Sennheiser SL CM EB 625, SL CM EB US, SL CM FB, SL CM SK, SL CM VB Users Manual

TeamConnect Ceiling 2

Instruction manual

Sennheiser electronic GmbH & Co. KG

Am Labor 1, 30900 Wedemark, Germany, www.sennheiser.com

Publ. 12/18

Inhaltsverzeichnis

Important safety instructions....................................................2

Intended use .............................................................. 2

Safety instructions for installation ............................................ 2

TeamConnect Ceiling 2 .........................................................2

Package contents ..............................................................3

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Product overview ..............................................................3

Connectors and controls........................................................4

Connecting the SL Ceiling Mic 2 .................................................4

Connecting to the network

(power supply and conﬁguration)............................................. 4

Outputting analog audio signals.............................................. 5

Outputting digital audio signals .............................................. 6

Planning the installation ........................................................7

Possible installation variants..................................................7

Adapting the installation height ...............................................7

Installing the SL Ceiling Mic 2 ...................................................8

Variant 1: installed ﬂush in a dropped/coffered ceiling........................... 8

Variant 2: mounted directly below the ceiling...................................10

Variant 3: suspended from the ceiling .........................................11

Mounting the SL Ceiling Mic 2 on a VESA mount................................13

Conﬁguring the TeamConnect Ceiling 2..........................................14

Downloading Sennheiser Control Cockpit......................................14

Conﬁguring the TeamConnect Ceiling 2 with the Sennheiser Control Cockpit .......14

Conﬁguring the TeamConnect Ceiling 2 with a media control system ..............15

Speciﬁcations ................................................................16

TeamConnect Ceiling 2 | 1

Important safety instructions

1. Read these safety instructions and the instruction manual of the product.

2. Keep these safety instructions and the instruction manual of the product. Always include all instructions when passing the product on to third parties.

3. Always include this instruction manual and the safety guide when passing the product on to third parties.

4. Only use attachments, accessories and spare parts speciﬁed by the manufacturer.

5. Do not attempt to open the product housing on your own. The warranty is voided for products opened by the customer.

6. Refer all servicing to qualiﬁed service personnel. Servicing is required when the product has been damaged in any way, liquid has been spilled or objects have fallen into the product, when the product has been exposed to rain or moisture, does not operate normally, or has been dropped.

7. Use the product only under the conditions of use listed in the speciﬁcations.

8. Do not operate the product if it was damaged during transportation.

9. Always run cables so that no one can trip over them.

10. Keep the product and its connections away from liquids and electrically conductive objects that are not necessary for operating the product.

11. Do not use any solvents or aggressive cleaning agents to clean the product.

12. Caution: Very high signal levels can damage your hearing and your loudspeakers. Reduce the volume on the connected audio devices before switching on the product; this will also help prevent acoustic feedback.

Intended use

The product is designed for indoor use, such as in conference rooms or presentation halls. The product can be used for commercial purposes. It is considered improper use when the product is used for any application not named in the corresponding instruction

manual. Sennheiser does not accept liability for damage arising from improper use or misuse of this product and its attachments/

accessories. Before putting the products into operation, please observe the respective country-speciﬁc regulations!

Safety instructions for installation

Observe the following safety instructions when installing the product.

The physical mounting and all electrical installations must be performed by a specialist. The specialist must have sufﬁcient professional training, experience and knowledge of applicable provisions,

regulations and standards to be able to properly assess the work assigned to them, identify possible hazards and take appropriate safety measures.

When mounting the product, observe and follow all local, national and international regulations and standards.

TeamConnect Ceiling 2

The TeamConnect Ceiling 2 consists of the SL Ceiling Mic 2 and the Sennheiser Control Cockpit conﬁguration software. This manual contains all the information you need to install and mount the ceiling microphone as well as instructions for conﬁguring the product using the Sennheiser Control Cockpit.

This instruction manual is available in other languages on the Sennheiser website: www.sennheiser.com/tcc2

2 | TeamConnect Ceiling 2

Package contents

M3x8 Torx10

• SL Ceiling Mic 2

• 3-pin Phoenix connector (3.81)

• 8 self-adhesive rubber feet

• Instruction manual

• Supplement sheet with manufacturer declarations

Accessories

Package contents

SL CM FB

Ceiling mounting frame

M4x8

M4x126.4 mm

Art. no. 506846

SL CM SK

Ceiling suspension set

M3x6

Art. no. 508291

Product overview

SL CM EB US

Angle brackets (for 2 ft ceiling grid)

Art. no. 508528

SL CM VB

VESA adapter

M6x16

Art. no. 508620

SL CM EB 625

Angle brackets (for 625 mm ceiling grid)

Art. no. 508290

Bottom Top

1 Status LEDs Multi-colored, can be conﬁgured with software 2 Microphone capsules 28 x KE 10-237 3 Connection sockets See next page

TeamConnect Ceiling 2 | 3

Connectors and controls

Primary ResetSecondary

4 5 6 7

Analog Out

+ -

Ethernet

PoE/Ctrl

4 Digital audio output Dante™ interface with two RJ-45 sockets, Primary and Secondary

• Supports redundancy and switched mode

5 Reset button To restore the factory settings

• Hold for 5 seconds

6 Analog audio output 3-pin socket

• Suitable for Phoenix Contact MCVW 1.5-3-ST-3.81

7 PoE/Ctrl socket RJ-45 socket

• PoE supply (Power over Ethernet)

• Conﬁguration via the software or a media control system

Connecting the SL Ceiling Mic 2

Connecting to the network (power supply and conﬁguration)

The Ethernet PoE/Ctrl RJ-45 socket is used to both power the SL Ceiling Mic 2 via Power over Ethernet and conﬁgure it using the Sennheiser Control Cockpit software (see „Conﬁguring the TeamConnect Ceiling 2“ on page 14).

In your network you can either use a switch that provides PoE or a PoE injector.

Use only shielded STP network cables that do not exceed an AWG value of 24.

SL Ceiling Mic 2

LAN

optional

Optional

PoE

LAN oder WiFi

LAN or WiFi

Control Cockpit Host PC

Control Cockpit host PC

(opt.Client)

(opt. client)

Media Control Client

Media control client

Media Control Server

Media control server

4 | TeamConnect Ceiling 2

optional

Optional

LAN or WiFi

LAN oder WiFi

Control Cockpit Clients

Control Cockpit clients

+ 12 hidden pages