Sennheiser Electronic BTD300I User Manual

BTD 300i

Instruction Manual

Notice d’emploi

Manual de instrucciones

Manual de utilização

Bedienungsanleitung

Istruzioni per l’uso

Gebruiksaanwijzing

BTD300i_91x100_SP7.book Seite 1 Mittwoch, 29. April 2009 10:13 10

BTD300i_91x100_SP7.book Seite 2 Mittwoch, 29. April 2009 10:13 10

BTD300i_91x100_SP7.book Seite 1 Mittwoch, 29. April 2009 10:13 10

English

Français

Español

Português

Deutsch

Italiano

Nederlands

BTD300i_91x100_SP7.book Seite 2 Mittwoch, 29. April 2009 10:13 10

BTD300i_91x100_SP7.book Seite 1 Mittwoch, 29. April 2009 10:13 10

Important safety information

• Please read this instruction manual carefully and completely before using the device.

• Make this instruction manual easily accessible to all users at all times. Always include this instruction manual when passing the device on to third parties.

• Always keep the device dry and do not expose it to extreme temperatures.

BTD300i_91x100_SP7.book Seite 2 Mittwoch, 29. April 2009 10:13 10

Safety instructions for Bluetooth devices

• The radio waves of a Bluetooth

device can impair

the operation of electronic and medical devices.

• Do not use the device in medical facilities and aircraft, and close to automatic doors, automatic fire alarms or other automatically controlled devices.

• Keep this device at least 20 cm from pacemakers. Radio waves can impair the operation of pacemakers.

BTD300i_91x100_SP7.book Seite 3 Mittwoch, 29. April 2009 10:13 10

Intended use

Intended use of the device includes:

• having read this instruction manual, especially the chapter “Important safety information” on page 1,

• using the device within the operating conditions and limitations described in this instruction manual.

“Improper use” means using the device other than as described in this instruction manual, or under operating conditions which differ from those described herein.

BTD300i_91x100_SP7.book Seite 4 Mittwoch, 29. April 2009 10:13 10

BTD 300i

If your iPod/iPhone does not support the Bluetooth stereo audio profile (A2DP) or the Bluetooth audio/ video remote control profile (AVRCP), you can use the BTD 300i adapter. The BTD 300i allows you to extend the functionality of your iPod/iPhone by adding support for these Bluetooth profiles.

Bluetooth wireless technology provides an interface for wireless communication between your iPod/ iPhone and other Bluetooth enabled devices.

Delivery includes

1 BTD 300i adapter 1 instruction manual

BTD300i_91x100_SP7.book Seite 5 Mittwoch, 29. April 2009 10:13 10

iPod/iPhone generations

The BTD 300i is only compatible with the following iPods/iPhones:

Works with

iPhone iPhone 3G

Made for

iPod touch (2nd generation) iPod touch (1st generation) iPod nano (4th generation) iPod nano (3rd generation) iPod nano (2nd generation) iPod nano (1st generation) iPod mini (2nd generation) iPod mini (1st generation) iPod classic iPod with video

BTD300i_91x100_SP7.book Seite 6 Mittwoch, 29. April 2009 10:13 10

Connecting the BTD 300i

BTD300i_91x100_SP7.book Seite 7 Mittwoch, 29. April 2009 10:13 10

Pairing the BTD 300i (I)

왘 Make sure that your device is in pairing mode

(see the instruction manual of your headphones or loudspeaker system).

If your device is already paired with several Bluetooth devices, this process can take up to 30 seconds.

Memory function

The BTD 300i can save the connection profiles of up to 5 Bluetooth devices with which it has been paired. After switch-on, it automatically connects to one of these devices.

If you pair the BTD 300i with a sixth audio source, the saved connection profile of the first Bluetooth device will be overwritten.

BTD300i_91x100_SP7.book Seite 8 Mittwoch, 29. April 2009 10:13 10

BTD300i_91x100_SP7.book Seite 9 Mittwoch, 29. April 2009 10:13 10

Pairing the BTD 300i (II)

BTD300i_91x100_US.fm Seite 10 Freitag, 15. Mai 2009 12:45 12

If the BTD 300i does not detect a Bluetooth device, it switches off after 5 minutes.

왘 Reconnect the BTD 300i in order to pair it with a

new Bluetooth device.

Specifications

Input voltage 3,3 V Input current max. 0.06 A

Bluetooth

version 2.0 + EDR

Range up to 10 m Transmission frequency 2.4 GHz Protocols A2DP, AVRCP Codecs

SBC, apt-X

BTD300i_91x100_SP7.book Seite 11 Mittwoch, 29. April 2009 10:13 10

Manufacturer Declarations

Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on this product. For the current warranty conditions, please visit our web site at www.sennheiser.com or contact your Sennheiser partner.

Declaration of Conformity

This device complies with the basic requirements and other relevant provisions of the following directives:

• R&TTE Directive (1999/5/EC)

• RoHS Directive (2002/95/EC)

• WEEE Directive (2002/96/EC)

The declaration is available at www.sennheiser.com. Before putting the device into operation, please observe the respective country-specific regulations!

BTD300i_91x100_SP7.book Seite 12 Mittwoch, 29. April 2009 10:13 10

In compliance with:

USA FCC ID: DMOBTD300I

Canada IC: 2099A-BTD300I Europe

0560

Bluetooth

QD ID B015372

The Bluetooth

word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sennheiser electronic GmbH & Co. KG is under license.

is a registered trademark of Audio Processing

apt-X Technology Ltd.

BTD300i_91x100_SP7.book Seite 13 Mittwoch, 29. April 2009 10:13 10

iPhone and iPod are registered trademarks of Apple Inc. in the U.S. and other countries.

“Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards.

“Works with iPhone” means that an electronic accessory has been designed to connect specifically to iPhone and has been certified by the developer to meet Apple performance standards.

Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.

BTD300i_91x100_SP7.book Seite 14 Mittwoch, 29. April 2009 10:13 10

Statements regarding FCC and Industry Canada

This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

+ 41 hidden pages