Senco XtremePro SCN60XP Specifications

SCN60XP

XtremePro™ 2½" Rugged-Duty Coil Nailer

The rugged-duty SENCO® SCN60XP Coil Nailer is light enough for
one-handed operation, yet is up to 25% more powerful. It can hold up to
275 nails (depending upon nail type) for maximum productivity in a
wide variety of applications.

O

R

U

L

N

L

D

U

F

H

D

E

A

Tool Specifications:

Item #: 520101N - Contact actuation
Tool Weight: (Unloaded) 7.5 lbs. (3.4 kg)
Height: 123⁄8" (314mm)
Length: 14" (356 mm)
Collation: Flat, angled coil wire
Operating Pressure: 70-120 p.s.i.g. (4.8-8.3 bar)
Mode of Operation: Tool is avilable with either sequential or contact
actuation trigger mechanism.
Hose Fitting: 3⁄8" NPT

Fastener Specifications:

Drives 11, 11.5 and 12.5 Gauge. Round-Head Nails, 2"– 2½" 6d to 9d
Nail Range. Capacity 250-275

23/8

21/221/4

2

BK (.099)

BL (.099)

Applications:

For on-site, manufactured housing, including sheathing, decking,
subflooring, and exterior decks. Also, industrial markets such as
heavy-duty pallet construction, pallet repair, and crate and box
assembly.

Features and Benefits:

• Highest power-to-weight ratio in its class

• Light enough for one-handed operation for quality workmanship and
greater productivity

• Adjustable depth-of-drive allows for precise countersinking at a
lower air pressure

• High load capacity (up to 275 nails)

• Fast cycle time increases productivity

• E-Z load design saves time

• Five year limited warranty

Always read the Operators Manual and Safety Instructions with all tools to ensure proper
use and safety precautions. For additional information on trigger systems and how SENCO
will save you time, reduce costs, and increase quality, call our toll-free Action Line:
800-543-4596 to find your nearest Authorized Senco Dealer, Distributor or visit our web
site at: www.senco.com

©2007 Senco Products, Inc.

GL (.113)

GD (.113)

Choose the right trigger system for your specific needs!

Seq uential Actuatio n T rigg er (also kn own as restrictive trigger or trig ger fire)

op erates in th e fol lowing a sequence - d epress the safety element at the n ose of too l
against the work surface then pull the trigger. After each fastener is d riven, release th e
trigger and lift the to ol o ff the work surface before starting the seq uence ag ain. Th is
trigger is recommended and acceptable for most appli cation s.

Con tact Actua tion Trigger (also known as dual action , boun ce or bottom fire)
op erates in th e fol lowing sequ ence- p ull the trig ger first an d keep the trig ger pull ed
while movi ng the to ol along the wo rk surface wi th a bou ncing motion, dep ressin g
the safety element at the n ose o f the tool against th e work surface wh ere the fastener is
to be driven. This trigger i s recommended for u se by train ed p rofession als only in
hi gh prod uction or volume applications.

www.senco.com

®