Sennheiser HMDC 26-600 Product Sheet
HMDC 26
The lightweight headsets in the HMDC 26 series, with
their closed supra-aural design, have been developed for
professional broadcast applications. The headphones are
dimensioned for particularly high sound pressure levels.
The headsets are exceptionally comfortable to wear
while providing a high degree of passive noise
attenuation. In contrast to the HMD 26, the HMDC 26
is equipped with active noise compensation,
Sennheiser’s NoiseGard™.
This makes the headset particularly suited for use in
extremely noisy environments.
The dynamic microphone with a hyper-cardioid pattern
features excellent acoustic performance, with linear frequency response over a broad frequency range up to 16
kHz. Another important feature it is even less sensitive
against structure-born sound. The flexible gooseneck
microphone can be used on either the left or right side.
Both allow users to make exact adjustments to their
individual requirements.
Lightweight broadcast headset
Extremely comfortable to wear, even for extended
listening, due to a two-piece automatic
headband and soft ear pads
Single-sided cable
Headphones for high maximum SPL
Active Noise Reduction with NoiseGard
TM
Peak-level protection eliminates
volume peaks above 110 dB
“Flip-away” headphone allows single-sided listening
Dynamic microphone (hyper-cardioid) with linear
frequency response
Flexible microphone boom, can be worn on either left
or right-hand side
Microphone mutes when the boom arm is upright
Cable, microphone boom and ear pads can be changed
easily (modular concept)
2-year guarantee
FOR CLEAR SPEECH TRANSMISSION
DYNAMIC
MICROPHONE
PROFESSIONAL HEADPHONE WITH
30°
60°
90°
150°
120°
0°
10
20
30
40
50
dB
0
30°
60°
90°
120°
150°
180°
2 kHz
4 kHz
8 kHz
16 kHz
125 Hz
250 Hz
500 Hz
1 kHz
0
-5
+5
+10
+15
-10
-15
-20
-25
40 50 100 200 500 1K 2K 5K 10K
20K
20
+10
+5
+15
-15
0
-5
-10
Hz
50 100 200 500 1K 2K 5K 10K
20K
d
B
r
HMDC 26
Mikrophone polar diagram
high frequencieslow frequencies
ActivePassive
Microphone frequency response
Headphones frequency response
Farfield Nearfield
538364 03/10 Sennheiser and NoiseGard™ are registered trademarks of Sennheiser electronic GmbH & Co. KG. www.sennheiser.com
Headphone HMDC 26-600
Transducer principle
dynamic, closed
Ear coupling
supra-aural
Frequency response
20 – 18,000 Hz
Impedance
600 O mono / 1,200 O stereo
Sensitivity
108 dB SPL at 1 kHz, 1 mW
110 dB SPL at 1 kHz, 1 V
Maximal SPL
120 dB SPL at 1kHz
Active attenuation
18 dB (100 – 300 Hz)
Attenuation (active + passive)
15 – 30 dB
Distortion
< 0.5 % at 1 kHz
Contact pressure
approx. 3.6 N
Microphone
Typ e
BMD 424
Transducer principle
dynamic, hyper-cardioid characteristic
Frequency response
40 – 16,000 Hz
Freefield sensitivity, no load
0,4 mV / Pa at 1 kHz
Impedance
300 O
General data
Ambient temperature
Operation: -15 °C to +55 °C
Storage: -55 °C to +70 °C
Weight without cable
approx. 210 g
Power supply for NoiseGard™
(depending on type of cable)
2 x 1.5 V AA alkaline battery (IEC LR 6) or
2 x 1.2 V AA rechargeable battery (IEC LR 6) operating time with bat teries approx. 60 h
Packaging
Individual package dimensions
194 mm x 84 mm x 249 mm
Master carton dimensions
512 mm x 252 mm x 382 mm
Units per master carton
12
Languages
German, English, French, Italian, Spanish, Dutch, Russian
Technical Data
Product versions
Model Item no. Description Cable, length 2 m
HME 26-100 (4)
504203 100 O per system, condenser
microphone cardioid
–
HME 26-600 (4)
504204 600 O per system, condenser
microphone cardioid
–
HME 26-100
50245 4 100 O per system, condenser
microphone omni-directional
–
HME 26-100-7
502455 100 O per system, condenser
microphone omni-directional
steel wire
cable with
open ends
HME 26-600
502467 600 O per system, condenser
microphone omni-directional
–
HME 26-600-7
502468 600 O per system, condenser
microphone omni-directional
steel wire
cable with
open ends
HME 26-600 S
502469 600 O, one side, condenser
microphone omni-directional
–
Model Item no. Description Cable, length 2 m
HMD 26-100
502451 100 O per system,
dynamic microphone cardioid
–
HMD 26-100-7
502452 100 O per system,
dynamic microphone cardioid
steel wire cable
with open ends
HMD 26-600
502463 600 O per system,
dynamic microphone cardioid
–
HMD 26-600-7
502464 600 O per system,
dynamic microphone cardioid
steel wire cable
with open ends
HMD 26-600 S
502465 600 O, one side,
dynamic microphone cardioid
–
HMD
26-600-X3K1
502466 600 O per system,
dynamic microphone cardioid
steel wire cable
with XLR-3
connector and
6.3 mm jack plug
HMDC 26-600
502453 NoiseGard™, 600 O per system,
dynamic microphone cardioid
–
Loading...