Blender
User's manual
EN
SBL 3271SS
SBL 3272RD
Prior to using this appliance, please read the user's manual thoroughly, even in cases, when one has
already familiarised themselves with previous use of similar types of appliances. Only use the appliance
in the manner described in this user’s manual. Keep this user's manual in a safe place where it can be
easily retrieved for future use.
We recommend saving the original cardboard box, packaging material, purchase receipt and
responsibility statement of the vendor or warranty card for at least the duration of the legal liability
for unsatisfactory performance or quality. In the event of transportation, we recommend that you pack
the appliance in the original box from the manufacturer.
EN-1
2015 11/2015
EN
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS .............................................................................................................3
DESCRIPTION OF THE APPLIANCE ................................................................................................................. 6
BEFORE FIRST USE .......................................................................................................................................... 7
ASSEMBLING AND DISASSEMBLING THE APPLIANCE .................................................................................. 7
OPERATING THE APPLIANCE ......................................................................................................................... 8
QUICK GUIDE TO PROCESSING INGREDIENTS ............................................................................................... 9
CLEANING AND MAINTENANCE ..................................................................................................................10
STORAGE ....................................................................................................................................................... 10
TECHNICAL SPECIFICATIONS ........................................................................................................................ 11
INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING MATERIALS .... 11
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT .............................................................. 11
SBL 3271SS / SBL 3272RD
Blender
EN-2
2015 11/2015
Blender
SBL 3271SS / SBL 3272RD
IMPORTANT SAFETY INSTRUCTIONS
READ CAREFULLY AND STORE FOR FUTURE USE.
• This appliance can be used by persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and if they
understand the hazards involved.
• Children shall not use the appliance and play with it. Keep this
appliance and its power cord out of the reach of children.
• Before connecting this appliance to a power socket, make sure
the voltage stated on its rating label corresponds to the voltage
in your power socket.
• Use the appliance only with the original accessories supplied
with it.
• The appliance is intended and designed for processing
a standard amount of food in the household.
• Do not use this appliance for other than its intended use.
• Do not use the appliance in an industrial environment or
outdoors.
• Do not place the appliance on an electric or gas stove or in its
vicinity, on the edge of a table or on an unstable surface. Only
place the appliance on an even, dry and stable surface.
• Always ensure the appliance is properly assembled before
operating.
• Hot liquids or foods need to be allowed to cool down to at
least 50 °C before being placed inside the blending jar.
• Do not leave the appliance in continuous operation for longer
than 2 minutes. Before turning it on again, allow it to cool
down for at least 2 minutes. When processing hard foods or
liquids with a very thick consistency, do not leave the appliance
in continuous operation for longer than 1 minute.
• While blending, do not put your hands or items, such as
kitchen knives, forks or wooden spoons into the blending jar.
EN
EN-3
2015 11/2015
EN
Otherwise, an injury could occur or the appliance could be
damaged.
• In the event that food is sticking to the blade assembly or the
walls of the blending jar, turn the appliance off by turning
the speed dial to position 0 (Off) and disconnect it from the
power socket. Ensure the blade assembly has stopped rotating.
Carefully remove the blending jar from the motor unit. Remove
the lid and using a plastic spatula clean the blade assembly and
the walls of the blending jar. Put the lid back on and reattach
the blending jar to the motor unit. Plug the power cord into
a power socket and continue blending.
• Do not submerge the motor unit and its power cord in water
or any other liquid, or wash these parts under running water.
• When handling the blade assembly, when taking it out of the
blending jar or grinder and when cleaning it, take special care
to avoid injury. The blades are sharp.
• Do not turn the appliance on when empty. The incorrect use of
the appliance may negatively affect its lifetime.
• Always turn off the appliance by turning the speed dial to
position 0 (Off) and disconnect it from the power socket when
not in use and when leaving it without supervision, before
assembly, disassembly, changing accessories, before cleaning or
moving it.
• Check that the motor unit is turned off, disconnected from
the power socket and that the rotating parts have come to
a complete stop before removing the blending jar or grinder
from the motor unit.
• Ensure that the power plug does not come into contact with
moisture. Do not place heavy items on the power cord. Make
sure the power cord does not hang over the edge of a table or
that it does not touch a hot surface.
• Do not disconnect the appliance from the power socket by
pulling on the power cord. This could damage the power cord
or the power socket. Disconnect the cord from the power
socket by gently pulling on the plug of the power cord.
SBL 3271SS / SBL 3272RD
Blender
EN-4
2015 11/2015
Blender
SBL 3271SS / SBL 3272RD
• If the power cord is damaged, have it replaced at a professional
service centre. It is forbidden to use the appliance if it has
a damaged power cord or plug.
