Bedienungsanleitung
Instructions for use
Notice d‘emploi
Istruzioni per l‘uso
Instrucciones para el uso
Gebruiksaanwijzing
MZA 900 P
MZA 900 P
The MZA 900 P phantom power adaptor is used to
connect pre-polarized condenser microphones with a
or a
3.5 mm jack plug
inputs with 10 – 52 V phantom powering (P12 – P48).
onnected microphone is supplied via the adaptor.
The c
The possible combinations b
Sennheiser microphones are as follows:
MZA 900 P
3-pin special plug to microphone
etween the MZA 900 and
908 B
908 D
HSP 2 ew
HSP 4 ew
ME 2
ME 3
ME
MKE 2 ew gold
MKE 40 ew
4
MZA 900 P -4
HSP 2
HSP 4
HS 2
1
in conjunction with KA 100 S-4
²in conjunction with KA 100-4
ME 102
ME 104
ME 105²
1
MKE 2-4
MKE Platinum-4-C
²
The adaptor is also a quick and flexible solution if a
microphone is to be used for both wired and wireless
applications. One and the same microphone can be used
together with the MZA 900 P(-4) for wired applications
. in the studio) or with a bodypack transmitter (e.g.
(e.g
on stage).
The MZA 900 P can also be used as a cable tester for XLR
icrophone cables (see page 5).
m
1
Delivery includes
MZA 900 P with belt clip
Instructions for use
Warranty certificate
Connecting the microphone
Connect the jack plug of the
microphone to the socket of
e MZA 900 P. Lock the jack
th
ug by screwing down the
pl
coupling ring. This prevents
accidental loosening of the
connection and annoying
noise when the cable is
moved.
Output
The XLR output of the
MZA 900 P together with the back-electret condenser
micropho
in sound pressure in front of the microphone diaphragm
causes a positive voltage to appear at pin 2 and a negativ
voltage to
ba
Use a balanced XLR cable to connect the XLR output to
e phantom powered microphone input of the
th
subsequent device. If necessary, you can do without the
cable and connect the MZA 900 P directly to the XLR
input socke
2
ne delivers the correct signal phase (an increase
appear at pin 3). The output is electronically
lanced and floating.
t of the device.