Page 1
Bedienungsanleitung
Instructions for use
Notice d‘emploi
Istruzioni per l‘uso
Instrucciones de uso
Gebruiksaanwijzing
HSP 2
HSP 4
Page 2
Contents
Safety instructions ................................................................................. 2
Delivery includes..................................................................................... 3
HSP 2/HSP 4............................................................................................. 4
Putting the HSP 2 into operation ........................................................5
Attaching the microphone to the left or right side .................. 5
Adjusting the microphone boom and the neckband ............... 7
Windshields for the HSP 2 ............................................................. 9
Treble boost using the frequency response caps ...................10
HSP 2 cable variants .....................................................................11
Putting the HSP 4 into operation ......................................................12
Attaching the microphone to the left or right side ................12
Adjusting the microphone boom and the neckband .............14
Attaching the sound inlet basket ..............................................15
Attaching the cable to the cable grip ........................................16
HSP 4 cable variants .....................................................................17
Care and maintenance .........................................................................18
Accessories/spare parts ......................................................................21
Specifications.........................................................................................23
Specifications HSP 2/HSP 2-M ....................................................23
Specifications HSP 4/HSP 4-M ....................................................25
Manufacturer Declarations .................................................................27
Thank you for choosing Sennheiser!
We have designed this product to give you reliable operation over
many years. Over 60 years of accumulated expertise in the design
and manufacture of high-quality electro-acoustic equipment
have made Sennheiser a world-leading company in this field.
Please take a few moments to read these instructions carefully, as
we want you to enjoy your new Sennheiser products quickly and
to the fullest.
1
Page 3
Safety instructions
• Please read these instructions carefully and completely before
using the device.
• Make these instructions easily accessible to all users at all
times.
• Always include these instructions when passing the device on
to third parties.
• Water entering the housing of the device can cause a shortcircuit and damage the electronics. Protect the device from
wetness. Use only a slightly damp cloth to clean the device.
• Do not expose the device to extreme temperatures (normal
operating temperatures: 10 °C to 35 °C).
• Use the device with care and store it in a clean, dust-free
environment.
Intended use of the device
Intended use includes:
• having read these instructions, especially the chapter “Safety
instructions”,
• using the device within the operating conditions and
limitations described in this instruction manual.
• never opening the device. If devices are opened by customers
in breach of this instruction, the warranty becomes null and
void.
“Improper use” means using the device other than as described in
these instructions, or under operating conditions which differ
from those described herein.
2
Page 4
Delivery includes
Delivery of the HSP 2/HSP 4 includes:
1 boom microphone
1 neckband
5 clips
1 silicone tube
1 connection cable
1 plastic transport case, foam-lined with cut-outs
1 windshield (HSP 4 only)
2 caps, short and long (HSP 2 only)
1 instruction manual
1 Warranty Certificate
3
Page 5
HSP 2/HSP 4
HSP 2 and HSP 4 are high-quality condenser headmics designed
for professional “hands free” applications. Their adjustable
neckband is visually unobtrusive and very comfortable to wear.
The 24 available HSP variants differ in size, color and connector
(see “HSP 2 cable variants” on page 11 and “HSP 4 cable variants”
on page 17).
There are two pick-up patterns available:
• HSP 2: omni-directional
• HSP 4: cardioid
Features
• Individually adjustable to all head sizes
• Neckband design keeps the microphone clear from shirt-collar
or clothing
• Thin microphone boom, interchangeable
• Microphone boom can be attached to the left or right side
(clip)
• Adjustable neckband for optimum adaption of the angle
• Microphone boom is adjustable in length
• All metal parts of the neckband and the microphone boom are
coated in a physical vapour deposition process (scratchresistant)
• Modular overall system, i.e. all system components are easily
interchangeable
4
Page 6
Putting the HSP 2 into operation
The HSP 2 is ready for operation on delivery. The microphone can
be worn on the left or right side of the mouth. If you do not want
to change sides, continue on page 7.
Attaching the microphone to the left or right side
The neckband has as a clip which is designed so that
the microphone boom can be worn on either side of
the mouth.
CAUTION! Damage to the microphone boom!
The microphone boom can break or be impaired in
its function when you bend or turn it in the wrong
place.
왘 Only adjust the microphone boom as described in
this chapter.
To remove the microphone boom:
왘 Open the clip on the neckband.
왘 Carefully remove the microphone boom and the neckband from
the clip.
5
Page 7
To reattach the microphone boom:
R
L
왘 First press the microphone boom and then the neckband
into the clip as shown.
왘 Close the clip.
6
Page 8
Adjusting the microphone boom and the neckband
2–3 cm
For best possible comfort and optimum fit of the headmic, the
neckband and the microphone boom have to be adjusted to
properly fit your head.
CAUTION! Damage to the microphone boom!