• Do not use the appliance when it is not operating properly or
showing signs of damage.
• In order to prevent a hazardous situation arising, do not repair
the appliance yourself or modify it in any way. Have all repairs
performed at an authorised service centre. By tampering with
the appliance you risk voiding your legal rights arising from
unsatisfactory performance or quality warranty.
EN
EN-5
2015 11/2015
EN
SBL 3271SS / SBL 3272RD
DESCRIPTION OF THE APPLIANCE
A
1
2
3
4
Blender
0
qa
5
6
7
8
9
1 Inner cap
2 Lid with an opening
The opening is used for adding
ingredients into the blending jar while
blending.
3 Glass blending jar with 800 ml capacity
4 Gasket seal
5 Blender blade assembly (four blade
assembly)
6 Blender blade attachment collar
7 Motor unit
Note:
The blender comes with 1 spare gasket seal.
2015 11/2015
8 Speed dial
it is used to turn off the unit and to set
its speed.
P–0–1–2 (pulse level – off – speed 1 –
speed 2)
9 Anti-slip feet
0 Glass grinding jar with 70 ml capacity
qa Gasket seal
qs Grinding blade assembly (two blade
assembly)
qd Grinding blade attachment collar
EN-6
qs
qd
Blender
SBL 3271SS / SBL 3272RD
BEFORE FIRST USE
1. Take the appliance and its accessories out of the packaging materials.
2. Thoroughly wash all parts intended for contact with food (inner cap A1, outer lid A2, blending
jar A3, gasket seal A4 and Aqa, blade assembly A5 and Aqs, attachment collar A6 and Aqd,
grinding jar A0), using warm water and a neutral kitchen detergent. Then rinse them with clean
water and dry thoroughly with a fine wiping cloth.
Attention:
When cleaning the blending and grinding blade assemblies A5 and Aqs take special care to
avoid injury. The blades A5 and Aqs are sharp.
ASSEMBLING AND DISASSEMBLING THE APPLIANCE
• Before you start assembling or disassembling the appliance, check that the motor unit A7 is turned
off and disconnected from the power socket and that the rotating parts have come to a complete
stop.
1. Assembling and disassembling the blending jar
1.1 Place the gasket seal A4 on to the blade assembly A5. Make sure that the gasket seal A4 properly
adheres along the entire perimeter of the blade assembly A5.
1.2 Place the blade assembly A5 with the gasket seal A4 into the attachment collar A6. Then, from
underneath, place this assembly against the blending jar A3. Screw the collar A6 to the blending
jar A3 anticlockwise and tighten firmly.
1.3 Place the inner cap A1 into the opening in the lid A2 so that the tabs along the perimeter of
the cap A1 slide into the grooves in the lid A2. Turn the cap A1 clockwise to secure it in the lid
A2. When you have placed all the necessary ingredients into the blending jar A3, close it with
the assembled lid. The lid needs to be properly pushed down along the entire perimeter so that it
adheres well to the edge of the blending jar A3.
1.4 When disassembling the blending jar, proceed in the reverse sequence.
2. Assembling and disassembling the grinder
2.1 Turn the grinding jar A0 so that the opening faces upwards. Place the gasket seal Aqa on to
the blade assembly Aqs. Make sure that the gasket seal Aqa properly adheres along the entire
perimeter of the blade assembly Aqs.
2.2 Place the blade assembly Aqs with the gasket seal Aqa into the opening of the jar A0 so that
the blades point into the jar A0. Attach the blade unit Aqs to the jar A0 by screwing collar Aqd
clockwise. Turn the assembled grinder so that the collar Aqd is facing downwards.
Note:
Place food into the jar A0 before attaching it to the blade assembly Aqs.
Unless you are grinding coffee beans, use blade assembly A5 instead of blade assembly Aqs.
Further instructions regarding the selection of the correct type of blade assembly can be found
in chapter Quick guide to processing ingredients.
2.3 When disassembling the grinder, proceed in the reverse sequence.
3. Attaching the blending jar and grinder to the motor unit and their removal
3.1 Place the motor unit A7 on an even, dry surface, for example on a kitchen countertop. On to the
motor unit A7 place the blending jar or grinder assembly and turn it clockwise all the way so that
it is secured on the motor unit A7. When the blending jar or grinder assembly is correctly attached
to the motor unit A7, it is not possible to freely lift it off the motor unit A7.
EN
EN-7
2015 11/2015
EN
Attention:
The safety mechanism will prevent the appliance from being started unless the blending jar or
grinder assembly is properly attached to the motor unit A7.
3.2 To remove the blending jar or grinder from the motor unit A7, proceed in the reverse sequence.
OPERATING THE APPLIANCE
1. Using the blender
1.1 Make sure that the motor unit A7 is turned off and disconnected from the mains power socket.
1.2 Assemble the blender according to the instructions in chapter Assembling and disassembling the
appliance.
