Sennheiser e 604 Specifications

PRODUCT SPECIFICATION
evolution wired
e 604
1/2
The frequency response and cardioid pick-up pattern are optimized for drum sets and other percussion instrument miking, while also producing exceptional results on all forms of brass and woodwind.
An integral stand mount screws directly onto mic stands and included clip attaches mic to rims of drums. Very high sound pressure level handling, in excess of 160 dB, is com­bined with a balanced, clear, low distortion signal.
Lightweight voice coil provides extended high frequency and rapid transient response. A tough reinforced glass fiber body takes the knocks and shocks.
FEATURES
• Rugged reinforced glass fiber body
• Low sensitivity to impact and handling noise
• Very high sound pressure handling capability (in excess of 160 dB)
• Low distortion microphone
• Hum compensating coil
• Easy to position due to compact design
• Integral stand mount
SPECIFICATIONS
Transducer principle dynamic Frequency response 40 - 18,000 Hz Pick-up pattern cardioid Sensitivity (free field, at
1 kHz) Nominal impedance (at
1 kHz) Min. terminating impedance 1 kΩ Connector XLR-3 Dimensions ⌀ 33 x 59 mm Weight 60 g
1.8 mV/Pa
350 Ω
DELIVERY INCLUDES
• e 604
• pouch
• MZH 604 drum clip
• quick guide
• safety guide
ARCHITECT‘S SPECIFICATION
The instrument microphone shall be a dynamic cardioid designed for use with drums and percussion as well as brass and woodwind instruments.
It shall have a compact design and a rugged reinforced glass fiber body and shall feature an integral stand mount. The microphone shall be fitted with a hum compensating coil. The frequency response shall be 40 Hz – 18,000 Hz and the sensitivity (free field, no load) shall be 1.8 mV/Pa at 1 kHz. Nominal impedance shall be 350 Ω, with a min. ter­minating impedance of 1 kΩ. The microphone shall provide a 3-pin XLR connector. Dimensions shall be 33 x 59 mm (1.3" x 2.32"). Weight without cable shall be 60 grams (2.12 oz).
The microphone shall be the Sennheiser e 604.
DIMENSIONS
⌀33
1.3"
PRODUCT SPECIFICATION
evolution wired
e 604
0.92"
⌀23,29
78,23
3.08"
2/2
XLR 3
21,8
0.86"
59,95
2.36"
POLAR PATTERN FREQUENCY RESPONSE
dBV
-40
-50
-60
-70
-80
-90
50
0°, 1 m
0°, 5 cm
100
200
500
90°
60°
120°
150°
30°
180°
0 5
10
15
20
25 dB
180°
30°
150°
60°
120°
90°
125 Hz
250 Hz
500 Hz
1,000 Hz
2,000 Hz
4,000 Hz
8,000 Hz
16,000 Hz
1,000
2,000
5,000
21,8
0.86"
10,000
20,000
Hz
Sennheiser electronic GmbH & Co. KG · Am Labor 1 · 30900 Wedemark · Germany · www.sennheiser.com
Loading...