety guide
5
Loading...
+ 12 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.