Sennheiser SI1015-4000 SINGLE Datasheet
General Description
Sennheiser offers system packages that include all components necessary
to configure a complete system. Sennheiser’s Large-Area Infrared Systems provide
coverage of 4,000 sq. ft. up to 12,500 sq. ft. in both single and dual channel
modes. The SI1015 modulator and SZI1015 or SZI1029 emitters are the primary
components of the systems. The NT1015-120 will provide power for the SI1015
modulator and up to two SZI1015 or SZI1029 emitters. The SZA1060 terminating resistor (50 ohm), for the last emitter in a daisy chain, is included for system
designs that incorporate daisy chaining of emitters. The GA1031-CC rack adapter
allows for easy mounting of a SI1015 modulator to a 19" rack. The WM1 wall/
ceiling mount easily mounts the SZI1015 or SZI1029 emitter panels. The RI250
stethophone infrared receivers are for use with single channel systems operating at
2.3 MHz, and include the BA151 rechargeable battery. Alternatively, for dual channel
systems, the HDI302 stethophone infrared receiver is for use with systems
operating at 2.3/2.8 MHz, and also includes the BA151 rechargeable battery. The
BA151 rechargeable batteries can be conveniently recharged with the L151-10
charging unit(s) with the NT92-120 power supply. In addition, the NT2013-120
will power two to five L151-10 charging units.
Wireless | Systems
System Includes:
(1) SI1015—Two channel modulator
(1) NT1015-120—29 V DC power supply
(1) GA1031-CC—Rack adapter
(1) SZI1015—Emitter panel
(1) WM1—Wall/ceiling mount
(5) RI250—Single channel infrared stethophone receiver
(1) L151-10/NT—Charging unit with power supply
(1) NT92-120—AC adapter for L151-10 charging unit
SI1015-4000 Single System Package
* Illustrations do not show NT1015-120 power supply, GA1031-CC rack
adapter, NT92-120 adapter
74.000"
(1879.60 mm)
13.000"
(330.20 mm)
2 Pin Texas Connector
NT92–120 Power Supply
LED Indicator
Trickle Charge
(Green)
Button:
Press to begin
10 HR charge cycle
LED Indicator
Charge (Red)
Charging for
RI250, HDI302
Infrared Receivers
(Up to ten)
1.500"
(38.10 mm)
LED Indicators
Bright=Normal charge
Dim=Trickle charge
Charging for
BA151 Battery
(Up to ten)
5.450"
(138.43 mm)
SI1015
SZI1015
WM1
L151–10NT
RI250
SI1015–Rack mountable, half rack, two channel modulator. Operates at
2.3/2.8 MHz. NT1015-120 power supply required.
SI1015
Audio Input B
(XLR-3F)
Audio Input A
(XLR-3F)
DC Input Socket
(For NT1015-120)
RF Output 2
(BNC)
RF Output 1
(BNC)
Cable Grip
Strain Relief
RF Output
Termninal 1
DC Output
Termninal 1
DC Output
Termninal 2
RF Output
Termninal 2
Level Control A
Level Control B
Channel Selector Switch
IR Monitoring Diodes
49.817"
(1265.35 mm)
7.000"
(177.80 mm)
3.620"
(91.95 mm)
2.360"
(59.94 mm)
Power Supply
NT1015–120
9.040"
(229.62 mm)
6.660"
(169.16 mm)
10.350"
(262.89 mm)
9.680"
(245.87 mm)
ON/OFF
Switch
1.688"
(42.88 mm)
Power Cord
72.000"
(1828.80 mm)
SI1015-4000
Single
SZI1015-NT
SI1015-4000 Single System Package
49.817"
(1265.35 mm)
7.000"
(177.80 mm)
2.360"
(59.94 mm)
Power Supply
NT1015-120
Stripped Cable for
Connection to Barrier
Strip of SZI1015T
3.620"
(91.95 mm)
Convection Cooling Fins
3.318"
(84.28 mm)
10.270"
(260.86 mm)
IR Transmission Diodes
(behind cover)
4.970"
(126.24 mm)
DC Input Terminals
DC Output Terminals
RF Output Terminals
5/8" Thread for mounting
(3/8" X 1/2" adapters included)
72.000"
(1828.80 mm)
Power Cord
49.817"
(1265.35 mm)
7.000"
(177.80 mm)
2.360"
(59.94 mm)
Power Supply
NT1015-120
Stripped Cable for
Connection to Barrier
Strip of SZI1015T
3.620"
(91.95 mm)
72.000"
(1828.80 mm)
Power Cord
WM1–Wall/ceiling mount with 5/8" thread for mounting 2 or more
SI30 or SZI30.
WM1
Adjusting
Knob
Ratchet Adjustment
For Angle
5/8" External
Thread
4.571"
(116.10 mm)
ø1.936
(49.17 mm)
2.724"
(69.19 mm)
ø.161
(4.09 mm)
ø.743
(44.27 mm)
Mounting Plate
ø.1242
(31.55 mm)
RI250–Single channel infrared stethophone receiver for use with infrared
systems operating at 2.3 MHz. Includes one BA151 rechargeable battery.
(1.6 oz)
RI250
5.286"
(134.26 mm)
Replaceable
ear cushions
Two IR
Receiving Diodes
(behind plastic cover)
7.390"
(187.71 mm)
1.467"
(37.26 mm)
Inserted BA151
Rechargeable
Battery
ON/OFF
Volume
Control
ø.752
(19.10 mm)
L151-10/NT–Charging unit with power supply that charges either 10
BA151 rechargeable batteries or 10 RI250 infrared receivers
L151-10NT
74.000"
(1879.60 mm)
13.000"
(330.20 mm)
2 Pin Texas Connector
NT92–120 Power Supply
LED Indicator
Trickle Charge
(Green)
Button:
Press to begin
10 HR charge cycle
LED Indicator
Charge (Red)
Charging for
RI250, HDI302
Infrared Receivers
(Up to ten)
1.500"
(38.10 mm)
LED Indicators
Bright=Normal charge
Dim=Trickle charge
Charging for
BA151 Battery
(Up to ten)
5.450"
(138.43 mm)
ESZI1015-NT–Emitter panel for single, dual or multi channel use. Coverage: up to 4,000 sq. ft. in single channel mode. (3 lbs)
Loading...