Active Transmitter Combiner 8:1
AC 3200
Instruction manual
Contents
Contents
Important safety instructions ..................................................... 2
The AC 3200 active transmitter combiner 8:1 ......................... 5
Delivery includes ............................................................................. 5
Connection diagram ....................................................................... 6
Product overview ............................................................................ 7
Putting the AC 3200 into operation ........................................... 8
Preparing the AC 3200 for use ............................................... 8
Connecting the antenna ......................................................... 10
Connecting a transmitter to the AC 3200 .......................... 10
Connecting the mains cable .................................................. 11
Switching the AC 3200 on and off ....................................... 11
Recommendations and tips for optimum reception ............ 12
Cleaning the AC 3200 ................................................................... 12
If a problem occurs ... ................................................................... 13
Accessories and spare parts ....................................................... 14
Specifications ................................................................................. 15
Manufacturer Declarations ......................................................... 16
1
Important safety instructions
Important safety instructions
1. Read these instructions.
2. Keep these instructions. Always include these instructions when passing the
device on to third parties.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use the device near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with these
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or
other devices (including amplifiers) that produce heat.
9. The device should be operated only from the type of power source indicated on
the mains plug. The device must only be connected to properly grounded power
outlets.
10. Protect the mains cable from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where it exits from the device.
11. Only use attachments/accessories specified by Sennheiser.
12. Use only with the cart, stand, tripod, bracket, or table specified
by the manufacturer, or sold with the device. When a cart is
used, use caution when moving the cart/apparatus combination
to avoid injury from tip-over.
13. Unplug the device during lightning storms or when unused for long periods of
time.
14. Refer all servicing to qualified service personnel.
Servicing is required if the device has been damaged in any way, such as mains
cable or plug damage, liquid has been spilled, objects have fallen inside, the
device has been exposed to rain or moisture, does not operate properly or has
been dropped.
15. To completely disconnect the device from the AC mains, disconnect the mains
plug from the AC receptacle.
16. WARNING: To reduce the risk of fire or electric shock, do not expose the device to
rain or moisture.
17. Do not expose the device to dripping or splashing and ensure that no objects
filled with liquids, such as vases or coffee cups, are placed on the device.
18. The plug of the mains cable shall remain readily operable and easily accessible.
2
Important safety instructions
Hazard warnings on the rear of the
AC 3200 active transmitter combiner 8:1
The label shown on the left is attached to the rear of the
AC 3200. The symbols on this label have the following meaning:
This symbol is intended to alert the user to the presence of
uninsulated dangerous voltage within the AC 3200’s enclosure
that may be of sufficient magnitude to constitute risk of fire or
electric shock.
This symbol is intended to alert the user to the risk of electric
shock if the AC 3200 is opened. There are no user serviceable
parts inside. Refer servicing to qualified personnel only.
This symbol is intended to alert the user to the presence of
important operating and maintenance instructions in the
literature accompanying this AC 3200.
Overloading
Do not overload wall outlets and extension cables as this may
result in fire and electric shock.
Replacement parts
When replacement parts are required, be sure the service
technician has used replacement parts specified by Sennheiser
or those having the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock, or
other hazards.
Safety check
Upon completion of any service or repairs to this device, ask the
service technician to perform safety checks to determine that
the device is in a safe operating condition.
3
Important safety instructions
Intended use of the device
Intended use of the AC 3200 includes:
y using the device for professional purposes,
y having read this instruction manual especially the chapter
“Important safety instructions” on page 2,
y using the device within the operating conditions and
limitations described in this instruction manual.
“Improper use” means using the device other than as described
in this instruction manual, or under operating conditions which
differ from those described herein.
4