Sennheiser TeamConnect Ceiling 2 Data Sheet
PRODUCT SPECIFICATION
TeamConnect Ceiling 2
Ceiling microphone array
FEATURES
• Ceiling microphone array with patented automatic
speaker position detection and dynamic beamforming
for best speech intelligibility
• Analog and digital (Dante™) audio outputs for easy
connectivity to video and audio conference systems
• Configuration and monitoring via Sennheiser´s unique
Control Cockpit software
• Open API for media and camera control applications
• Several installation options via suspension kit, flushmount or surface bracket
1/7
TeamConnect Ceiling 2 offers superior audio quality for
voice and video conferences. Thanks to Sennheiser’s patented adaptive beamforming technology it automatically
follows the active speaker’s voice, letting people speak
naturally – whether they are sitting, standing or walking
around the room. TeamConnect Ceiling 2 offers great
versatility and interoperability with support for Dante™
networks and Power over Ethernet. It is compatible with
Sennheiser’s Control Cockpit software for efficient remote
management, and offers remote configuration and monitoring via an open media control protocol (API), allowing for
easy integration into media systems.
DELIVERY INCLUDES
• SL Ceiling Mic 2
• 3-pin Phoenix Connector (3.81 mm)
• 8 self-adhesive rubber feet
• Instrucion manual
• Supplement sheet with manufacturer declarations
CONTROL SOFTWARE
Sennheiser Control Cockpit
free download at:
www.sennheiser.com/control-cockpit-software
ACCESSORIES
SL CM FB Ceiling mounting
frame
SL CM EB US Extension brackets
(for 2 ft ceiling grid)
SL CM EB 625 Extension brackets
(for 625 mm ceiling
grid)
SL CM SK Ceiling suspension
kit
SL CM VB VESA adapter Art. no. 508620
Art. no. 506846
Art. no. 508528
Art. no. 508290
Art. no. 508291
PRODUCT SPECIFICATION
TeamConnect Ceiling 2
Ceiling microphone array
2/7
SPECIFICATIONS
Product properties
Dimensions
(L x B x H)
Weight 5670 g (12.5 lbs)
Audio Output 1 x 3-pin terminals (fits Phoenix
Ethernet / Control 1 x RJ-45 Ethernet Port for PoE
Supply voltage 44 – 57 V DC
Power consumption max. 8.8 W
Plenum rating Tested according to UL 2043
Acoustic properties
590 x 590 x 43 mm
contact MCVW 1.5-3-ST-3.81)
2 x Digital Dante Network Audio
(RJ-45 Primary and Secondary)
power supply and data/control
communication
PoE IEEE 802.3af Class 3
INSTALLATION VARIANTS
Variant 1
installed flush in a dropped/coffered
ceiling (600 x 600 mm)
Accessories:
SL CM EB US (590 mm to 2 ft) or
SL CM EB 625 (590 mm to 625 mm)
angle brackets
Variant 2
mounted directly below the ceiling
Transducer principle Pre-polarized condenser micro-
phone
AF frequency response 160 Hz - 18,000 Hz
Sensitivity 0 dBV/Pa (988 mV/Pa)
Signal-to-noise ratio 83 dB (A)
Latency 4 ms
Equivalent noise level 11 dB (A)
Number of KE 10-237
mikrofon capsules
Pick-up pattern Beam Pattern
Max. sound pressure
level
Dynamic range 93 dB (A)
Ambient conditions
Temperature Operation:
28
104 dB SPL
Storage:
...0 - 40°C
(32 - 104 °F)
-10 - 60°C
(14 - 140 °F)
Accessories:
SL CM FB Ceiling mounting frame
Variant 3
suspended from the ceiling
Realtive air humidity 20 – 95 %,
non-condensing
Accessories:
SL CM SK Ceiling suspension set
DIMENSIONS
SL Ceiling Mic 2
PRODUCT SPECIFICATION
TeamConnect Ceiling 2
Ceiling microphone array
3/7
43
590.3
420
590.3
10
6.5
3225.9
49.8
73
128
92.7
32.7
420
CONNECTIONS AND OPERATING ELEMENTS
Analog OutDante Ethernet
Primary ResetSecondary
Dante Dante™ interface with two RJ 45 sockets
Primary and Secondary
Reset Factory reset switch
Analog Out 3-pin terminal for analog audio out
Ethernet RJ 45 socket for network control and PoE
PoE/Ctrl
Loading...