1.3 Place the food or pour the liquids that you wish to blend into the blending jar A3. Close the
blending jar A3 using the lid according to the instructions in chapter Assembling and disassembling
the appliance.
Note:
The maximum capacity of the blending jar A3 is 800 ml. We recommend that the blending jar is
not filled with more than 600 ml of liquids. Certain liquids increase their volume during mixing,
and therefore it is better to blend them gradually in smaller batches.
1.4 Connect the power cord to the power socket and set the speed dial A8 to the required speed
level of 1 or 2. Level 1 is slower and level 2 is faster. We recommend to first set the slower speed to
allow the ingredients to mix together. Then you can increase the speed to level 2. While blending,
always use your hand to hold down the lid A2 from above. The pulse level is appropriate when
you wish to blend food only very quickly. To start the pulse level, turn the speed dial A8 to the
position "P" and hold it in this position for a moment. As soon as you release the speed dial A8, it
will automatically return to position 0 (Off).
Attention:
The maximum operating time is 2 minutes. Do not leave the appliance in continuous operation
for longer than indicated above. Then allow the appliance to cool down for 2 minutes. When
processing hard food or liquids with a very thick consistency, do not leave the appliance in
continuous operation for longer than 1 minute.
1.5 While blending, you may add food or liquids to the blending jar A3 through the hole i the lid A2
after removing the inner cap A1.
1.6 In the event that food is sticking to the blade assembly A5 or the walls of the blending jar A3,
turn the appliance off by turning the speed dial to position 0 (Off) and disconnect it from the
power socket. Make sure that the blade assembly A5 has stopped rotating. Carefully remove the
blending jar from the motor unit A7. Take off the lid A2 and using a plastic spatula clean the
blade assembly A5 and the walls of the blending jar A3. Put the lid A2 back on and reattach
the blending jar to the motor unit A7. Plug the power cord into a power socket and continue
blending.
1.7 After you have finished using the appliance, set the speed dial A8 to position 0 (Off) and disconnect
the power cord from the power socket. Check that the blade assembly A5 has stopped rotating
and take the blending jar off the motor unit A7. Use a soft plastic spatula to remove food from
the blending jar A3.
1.8 Disassemble the blending jar according to the instructions contained in chapter Assembling and
disassembling the appliance, and clean it according to the instructions in chapter Cleaning and
maintenance.
2. Using the grinder
2.1 Make sure that the motor unit A7 is turned off and disconnected from the mains power socket.
2.2 Place the food that you wish to grind up into the grinding jar A0. The grinder is suitable for
grinding nuts (with shells removed), coffee beans, spices, etc. The maximum amount of food
that can be placed in the jar A0 is indicated by the MAX mark. Do not overfill the jar A0.
SBL 3271SS / SBL 3272RD
Blender
EN-8
2015 11/2015
Blender
SBL 3271SS / SBL 3272RD
When using the grinder, proceed according to the instructions in the guide for processing
ingredients on pages 9 and 10.
2.3 Assemble the grinder and attach it to the motor unit A7 according to the instructions in chapter
Assembling and disassembling the appliance.
2.4 Connect the power cord to the power socket and set the speed dial A8 to the required speed level
of 1 or 2. Level 1 is slower and level 2 is faster. We recommend to first set the slower speed. Then
you can increase the speed to level 2. The pulse level is appropriate when you wish to blend food
only very quickly. To start the pulse level, turn the speed dial A8 to the position "P" and hold it in
this position for a moment. As soon as you release the speed dial A8, it will automatically return
to position 0 (Off).
Attention:
The maximum operating time is 2 minutes. Do not leave the appliance in continuous operation
for longer than indicated above. Then allow the appliance to cool down for 2 minutes. When
processing hard foods, do not leave the appliance in continuous operation for longer than 1
minute.
2.5 After you have finished using the appliance, set the speed dial A8 to position 0 (Off) and disconnect
the power cord from the power socket. Check that the grinding blade assembly A5 has stopped
rotating and take the grinder off the motor unit A7.
2.6 Disassemble the grinder according to the instructions in chapter Assembling and disassembling the
appliance. Use a soft plastic spatula to remove food from the blending jar A0. Then clean all used
parts according to the instructions in chapter Cleaning and maintenance.
3. Advice and tips for blending
• First cut food with a firm consistency such as fruit and vegetables into smaller pieces measuring 2
to 3 cm and only then place it inside the blending jar A3.
• It is better to separate larger amounts of ingredients into several smaller batches. First blend one
batch and then gradually add further batches through the hole in the outer lid A2 while blending.
