Sennheiser MKE 1-4, MKE 1-4-1, MKE 1-4-2, MKE 1-4-3, MKE 1-5 Specification

...
Page 1
Smallest
Our
Sound Pro
MKE 1 System
Page 2
One system, all possibilities.
Whether used in musicals, live shows or broadcasting: MKE 1, Sennheiser's smallest clip-on microphone, delivers its greatest performance exactly where a microphone must be invisible – and still offers great sound without making any compromises. With a comprehensive range of accessories and differing versions, the MKE 1 is your reliable and unfailing sound pro.
Reliability as a principle:
Shielded from sweat by a new protective membrane, the MKE 1 lasts longer than other clip-on microphones, especially under the tough conditions of live performance. Its special gauze and an additional protective cap protect it from most moisture. So, it only picks up what it is meant to: perfect sound. The MKE 1 is extremely robust. The Kevlar™-reinforced cable with integrated anti-kink device reduces handling noise and makes the MKE 1 a microphone you can rely on.
Wide range of accessories:
An intelligent accessories concept ensures that the MKE 1 will meet all challenges arising in live and broadcasting operation. In order to suit the location and purpose, you can choose from four colors (black, beige, white and brown). Various clip-on modules let you attach the MKE 1 to your body or clothes so that it is virtually invisible, as well as protected against handling noise and infrasound.
Page 3
MKE 1 Great strengths – small microphone.
The various color and cable versions make the MKE 1 the most flexible clip-on microphone for all types of appli­cations. With its full and natural sound, the smallest Sennheiser clip-on microphone is the new standard for live shows and broadcasting.
u
Extremely small size (3.3 mm capsule diameter)
u
Very high passive maximum sound pressure levels (142 dB)
u
Excellent speech intelligibility; clear, pleasant treble
u
Full, natural sound with low room ambience
u
Thin (1 mm diameter) and robust cable, extremely flexible with minimum handling noise
u
Very resistant to perspiration due to protective membrane
The MKE 1 is compatible with all Sennheiser Wireless Systems.
Delivery includes
1 MKE 1 clip-on microphone 1 MZC 1-1 small frequency response cap 1 MZC 1-2 multi-purpose cap 3 make-up protection caps
Recommended Accessories
LAV Tape for invisible body attachment
MZ 1 Small box – everything inside.
The accessories set for the MKE 1 offers what is likely the most com­prehensive assortment of clip-on microphone system components for extremely varied applications. In addition to a pin mount, a magnetic holder and a flexible microphone clip, it includes windshields in a number of colors, as well as a cover-up for invisible attachment. What's more, you can also stow your MKE 1 (not included in the MZ 1 scope of delivery) securely in the box.
Delivery includes
2 mini clips MZQ 1 (black, white) 2 mini clamps MZQ 10 (black, white) 2 magnetic mounts MZM 1 (black, white) 1 cover-up (transparent) 4 foam windshields MZW 02 (black, white, brown, beige) 2 windshield baskets MZW 01 (black, beige) 2 pin mounts ZH 1 (black, white)
Page 4
538310 09/09 Pr inted in Germany Sennheiser is a trademark of Sennheiser electronic GmbH & Co. KG. www.se nnheis er.c om
Sennheiser electronic GmbH & Co. KG
Am Labor 1, 30900 Wedemark, Germany www.sennheiser.com
MKE 1 Technical data
Pick-up pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . omni-directional
Frequency response . . . . . . . . . . . . . . . . . . . . . . .20–20,000 Hz ± 2.5 dB
Sensitivity (1 kHz) .........................5 mV/Pa ± 2.5 dB
Nominal impedance ........................1,000 O
Equivalent noise level A-weighted ...........27 dB
CCIR-weighted ............................. 39 dB
Cable length (-4/-5) ........................1.6 m / 4 m
Connector (-4/-5) ..........................3-pin special connector / unterminated cable
Diameter of microphone head . . . . . . . . . . . . . .3.3 mm
Weight (w/o) connector and cable) . . . . . . . . . .0.1 g
Suitable transmitters . . . . . . . . . . . . . . . . . . . . . .SK 5212, SK 5012, SK 250, SK 50, SK 3063,
evolution wireless transmitters
Variants
MKE 1-4 with 3-pin special connector, black MKE 1-4-1 with 3-pin special connector, white MKE 1-4-2 with 3-pin special connector, brown MKE 1-4-3 with 3-pin special connector, beige
MKE 1-5 with open cable ends, black MKE 1-5-1 with open cable ends, white MKE 1-5-2 with open cable ends, brown MKE 1-5-3 with open cable ends, beige
MKE 1-EW with straight jack plug for evolution wireless transmitters, black MKE 1-EW-1 with straight jack plug for evolution wireless transmitters, white MKE 1-EW-2 with straight jack plug for evolution wireless transmitters, brown MKE 1-EW-3 with straight jack plug for evolution wireless transmitters, beige
Loading...