Sennheiser MKH 30-P48 User Manual
...
Sennheiser User Manual
Specifications and Main Features
- It is a high-frequency condenser microphone which operates with a model MKH 30 P 48
- It’s directional characteristic is known to be bilateral (figure-eight)
- It has a very low noise level which facilitates high-dynamic recordings, therefore the input is very low
- The SMAX of the sound pressure level is 142 dB which ensures no distortion in transmitting signals
- Operating frequency goes from 40 to a maximum of 20,000 Hz
- It has a electronically balanced output with no transformer.
- It contains a switchable -10 dB pre-attenuator
- A roll off filter which can be switched off due to incompetence is also available
- As per DIN 45 596, the phantom supply voltage required is between 44 and 52 V
- The nominal impedance is set at 150 Ω and the minimum terminating resistance is built at 1000 Ω
- The dimensions are known to be 25mm by 150 mm
- Weight of the product is roughly 110g
- The microphone comes with accessories which include
- MZW 41 wind shield,
- One MZQ 31 stand adapter,
- and a MKH 30 P 48 microphone.
Frequently Asked Questions
- What is the MKH 30 P 48
- is defined as a high-frequency microphone with a figure-eight shape. it is recommended for recording purposes.
- Are there any requirements in regards to the power supply for MKH 30 P 48.
- Yes, it requires a standard DIN 45 596 with voltage between 44 and 52.
- Does the microphone work well in high sound pressure levels?
- Yes, sound pressure levels up to 142dB can be managed without distortion.
- Are MHS20 microphones able to perform stereo recordings?
- Yes, they can be effectively used for mid-side (MS) stereo recording when combined with appropriate microphones.
- What is the purpose of the pre-attenuation switch?
- To minimize distortion associated with extremely loud sounds, the pre-attenuation switch lowers the microphone sensitivity by 10 dB.
- What is the roll-off filter designed for?
- The roll-off filter assists in reducing low-end shocks due to GPS proximity between the microphone and the instrument during performance.
- What accessories come with the MKH 30 P 48?
- Packet provides MKH 30 P 48 Microphone, MZQ 31 stand adapter, and MZW 41 wind shield.
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Page 11
Page 12
Page 13
Page 14
Page 15
Page 16
Page 17
Page 18
Page 19
Page 20
Page 21
Page 22
Page 23
Page 24
Page 25
Page 26
Page 27
Page 28
Page 29
Page 30
Page 31
Page 32
Page 33
Page 34
Page 35
Page 36
Page 37
Page 38
Page 39
Page 40
Page 41
Page 42
Page 43
Page 44
Page 45
Page 46
Page 47
Page 48
Page 49
Page 50
Page 51
Page 52
Loading...