Sennheiser MD 431 Datasheet

MD 431 II

Microphones | Dynamic Microphone

General Description

By virtue of its design and features, the MD 431 II ranks amongst Sennheiser’s most exceptional microphones and is suitable for vocal, speech and broadcasting applications. Colour: black.

Cat. No. 001605

Technical Data

Pick-up pattern ...........................................................super-cardioid

Frequency response .................................................40 – 16,000 Hz

Sensitivity (free field, no load, 1 kHz)................. 2 mV/Pa ± 3 dB

Nominal impedance ................................................................. 250 Ω

Min. terminating impedance..................................................... 1 kΩ

Dimensions ................................... Ø 49 x 200 mm, body Ø 31 mm

Weight ...........................................................................approx. 250 g

Cable pictured is an acces sory not supp lied with the mi crophone

Features

Exceptionally good feedback rejection

Shock mounted capsule provides very good rejection of handling noise

Hum compensating coil

Integral pop filter

On/off switch (reed switch) can be locked in the ‘ON’ position if required

Delivery includes: 1 MD 431 II

1 MZA 4031 quick release clamp

Recommended Accessories

MZT 100 table stand Cat. No. 001883

MZT 441 table stand Cat. No. 000799

MZT 14 mounting bolt Cat. No. 001895

MZW 4032 foam windshield Cat. No. 002978

MZW 416-1 foam windshield Cat. No. 001536

Profile

Super-cardioid stage microphone, hum compensating coil, integral popshield, reed on/off switch, frequency response 40 – 16,000 Hz, sensitivity (free field, no load) 2 mV/Pa ± 3 dB at 1 kHz, nominal impedance 250 Ω, min. terminating impedance 1 kΩ , dimensions Ø 49 x 200 mm, body Ø 31 mm, weight approx. 250 g.