The microphone boom can break or be impaired in
its function when you bend or turn it in the wrong
place.
왘 For adjusting the microphone boom, ONLY bend
or turn the neckband.
Positioning the microphone towards the corner of the mouth
To individually position the microphone:
왘 Bend the neckband at the
clip to adjust the angle of the
microphone boom .
왘 Push the microphone boom
backwards or forwards in the
clip so that the microphone is
positioned at the corner of the
mouth as shown.
7
Page 9
Adjusting the neckband
The neckband is flexible and ensures an optimum fit.
왘 Change the length of the
neckband until a snug but
comfortable fit is achieved.
왘 If necessary, adjust the neck-
band at the earhooks.
Attaching the cable to the cable
grip
왘 Attach the microphone cable
to the cable grip in the centre
of the neckband.
Note:
When attaching the thin
cable, make sure you also
press the small cable sleeve
into the cable grip or the
cable will fall out.
8
Page 10
Windshields for the HSP 2
쐋
The quality of outdoor recordings
and close miking can be impaired
by wind noise. An effective
attenuation of wind noise can be
obtained by using the MZW 2 and
the MZW 02 windshields.
To begin with, use the MZW 2
windshield which reduces wind
noise by a maximum of 20 dB.
With the additional MZW 02 foam
windshield you can reduce wind
noise by a further 10 dB.
The MZW 2 and MZW 02 are
available as accessories.
9
Page 11
Treble boost using the frequency response caps
Your HSP 2 headmic is supplied with two different frequency
response caps. These caps allow you to adjust the microphone’s
sensitivity in the presence area (see “Frequency response curve
HSP 2” on page 24):
• Short cap: MZC 2-1 (treble boost of 2 dB)
• Long cap: MZC 2-2 (treble boost of 4 dB)
Use these caps if the microphone cannot be positioned close to the
mouth. The further away the microphone is from the mouth, the
less treble is picked up. In addition, you should use these caps if
the sound is too muffled or if you want to increase the speech
intelligibility.
왘 Slip the cap of your choice onto the microphone until it engages
with the second notch.
10
Page 12
HSP 2 cable variants
The headmics are available in two sizes. The -M variants have
smaller neckbands and shorter microphone booms.
Connection cable with 3-pin lockable special connector
Suitable for Sennheiser SK 50, SK 250, SK 5012 and SK 3063
bodypack transmitters.
HSP 2 anthracite Cat. No. 009862
HSP 2-3 beige Cat. No. 009863
HSP 2-M anthracite Cat. No. 500694
HSP 2-3-M beige Cat. No. 500690
Steel wire cable with 3.5 mm mini-jack
Suitable for SK 100, SK 300 and SK 500 evolution wireless series
bodypack transmitters. For wired applications, the headmic can be
used with the intelligent MZA 900 P phantom power adapter.
HSP 2-ew anthracite Cat. No. 009866
HSP 2-ew-3 beige Cat. No. 009872
HSP 2-ew-M anthracite Cat. No. 500693
HSP 2-ew-3-M beige Cat. No. 500692
Steel wire cable with open ends
HSP 2-5 anthracite Cat. No. 009868
HSP 2-5-3 beige Cat. No. 009869
HSP 2-5-M anthracite Cat. No. 500691
HSP 2-3-5-M beige Cat. No. 500689
11
Page 13
Putting the HSP 4 into operation
The HSP 4 is ready for operation on delivery. The microphone can
be worn on the left or right side of the mouth. If you do not want
to change sides, continue on page 14.
Attaching the microphone to the left or right side
The neckband has as a clip which is designed so that
the microphone boom can be worn on either side of
the mouth.
CAUTION! Damage to the microphone boom!
The microphone boom can break or be impaired in
its function when you bend or turn it.
왘 Only adjust the microphone boom as described in
this chapter.
To remove the microphone boom:
왘 Open the clip on the neckband.
왘 Carefully remove the microphone boom and the neckband from
the clip.
12
Page 14
To reattach the microphone boom:
R
L
왘 First press the microphone boom and then the neckband
into the clip as shown.
왘 Close the clip.
13
Page 15
Adjusting the microphone boom and the neckband
쐋
For best possible comfort and optimum fit of the headmic, the
neckband and the microphone boom have to be adjusted to
properly fit your head.
CAUTION! Damage to the microphone boom!
The microphone boom can break or be impaired in
its function when you bend or turn it.
왘 For adjusting the microphone boom, ONLY bend
or turn the neckband or the flexible gooseneck at
the forward part of the microphone boom.
Positioning the microphone towards the corner of the mouth
To individually position the microphone:
왘 Bend the neckband at the clip
to adjust the angle of the
microphone boom .
왘 Push the microphone boom
backwards or forwards in the
clip so that the microphone is
positioned directly at the corner
of the mouth as shown.
