Senco XtremePro SCN65XP Specifications
SCN65XP
XtremePro™ 3½" Rugged-Duty Coil Nailer
The rugged-duty SENCO® SCN65XP Coil Nailer is light enough for
one-handed operation. It can hold up to 275 nails (depending upon nail
type) for maximum productivity in a wide variety of applications.
O
R
U
L
N
L
D
U
F
H
D
E
A
Tool Specifications:
Item #: 540101N - Sequential actuation
Tool Weight: (Unloaded) 8 lbs. (3.6 kg)
Height: 141⁄8" (359 mm)
Length: 127⁄8" (327 mm)
Collation: Flat, angled coil wire
Operating Pressure: 70-120 p.s.i.g. (4.8-8.3 bar)
Mode of Operation: Tool is avilable with either sequential or contact
actuation trigger mechanism.
Hose Fitting: 3⁄8 " NPT
Fastener Specifications:
Drives .099 – .131, Smooth 2”– 3½”, Ring 2” – 3”,
Screw 1¾” – 3”. Round-Head Nails. . Capacity 250-275
23/8
21/221/4
3
2
BK, HK (.099, .120)
BL, GL, HL (.099, .113, .120)
HD (.120)
31/4 31/2
Applications:
For on-site, manufactured housing, including framing, sheathing,
decking, subflooring, and exterior decks. Also, industrial markets such
as heavy-duty pallet construction, pallet repair, and crate and box
assembly.
Features and Benefits:
• Highest power-to-weight ratio in its class
• Light enough for one-handed operation for quality workmanship and
greater productivity
• Adjustable depth-of-drive allows for precise countersinking at a
lower air pressure
• High load capacity (up to 275 nails)
• Fast cycle time increases productivity
• E-Z load design saves time
• Five full year limited warranty
GD, KD (.113, .131)
There are eight styles of 16 different nails in plain, ring, and screw shanks.
Choose the right trigger system for your specific needs!
Seq uential Actuation Trigge r (also kn own as restrictive trigger or trigger fire)
op erates i n the fo ll owing a sequence - depress th e safety element at the n ose o f tool
against th e wo rk surface then pu ll the trigg er. After each fastener is driven, release the
trigger and li ft th e tool off the work surface befo re starting th e sequ ence again. Th is
trigger is recommended and acceptable fo r most app li cations.
Con tact Actua tion Trigg er (also kno wn as du al action, bounce or botto m fire)
op erates i n the fo ll owing sequence- p ul l the trig ger first and keep the trigger pu ll ed
while moving th e to ol alo ng the wo rk surface wi th a bo un cin g motion, depressin g
the safety elemen t at th e no se of the tool against the w ork surface wh ere the fastener is
to be d riven. Th is trig ger is recommended for u se by trained professionals only in
hi gh produ ction o r volume app lication s.
Alw ays read the Operators Manual and Safety Instructions with all too ls to ensure
prop er use and safety precautions. For additional in formation on trigger systems and
ho w SENCO will save you time, redu ce costs, and increase quali ty, call o ur to ll-free
Actio n Line: 8 00-54 3-4596 to find you r nearest Auth orized Senco Dealer, Distribu tor
or visit o ur web site at: www.sen co.co m
©2007 Senco Products, Inc.
www.senco.com
®
Loading...