Sennheiser HME 26 (4),HME 26-4,HME 26-6004,HME 26 (4) Specification Sheet
HME 26 (4)
FOR CLEAR SPEECH TRANSMISSION
CONDENSER
MICROPHONE
PROFESSIONAL HEADPHONE WITH
The lightweight headsets in the HME 26 series, with
their closed supra-aural design, have been developed
for use in radio and television applications.
The headphones are dimensioned for particularly high
sound pressure levels. The headsets are exceptionally
comfortable to wear while providing a high degree of
noise attenuation. With all versions in this series, ActiveGard protects the user from extreme volume peaks.
The condenser microphone with a cardiod pick-up
pattern features excellent acoustic performance, with
linear frequency response over a broad frequency
range up to 20 kHz. Another important feature is
its high feedback rejection. The gooseneck microphone
boom can be used on either the left or right side.
Both allow users to make exact adjustments to their
individual requirements.
Lightweight
Extremely comfortable to wear due to the
two-piece padded headband and soft earpads
Single-sided cable
Headphones allow for high sound pressure levels
ActiveGard™ (can be switched off)
Volume peaks above
105 dB are eliminated
“Flip-away” headphone
allows single-sided listening
Pre-polarized condenser microphone
(cardioid character) with linear frequency response
Flexible microphone boom can be worn
on the left or right-hand side
Microphone mutes by positioning
the microphone boom vertically
Cable, microphone boom and earpads
can be replaced easily
2 year warranty
5
10
15
20
25
dB
0
30°
60°
90°
150°
120°
0°
30°
60°
90°
120°
150°
180°
125 Hz
250 Hz
500 Hz
1 kHz
2 kHz
4 kHz
8 kHz
16 kHz
Hz
20
+10
+5
+15
-15
0
-5
-10
50 100 200 500 1K 2K 5K 10K
20K
d
B
r
0
-5
+5
+10
+15
-10
-15
-20
-25
40 50 100 200 500 1K 2K 5K 10K
20K
d
B
r
Hz
Mikrophone polar diagram
high frequencieslow frequencies
Headphones frequenc y response
Microphone frequenc y response
Far field Near fie ld
Technical Data
Headphones HME 26-100 (4) HME 26-600 (4)
Transducer principle
dynamic, closed dynamic, closed
Ear coupling
supra-aural supra-aural
Frequency response
20 – 18,000 Hz 20 – 18,000 Hz
Impedance
50 O mono/100 O stereo 300 O mono/600 O stereo
THD
< 0,5 % at 1 kHz < 0,5 % at 1 kHz
Nominal SPL
105 dB SPL at 1 kHz, 1 mW
115 dB SPL at 1 kHz, 1 V
(ActiveGard™ switched off)
105 dB SPL at 1 kHz, 1 mW
107 dB SPL at 1 kHz, 1 V
(ActiveGard™ switched off)
Max. SPL
105 dB SPL at 1 kHz
128 dB SPL at 1 kHz, 200 mW
(ActiveGard™ switched off)
105 dB SPL at 1 kHz
127 dB SPL at 1 kHz, 200 mW
(ActiveGard™ switched off)
Contact pressure
approx. 3.6 N approx. 3.6 N
Microphone
Typ e
BKE 4-4 cardioid BKE 4-4 cardioid
Transducer principle
pre-polarized
condenser microphone
pre-polarized
condenser microphone
Frequency response
40 – 20,000 Hz 40 – 20,000 Hz
Output voltage
4 mV/Pa ± 2.5 dB 4 mV/Pa ± 2.5 dB
Terminating impedance
min. 4,7 kO min. 4,7 kO
Supply voltage
5 V – 15 V DC 5 V – 15 V DC
General Data
Weight without cable
approx. 200 g approx. 200 g
Packaging
Individual package dimensions
194 mm x 84 mm x 249 mm 194 mm x 84 mm x 249 mm
Master carton dimensions
512 mm x 252 mm x 382 mm 512 mm x 252 mm x 382 mm
Units per master carton
12 12
Languages
German, English, French, Italian,
Spanish, Dutch, Russian
German, English, French, Italian,
Spanish, Dutch, Russian
Product versions
Model Item no. Description Cable, length 2 m
HME 26-100 (4)
504203 100 O per system, condenser
microphone cardioid
–
HME 26-600 (4)
504204 600 O per system, condenser
microphone cardioid
–
HME 26-100
50245 4 100 O per system, condenser
microphone omni-directional
–
HME 26-100-7
502455 100 O per system, condenser
microphone omni-directional
steel wire
cable with
open ends
HME 26-600
502467 600 O per system, condenser
microphone omni-directional
–
HME 26-600-7
502468 600 O per system, condenser
microphone omni-directional
steel wire
cable with
open ends
HME 26-600 S
502469 600 O, one side, condenser
microphone omni-directional
–
Model Item no. Description Cable, length 2 m
HMD 26-100
502451 100 O per system,
dynamic microphone cardioid
–
HMD 26-100-7
502452 100 O per system,
dynamic microphone cardioid
steel wire cable
with open ends
HMD 26-600
502463 600 O per system,
dynamic microphone cardioid
–
HMD 26-600-7
502464 600 O per system,
dynamic microphone cardioid
steel wire cable
with open ends
HMD 26-600 S
502465 600 O, one side,
dynamic microphone cardioid
–
HMD
26-600-X3K1
502466 600 O per system,
dynamic microphone cardioid
steel wire cable
with XLR-3
connector and
6.3 mm jack plug
HMDC 26-600
502453 NoiseGard™, 600 O per system,
dynamic microphone cardioid
–
HME 26 (4)
538370 03/10 Sennheiser is a registered trademark of Sennheiser electronic GmbH & Co. KG. www.sennheiser.com
Loading...