왘 If necessary, precisely position
the microphone by using the
flexible gooseneck .
14
Page 16
Attaching the sound inlet basket
Notes:
– Do not position the microphone directly in front of your
mouth as it will pick up your breathing and plosive noises
from your mouth. In addition, moisture can adversely affect
the sound and performance of your microphone.
– When attaching the sound
inlet basket, make sure that
it locks into place with an
audible click.
– Make sure not to cover the
sound inlet.
Adjusting the neckband
The neckband is flexible and ensures an optimum fit.
왘 Change the length of the
neckband until a snug but
comfortable fit is achieved.
왘 If necessary, adjust the neck-
band at the earhooks.
15
Page 17
Attaching the cable to the cable grip
왘 Attach the microphone cable to
the cable grip in the centre of the
neckband.
Note:
When attaching the thin cable,
make sure you also press the
small cable sleeve into the cable
grip or the cable will fall out.
16
Page 18
HSP 4 cable variants
The headmics are available in two sizes. The -M variants have
smaller neckbands and shorter microphone booms.
Connection cable with 3-pin lockable special connector
Suitable for Sennheiser SK 50, SK 250, SK 5012 and SK 3063
bodypack transmitters.
HSP 4 anthracite Cat. No. 009864
HSP 4-3 beige Cat. No. 009865
HSP 4-M anthracite Cat. No. 500700
HSP 4-3-M beige Cat. No. 500696
Steel wire cable with 3.5 mm mini-jack
Suitable for SK 100, SK 300 and SK 500 evolution wireless series
bodypack transmitters. For wired applications, the headmic can be
used with the intelligent MZA 900 P phantom power adapter.
HSP 4-ew anthracite Cat. No. 009867
HSP 4-ew-3 beige Cat. No. 009873
HSP 4-ew-M anthracite Cat. No. 500699
HSP 4-ew-3-M beige Cat. No. 500698
Steel wire cable with open ends
HSP 4-5 anthracite Cat. No. 009870
HSP 4-5-3 beige Cat. No. 009871
HSP 4-5-M anthracite Cat. No. 500697
HSP 4-3-5-M beige Cat. No. 500695
17
Page 19
Care and maintenance
CAUTION! Liquids can damage the electronics of the device!
Liquids entering the housing of the device can cause
a short-circuit and damage the electronics.
왘 Only use a soft, slightly damp cloth to clean the
device.
Cleaning the sound inlet basket (HSP 4 only)
왘 To clean or replace the sound inlet basket, carefully pull it from
the capsule.
왘 Moisten a small brush (bristle brush or toothbrush) with
isopropyl alcohol.
왘 Carefully brush off the sound
inlet basket.
왘 Allow the sound inlet basket to
air dry for approx. 1 hour so
that the remaining isopropyl
alcohol can evaporate.
왘 Reattach the sound inlet basket
to the capsule so that it locks
into place with an audible click.
When attaching the sound inlet
basket, make sure not to cover
the sound inlet.
18
Page 20
Cleaning the contacts of the connection cable
Over time, salt deposits from sweat can build up on the connector
and the socket. Clean the connector and the socket using standard
isopropyl alcohol.
To loosen the connection:
왘 Slide the silicone tube aside.
왘 Insert your fingernail into the
join.
왘 Pull the connector and the socket
apart as shown.
왘 Moisten a small brush (bristle
brush or toothbrush) with
isopropyl alcohol.
왘 Carefully brush off the connector
and the socket and remove the
salt deposits.
왘 Rinse the connector and the
socket with isopropyl alcohol to
remove the remaining salt
deposits.
19
Page 21
왘 Dry the connector and the socket using a soft cloth or a small
piece of cotton wool and carefully tap them off.
왘 Allow the connector and the socket to air dry for approx. 1 hour
so that the remaining isopropyl alcohol can evaporate.
왘 Slide the silicone tube onto the connector.
왘 Connect the connector to the socket.
20
Page 22
Accessories/spare parts
The following accessories and/or spare parts are available for the
HSP 2 / HSP 4:
Spare parts for HSP 2
Parts Cat. No.
Boom microphone, omni-directional, beige 511711
Boom microphone, omni-directional, anthracite 511712
HSP-M boom microphone, omni-directional, anthracite 515280
HSP-M boom microphone, omni-directional, beige 515281
MZC 2-1 cap, short, anthracite 085842
MZC 2-2 cap, long, anthracite 085839
MZC 2-1 cap, short, beige 085843
MZC 2-2 cap, long, beige 085840
MZ 2 make-up protector 004743
MZW 2 windshield, black 047185
MZW 2 windshield, beige 047186
MZW 02 foam windshield, anthracite 076615
Set of clips for HSP 2, beige 528165
Set of clips for HSP 2, black 528166
Spare parts for HSP 4
Parts Cat. No.
