Sennheiser I 30 H-C, ME 36 W, ME 36, ME 34 W, ME 35 Users Manual
...
ME 34, ME 35, ME 36
Instruction manual
Important safety instructions
Important safety instructions
1. Read these safety instructions and the instruction manual of the
product.
2. Keep these safety instructions and the instruction manual of the
product. Always include all instructions when passing the product
on to third parties.
3. Always include this instruction manual and the safety guide when
passing the product on to third parties.
4. Only use attachments, accessories and spare parts specified by
the manufacturer.
5. Do not attempt to open the product housing on your own. The
warranty is voided for products opened by the customer.
6. Refer all servicing to qualified service personnel. Servicing is
required when the product has been damaged in any way, liquid
has been spilled or objects have fallen into the product, when the
product has been exposed to rain or moisture, does not operate
normally, or has been dropped.
7. Use the product only under the conditions of use listed in the
specifications.
8. Do not operate the product if it was damaged during transportation.
9. Always run cables so that no one can trip over them.
10. Keep the product and its connections away from liquids and electrically conductive objects that are not necessary for operating the
product.
11. Do not use any solvents or aggressive cleaning agents to clean the
product.
12. Caution: Very high signal levels can damage your hearing and
your loudspeakers. Reduce the volume on the connected audio
devices before switching on the product; this will also help prevent
acoustic feedback.
Intended use
The product is designed for indoor use.
The product can be used for commercial purposes.
It is considered improper use when the product is used for any applica-
tion not named in the corresponding instruction manual.
Sennheiser does not accept liability for damage arising from improper
use or misuse of this product and its attachments/accessories.
2
| ME 34, ME 35, ME 36
ME 34, ME 35, ME 36 microphone heads
ME 34
ME 35
Before putting the products into operation, please observe the respective country-specific regulations!
ME 34, ME 35, ME 36 microphone
heads
The ME 34, ME 35 and ME 36 are pre-polarized condenser microphone
heads for use with the Sennheiser MZH goosenecks. The microphone
heads are designed for conference, public address and studio applications.
Features of the ME 34 and ME 35
• ME 34: cardioid pick-up pattern
• ME 35: super-cardioid pick-up pattern
• Rugged metal housing with non-reflective coating
• High sound quality
• Low equivalent noise level
Features of the ME 36
• Super-cardioid/lobar pick-up pattern
• Rugged metall housing with non-reflective coating
• Excellent directivity
• Superior sound quality
• Very low equivalent noise level
Connection possibilities
To create an intact bond, make sure that you screw the microphone
tightly onto the gooseneck.
ME 36
MZH 30xx
ME 34, ME 35, ME 36 | 3
Loading...