Sennheiser HME 26-100, HME 26-600, HME 26-600 S Product Sheet
HME 26
FOR CLEAR SPEECH TRANSMISSION
CONDENSER
MICROPHONE
PROFESSIONAL HEADPHONE WITH
The lightweight headsets in the HME 26
series, with their closed supra-aural design,
have been developed for use in radio and television
studios. The headphones are dimensioned for
particularly high sound pressure levels.
The headsets are exceptionally comfortable to
wear while providing a high degree of noise
attenuation.
With all versions in this series, ActiveGard protects
the user from extreme volume peaks. The omnidirectional condenser microphone features
excellent transmission qualities due to its linear
frequency response up to 20 kHz. The gooseneck
microphone boom can be worn on the left or right
side. This enables an exact, custom setting to the
individual needs of the user.
Lightweight
Extremely comfortable to wear due to the
two-piece padded headband and soft earpads
Single-sided cable
Headphones allow for high sound
pressure levels
ActiveGard™ (can be switched off)
Volume peaks above 105 dB are eliminated
“Flip-away” headphone allows
single-sided listening
Pre-polarized condenser microphone (omni-
directional) with linear frequency response
Flexible microphone boom can be worn on the
left or right-hand side
Microphone mutes by positioning the
microphone boom vertically
Cable, microphone boom and earpads can be
replaced easily
2 year warranty
HME 26
20
+10
+5
+15
-15
0
-5
-10
Hz
50 100 200 500 1K 2K 5K 10K
20K
d
B
r
125 Hz
250 Hz
500 Hz
1 kHz
2 kHz
4 kHz
8 kHz
16 kHz
5
10
15
20
25
dB
0
Microphone frequency response
Headphones frequency response
Headphones HME 26-100 HME 26-600 HME 26-600 S
Transducer principle
dynamic, closed dynamic, closed dynamic, closed
Ear coupling
supra-aural supra-aural supra-aural, single-sided
Frequency response
20 – 18,000 Hz 20 – 18,000 Hz 20 – 18,000 Hz
Impedance
50 O mono/100 O stereo 300 O mono/600 O stereo 600 O mono
THD
< 0.5 % at 1 kHz < 0.5 % at 1 kHz < 0.5 % at 1 kHz
Nominal SPL
105 dB SPL at 1 kHz, 1 mW
115 dB SPL at 1 kHz, 1 V
(ActiveGard™ switched off)
105 dB SPL at 1 kHz, 1 mW
107 dB SPL at 1 kHz, 1 V
(ActiveGard™ switched off)
105 dB SPL at 1 kHz, 1 mW
107 dB SPL at 1 kHz, 1 V
(ActiveGard™ switched off)
Max. SPL
128 dB SPL at 1 kHz, 200 mW
(ActiveGard™ switched off)
105 dB SPL at 1 kHz
(ActiveGard™ switched off)
127 dB SPL at 1 kHz, 200 mW
(ActiveGard™ switched off)
105 dB SPL at 1 kHz
(ActiveGard™ switched off)
127 dB SPL at 1 kHz, 200 mW
(ActiveGard™ switched off)
105 dB SPL at 1 kHz
(ActiveGard™ switched off)
Contact pressure
approx. 3.6 N approx. 3.6 N approx. 4.0 N
Microphone
Typ e
BKE 4-2 omni-directional BKE 4-2 omni-directional BKE 4-2 omni-directional
Transducer principle
pre-polarized
condenser microphone
pre-polarized
condenser microphone
pre-polarized
condenser microphone
Frequency response
40 – 20,000 Hz 40 – 20,000 Hz 40 – 20,000 Hz
Output voltage
4 mV/Pa ±2.5dB 4 mV/Pa ±2.5dB 4 mV/Pa ±2.5dB
Terminating impedance
min. 4.7 kO min. 4.7 kO min. 4.7 kO
Supply voltage
5 V – 15 V DC 5 V – 15 V DC 5 V – 15 V DC
General Data
Weight without cable
approx. 200 g approx. 200 g approx. 130 g
Packaging
packaging dimensions (W x H x D)
194 mm x 84 mm x 249 mm 194 mm x 84 mm x 249 mm 194 mm x 84 mm x 249 mm
Master carton dimensions (W x H x D)
512 mm x 252 mm x 382 mm 512 mm x 252 mm x 382 mm 512 mm x 252 mm x 382 mm
Units per master carton
12 12 12
Languages
German, English, French, Italian,
Spanish, Dutch, Russian
German, English, French, Italian,
Spanish, Dutch, Russian
German, English, French, Italian,
Spanish, Dutch, Russian
Technical Data
Near fiel Far field
538368 03/10 Sennheiser is a registered trademark of Sennheiser electronic GmbH & Co. KG. www.sennheiser.com
Product versions
Model Item no. Description Cable, length 2 m
HME 26-100 (4)
504203 100 O per system, condenser
microphone cardioid
–
HME 26-600 (4)
504204 600 O per system, condenser
microphone cardioid
–
HME 26-100
50245 4 100 O per system, condenser
microphone omni-directional
–
HME 26-100-7
502455 100 O per system, condenser
microphone omni-directional
steel wire
cable with
open ends
HME 26-600
502467 600 O per system, condenser
microphone omni-directional
–
HME 26-600-7
502468 600 O per system, condenser
microphone omni-directional
steel wire
cable with
open ends
HME 26-600 S
502469 600 O, one side, condenser
microphone omni-directional
–
Model Item no. Description Cable, length 2 m
HMD 26-100
502451 100 O per system,
dynamic microphone cardioid
–
HMD 26-100-7
502452 100 O per system,
dynamic microphone cardioid
steel wire cable
with open ends
HMD 26-600
502463 600 O per system,
dynamic microphone cardioid
–
HMD 26-600-7
502464 600 O per system,
dynamic microphone cardioid
steel wire cable
with open ends
HMD 26-600 S
502465 600 O, one side,
dynamic microphone cardioid
–
HMD
26-600-X3K1
502466 600 O per system,
dynamic microphone cardioid
steel wire cable
with XLR-3
connector and
6.3 mm jack plug
HMDC 26-600
502453 NoiseGard™, 600 O per system,
dynamic microphone cardioid
–
high frequencieslow frequencies
Mikrophone polar diagram
Loading...