Boom microphone, cardioid, beige 511713
Boom microphone, cardioid, anthracite 511714
21
Page 23
HSP-M boom microphone, cardioid, anthracite 515282
HSP-M boom microphone, cardioid, beige 515283
Windshield cap, cardioid, anthracite 511715
Windshield cap, cardioid, beige 511716
MZW 4 foam windshield, black 510862
MZW 4 foam windshield, beige 510863
Set of clips for HSP 4, beige 528167
Set of clips for HSP 4, black 528168
Spare parts for HSP 2 and HSP 4
Parts Cat. No.
Neckband, anthracite 511709
Neckband, beige 511710
HSP-M neckband, anthracite 515278
HSP-M neckband, beige 515279
Cable with 3-pin lockable special connector, black 511717
Cable with 3-pin lockable special connector, beige 511718
Steel wire cable with 3.5 mm mini-jack, black 511719
Steel wire cable with 3.5 mm mini-jack, beige 511720
Steel wire cable with open ends, black 511721
Steel wire cable with open ends, beige 511722
Plastic transport case 511723
MZA 900 P phantom power adapter 500226
22
Page 24
Specifications
Specifications HSP 2/HSP 2-M
Frequency response 20−20,000 Hz ±3 dB
Pick-up pattern omni-directional
Nominal impedance
(at 1 kHz)
Min. terminating impedance 4.7 kΩ
Sensitivity 2 mV/Pa ± 3 dB
Diameter of mic capsule 4.8 mm
Max. sound pressure level 150 dB
Equivalent noise level 28 dB (A)
Supply current approx. 250 μA
Power supply 4.5 − 15 V
Operating temperature –10 °C to +50 °C
Cable length 1.6 m
Diameter of boom arm 1.1 mm
Weight HSP 2/HSP 2-M 2.1 g/2.0 g
Connector see “HSP 2 cable variants” on
1 kΩ
page 11
Neckband
Width HSP 2/HSP 2-M 110 mm/80 mm
Weight HSP 2/HSP 2-M 4.4 g/4.0 g
23
Page 25
Polar diagram HSP 2
0°
5
10
15
20
25
dB
30°
60°
90°
30°
60°
90°
120°
150°
180°
150°
120°
2000 Hz
4000 Hz
8000 Hz
16000 Hz
125 Hz
250 Hz
500 Hz
1000 Hz
0
- 50
- 55
- 60
- 65
- 70
20
50
100
200
500
1000
2000
5000
10000
20000
Hz
- 45
- 40
- 35
dBv
without cap
with MZC 2-1 cap, short
with MZC 2-2 cap, long
Frequency response curve HSP 2
24
Page 26
Specifications HSP 4/HSP 4-M
Frequency response 40−20,000 Hz ±3 dB
Pick-up pattern cardioid
Nominal impedance
(at 1 kHz)
Min. terminating impedance 4.7 kΩ
Sensitivity 4 mV/Pa ±3 dB
Diameter of mic capsule 8.4 mm
Max. sound pressure level 150 dB
Equivalent noise level 37 dB (A)
Supply current approx. 250 μA
Power supply 4.5
Operating temperature –10 °C to +50 °C
Cable length 1.6 m
Diameter of boom arm 2.0 mm
Weight HSP 4/HSP 4-M 4.8 g/4.0 g
Connector see “HSP 4 cable variants” on
Neckband
Width HSP 4/HSP 4-M 110 mm/80 mm
Weight HSP 4/HSP 4-M 4.4 g/4.0 g
1 kΩ
−
15 V
page 17
25
Page 27
Polar diagram HSP 4
0°
5
10
15
20
25
dB
30°
60°
90°
30°
60°
90°
120°
150°
180°
150°
120°
2000 Hz
4000 Hz
8000 Hz
16000 Hz
125 Hz
250 Hz
500 Hz
1000 Hz
0
20
50
100
200
500
1000 2000
5000
10000
20000
Hz
dBv
0°, 1 m 90°, 1 m
- 50
- 55
- 60
- 65
- 70
- 45
- 40
- 35
0°, 1 cm
Frequency response curve HSP 4
26
Page 28
Manufacturer Declarations
Warranty
2 years
CE Declaration of Conformity
This equipment is in compliance with the essential requirements
and other relevant provisions of Directive 2004/108/EC. The
declaration is available on the Internet at www.sennheiser.com.
WEEE Declaration
Please dispose of this product at the end of its
operational lifetime by taking it to your local collection
point or recycling center for such equipment.
27
Page 29
Sennheiser electronic GmbH & Co. KG
Am Labor 1, 30900 Wedemark, Germany
Phone +49 (5130) 600 0 Printed in Germany
Fax +49 (5130) 600 300 Publ. 01/08
www.sennheiser.com 527045/A01
Loading...