Senco SN70XP User Manual

SN70XP Clipped Head

XtremePro

™

3½" Framing/Sheathing Nailer

Versatile pneumatic nailer drives ring, screw, and smooth-shank nails for
tough fastening jobs. The rugged and reliable SN70XP drives full 3½" nails
into hard woods; 2¼" hardened steel nails into concrete with power to spare.
Its tilted 30˚ magazine permits maximum maneuverability in tight work areas.
It has an ergonomically designed handle for superior balance and operating
comfort.

Tool Specifications:

SN70XP: 170301N - Sequential actuation
SN70XP-TN: 170302N - Sequential actuation
Tool Weight: 9.6 lbs. (3.6 kg)
Height: 14 ½" (368 mm)
Length: 15 ¾" (400 mm)
Collation: 20˚ strip
Operating Pressure: 70-120 p.s.i.g. (4.8-8.3 bar)
Mode of Operation: Tool is avilable with either sequential or contact
actuation trigger mechanism.

Hose Fitting: 3 ⁄8 " NPT

Fastener Specifications:

Drives .113 – .131, Smooth 2”– 3 ½”, Ring 2” – 3”,
Screw 2 ½” – 3”. . Capacity 50 – 70

HC (.120)

KC (.131)

GC (.113)

HF (.120)

HE (.120)

GE (.113)

Applications:

Truss building, framing, sub-flooring, sheathing, decks. Drives hardened
steel nails into wood-to-green concrete. Other applications include crate and
box assembly, pallet making, furniture frame assembly, and cabinet work.

Features:

Paramount among the features of the SN70XP is the wide range of fasteners it
drives. This tool, like all SENCO tools, is designed for optimum performance
with minimum maintenance. Snap-open tool nose permits quick and easy
clearing of fastener jams.

Choose the right trigger system for your specific needs!

Seq uential Actua tion Trigg er (also known as restricti ve trigger or trigg er fire) op erates in

the follo wing a sequence - depress th e safety el ement at th e nose o f to ol against the work
surface then p ul l the trigg er. After each fastener is d riven, release the trigg er and lift the to ol
off the work surface before startin g the sequen ce agai n. This trigger is recommend ed and
acceptabl e for most app li catio ns.

Con tact Actua tion Trigg er (also known as du al acti on , boun ce or b ottom fire) o perates in
the follo wing sequ ence- pull the trigg er first and keep th e trig ger p ul led while movi ng th e
too l alo ng th e wo rk surface with a bo uncing motion , d epressin g the safety el ement at th e
no se of the too l against th e w ork surface w here the fastener is to be d riven. This trigger is
recommend ed for u se by trained professionals on ly in hi gh p rod uction o r volume
app li cations.

Alw ays read the Operators Manual and Safety Instruction s wi th all tool s to ensu re prop er use
and safety precautio ns. For additio nal info rmation on trigg er systems and h ow SE NCO will
save you time, redu ce costs, and i ncrease quality, call ou r tol l-free Actio n Li ne:
80 0-543 -4596 to find you r nearest Auth oriz ed Senco Dealer, Distributo r or vi sit o ur web
site at: www.senco.co m

2

21/4

23/8
21/2

3

31/4

31/2

ICBO APPROVES SENCO 2 1/4” HARDENED STEEL NAIL
for anchoring wood sill plates to concrete with Model SN70.

Research committee report No. 3538, issued March 1979, recommends: SENCO 2 1/2” hardened steel nails for

non-load-bearing inter ior plate anchorage driven with a maximum spacing of 20˚ into concrete having a

minimum curing time of 7 days or compressive strength of 2000 psi. Wood sills must have 1 ½" thickness.

©2007 Senco Products, Inc.

www.senco.com

®