Sencor STM7875RS, STM7871GR, STM7876GD, STM7877CH, STM7878BK User Manual

STM 7870GG / STM 7871GR / STM 7872BL STM 7873VT / STM 7874RD / STM 7875RS STM 7876GD / STM 7877CH / STM 7878BK

EN Food Processor

Translation of the original manual

Copyright © 2019, Fast ČR, a.s.

- 1 -

04/2019

	EN	Food Processor
		Important safety instructions

READ CAREFULLY AND STORE FOR FUTURE USE.

■■ This appliance may be used by children 8 years of age and older and by persons with physical or mental impairments or by inexperienced persons, if they are properly supervised or have been informed about how to use the product in a safe manner and understand the potential dangers.

■■ Children must not use this appliance or play with it. Keep this appliance and the power cord out of reach of children.

■■ Before connecting this appliance to a power socket, make sure the rated voltage stated on its rating label corresponds to the voltage in your power socket.

■■ Never use accessories, which have not been supplied with this appliance or which have not been explicitly recommended by the manufacturer for this type of appliance.

■■ This appliance is designed for household use. Do not use it for commercial purposes, in industrial surroundings, or outdoors, or for purposes other than those for which it is intended.

■■ Always place the appliance on an even, dry and stable surface. Do not place it on an electric or gas stove, in the vicinity of an open flame or appliances that are sources of heat.

Do not put your hands into an area marked by this symbol. Otherwise injury could result when the multi-function head is tilted out and is not properly locked in the top position.

■■ Never use multiple attachments at the same time.

■■ Before putting the appliance into operation, check that it is correctly assembled and that the multi-function head is tilted down in the horizontal position. For­ safety reasons, this appliance is equipped with a safety mechanism that prevents the motor from being started when the multi-function head is tilted out.

■■ In the event that the multi-function head tilts out during operation, the appliance will automatically stop running. When the multi-function head is tilted to the horizontal working position, the appliance will not automatically resume operation. To start it again, it is necessary to press button A18 on the display.

■■ Do not touch rotating parts of the appliance and ensure that foreign items such as clothing, hair, etc. are kept away. An injury could occur or the appliance could be damaged.

Copyright © 2019, Fast ČR, a.s.

- 2 -

04/2019

■■ In the event that an item, such as a spoon, falls into the bowl during operation, immediately set the speed control knob to the OFF position (stand-by mode), and disconnect the power cord from the power socket. Wait until the rotating parts come to a stop and then remove the item.

■■ If ingredients stick to the attachment or the sides of the bowl, turn the appliance off, disconnect it from the power socket, and wait until the rotating parts come to a stop. Use a silicone spatula to clean the attachment and the inside of the bowl. Then you can restart the appliance.

■■ Make sure that no hair, clothing or other items enter the feed tube of meat grinder while it is running. Do not put anything other than the ingredients that are to be processed into the feed tube.

■■ Never use your fingers or other items to push ingredients through the meat grinder feed tube. For this purpose there is a pusher included as an accessory.

Warning:

Incorrect use may lead to injuries.

■■ To prevent injury caused by sharp edges, be especially careful when handling the grinding blade of the meat grinder and the blade assembly of the blender. Increased attention must also be paid when emptying out the blending jar, when removing the blade assembly from the blending jar, when removing the grinding blade from the chamber, and when cleaning the appliance.

■■ Do not attempt to grind bones, nut shells or other hard ingredients.

■■Hot liquids up to a temperature of 55 °C may be processed in the blending jar. Be especially careful when handling hot liquids. Hot steam or splashing hot foods and liquids may cause scalding. Never start the blender without the lid properly seated in position. When processing hot liquids, do not remove the inner cap during operation. Do not touch the hot surface. Use the handle to carry the blending jar when it is hot.

■■ The maximum continuous operating time is 10 minutes. Do not exceed the maximum operating time of 5 minutes when in the kneading mode and do not exceed the maximum operating time of 2 minutes when using the blender. Before starting it again, allow the appliance to cool down for 30 minutes.

■■ Always turn off the appliance, disconnect it from the power socket when not be using it, when leaving it without supervision, and before assembling, disassembling, cleaning or moving it. Prior to disassembling the appliance and replacing accessories or accessible parts that move during use, wait until all moving parts come to a stop.

■■ Clean it according to the instructions in chapter Cleaning and maintenance.

■■ Never wash the appliance under running water or submerge it in water or another liquid.

Copyright © 2019, Fast ČR, a.s.

- 3 -

04/2019