Senco 57F User Manual
PalletPro™57F
Coil Nailer
Tool Specifications:
Item #: 4L0001N Contact Actuation (Dual Action)
Weight: 5.9 lbs. ( 2.67 kg)
Height: 11.14" (283 mm)
Length: 11.97" (304 mm)
Nail Capacity: 300 - 350
Operating Pressure: 70-120 psig (4.8-8.3 bar)
Mode of Operation: Tool is available with either sequential
or contact actuation trigger mechanism.
Hose Fitting: 3⁄8“ NPT
Fastener Specifications:
A
R
E
Y
L
I
M
I
1
T
A
E
R
D
R
W
A
O
R
U
L
N
L
D
U
F
Y
T
N
H
D
E
A
The PalletPro™ 57F Coil Nailer is built for high speed operation, this
coil nailer is designed to handle the toughest production applications.
Applications:
A lightweight and versatile tool for boxes and crates, carton-to-skid and
pallets.
Features and Benefits:
• Collation – wire weld
• Aluminum mainbody – tool weighs only 5.9 lbs.
• Adjustable nail canister accommodates wide range of nails
• High capacity nylon magazine – fast and easy loading
• Body protection – side steel wearplates reduce abrasion of tool
• High durability driver and piston bumper for long life
For additional information on how SENCO will save you time, reduce
costs, and increase quality, call us at 1-800-543-4596 to find your
nearest Authorized Senco Dealer or Distributor or visit our web site at:
www.senco.com
Drives full round head coil nails from 1" - 2¼" smooth and ring shank,
.082 - .092 diameter.
1
1¾
17⁄
8
EL
.092
2
2¼
}
2
} ED
.082
Seq uen tial Actuation T rigg er (also kn ow n as restrictive trig ger or trig ger fi re)
op erates in the foll ow in g sequ ence - d epress th e safety element at th e n ose o f tool
against the w ork surface then pul l the trigger. After each fastener is d riven, release
the trigg er and lift the too l off the wo rk surface befo re starting the sequ ence again.
Th is trigger is recommend ed and acceptabl e fo r most appl ication s.
Con tact Actua tion Trigge r (also kno wn as d ual acti on, bou nce or b ottom fire)
op erates in the foll ow in g sequ ence- pul l the trigger fi rst and keep the trigger pul led
whil e moving th e to ol along th e work surface with a bo un cing moti on, depressing
the safety element at th e n ose of the too l against the work surface where the fastener
is to be driven. T his trigg er is recommended fo r use by trained professio nal s o nl y
in h ig h produ ction o r vol ume appl ications.
Alw ays read the Operators Manual an d Safety In structio ns with all to ols to ensure
prop er use and safety p recautio ns or l og on to w ww.senco .com or call
1-80 0-543 -45 96 for more info rmation o n SENCO’s trigger systems. Choo se th e
righ t trigger system fo r you r specific needs!
.082
.092
©2007 by Senco Products, Inc. www.senco.com
Loading...