In this way, you will achieve better results than by adding all ingredients into the blending jar
A3 at once. Before adding every additional batch, first check that the maximum capacity of the
blending jar A3 will not be exceeded.
• If you need to blend food of a solid consistency together with liquids, we recommend that you first
blend the food of solid consistency with a smaller amount of the liquids. Then gradually add the
remaining liquids through the hole in the outer lid A2 while blending. While blending, always use
your hand to hold down the lid A2 from above.
• To blend very thick liquids, we recommend using the pulse level so that the blade assembly A5
does not get jammed. Start the blender repeatedly in short intervals.
• Ice cubes must be processed immediately upon being removed from the freezer. When the ice starts
to melt, the ice cubes will stick together and it will not be possible to blend them.
EN
QUICK GUIDE TO PROCESSING INGREDIENTS
Blender (four blade assembly)
Ingredients Speed selection Recommended blending time
Fruit, vegetables cut into smaller pieces 1 30 s
Baby food 1 40 s
Spreads, dressings, marinades 1 30 s
Smoothies and cocktails 2 40 s
Soups 2 30 s
Ice cubes P (Pulse level) –
EN-9
2015 11/2015
EN
Grinder (two blade assembly)
Ingredients Speed selection Recommended mixing time
Coffee beans P (Pulse level) –
Grinder (four blade assembly)
Ingredients Speed selection Recommended mixing time
Pepper 2 + Pulse level 30 s
Bay leaf 2 + Pulse level 30 s
Crystal sugar 2 + Pulse level 30 s
Allspice 2 + Pulse level 30 s
Garlic 2 + Pulse level 30 s
Nuts (with shells removed) 2 + Pulse level 40 s
Note:
The above food processing times are only a reference. The actual mixing time depends on the
size of the ingredients, their amount and the required final consistency.
CLEANING AND MAINTENANCE
• Before cleaning make sure that the appliance is turned off, disconnected from the power socket
and that the rotating parts have stopped.
• Disassemble the blending jar or grinder assembly according to the instructions in chapter
Assembling and disassembling the appliance. Thoroughly wash the individual parts of the blending
jar or grinder using warm water and a neutral kitchen detergent. Then rinse them under clean
running water and thoroughly wipe dry with a fine wiping cloth or allow them to dry naturally.
These parts may also be washed in a dishwasher.
Attention:
When removing and cleaning the blending or grinding blade assemblies A5 and Aqs take
special care to avoid injury. The blades A5 and Aqs are sharp.
• To clean the outer surface of the motor unit A7, use a cloth dipped in a weak detergent solution.
After applying the kitchen detergent, wipe the surface with a cloth lightly dampened in clean
water and then wipe dry.
• Never submerge the motor unit A7 or the power cord in water or in any other liquid. Do not use
thinners or solvents or cleaning agents causing abrasion to clean the appliance. Otherwise the
surface of the appliance may be damaged.
SBL 3271SS / SBL 3272RD
Blender
STORAGE
• Store the appliance in a dry place out of the reach of children.
EN-10
2015 11/2015
Blender
SBL 3271SS / SBL 3272RD
TECHNICAL SPECIFICATIONS
Rated voltage range .......................................................................................................................220−240 V
Rated frequency .................................................................................................................................50/60 Hz
Rated power input .................................................................................................................................250 W
Noise level .......................................................................................................................................... 87 dB(A)
The declared noise emission level of the appliance is 87 dB(A), which represents a level A of acoustic
power with respect to a reference acoustic power of 1 pW.
Changes to text and technical parameters are reserved.
INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED
PACKAGING MATERIALS
Dispose of used packaging material at a site designated for waste in your municipality.
EN
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT
This symbol on products or original documents means that used electric or electronic
products must not be added to ordinary municipal waste. For proper disposal, renewal
and recycling hand over these appliances to determined collection points. Alternatively,
in some European Union states or other European countries you may return your
appliances to the local retailer when buying an equivalent new appliance.
Correct disposal of this product helps save valuable natural resources
and prevents potential negative effects on the environment and human health, which
could result from improper waste disposal. Ask your local authorities or collection
facility for more details.
In accordance with national regulations penalties may be imposed for the incorrect
disposal of this type of waste.
For business entities in European Union states
If you want to dispose of electric or electronic appliances, ask your retailer or supplier
for the necessary information.
Disposal in other countries outside the European Union.
This symbol is valid in the European Union. If you wish to dispose of this product,
request the necessary information about the correct disposal method from the local
council or from your vendor
This appliance meets all the basic requirements of EU directives related to it.
EN-11
2015 11/2015
EN
Blender
SBL 3271SS / SBL 3272RD
EN-12
2015 11/2015
Loading...