Sennheiser HSP 2 User Manual 2
Instructions for use
HSP 2
HSP 4
Contents
HSP 2/HSP 4 .................................................................................. 2
Features.......................................................................................... 2
Delivery includes........................................................................... 3
Attaching the microphone boom .............................................. 3
Adjusting the neckband.............................................................. 4
Cable holder................................................................................... 4
Changing the microphone .......................................................... 5
Positioning the microphone capsule (HSP 2) ........................ 6
Positioning the microphone capsule (HSP 4) ......................... 7
Cleaning the pop protection (HSP 4 only)............................... 7
Accessories .................................................................................... 8
Overview of product variants .................................................. 10
Specifications .............................................................................. 11
Manufacturer declarations ....................................................... 15
1
HSP 2/HSP 4
High-quality back-electret condenser headmics, designed for
professional “hands free” applications. The adjustable
neckband is visually unobtrusive and very comfortable to
wear.
The 12 available HSP variants differ in pick-up pattern,
colour and connector.
There are two pick-up patterns available:
HSP 2: omni-directional
HSP 4: cardioid
Features
y
Individually adjustable to all head sizes
y
Neckband design keeps the microphone clear from shirtcollar or clothing
y
Thin microphone boom, interchangeable
y
Microphone boom can be attached to the left or right side
y
Angle of microphone boom can be adjusted in three steps
y
Microphone boom is adjustable in length
y
Connection cable can easily be interchanged
y
All metal parts are coated in a physical vapour deposition
process (scratch-resistant)
2
Delivery includes
y
Boom microphone
y Neckband
y
Neckband connecting cable
y
Plastic transport case, foam-lined with cut-outs
y
Instructions for use
y
Warranty Certificate
Attaching the microphone boom
The neckband has two holders which are designed so that the
microphone booms can be worn on either side of the mouth.
To change the microphone
boom, carefully lever it out of
the holder.
microphone boom, press it into
the holder until it snaps in. The
upper round recess is for the
HSP
2 (∅ 1.1 mm). The lower square recess at the front keeps
the HSP
the sound inlet is reliably directed towards the mouth.
To benefit for a long time from the reliable and firm guidance
through the holder you should not turn the microphone boom
in the recess. Always carefully lever it out of the holder and
then let it snap in again.
Note:
In order to ensure the adjustability of the angle of the
microphone boom, maintain a minimum distance of 1
cm between the holder and the cable connection.
To reattach the
4 in a fixed, non-rotating position, thus ensuring that
– 2
3
The cushion delivered with your
HSP
2/HSP 4 improves the wearing comfort. If desired, attach
the cushion to your microfone
boom fastener.
Adjusting the neckband
You can adjust the neckband to
fit all head sizes. To do so,
change the length of the
neckband by pushing in or
pulling out the ear bows.
Cable holder
Attach the microphone cable to
the holder in the centre of the
neckband.
Note:
When attaching the thin
cable, make sure you also
press the small cable sleeve
into the holder or the cable
will fall out.
4
Changing the microphone
The connection between the
microphone boom and the
microphone cable ist very tight.
To loosen this connection, in
sert your fingernail into the join
and then pull the connector and
the socket apart as shown.
Note:
When pulling apart, make sure you hold the thick end of
the connector and the socket (NOT the cable).
Pulling the thin microphone boom or the cable sleeve can damage the microphone boom or cable. This will invalidate the
Sennheiser warranty.
-
5
Loading...