Senco 41XP User Manual

FinishPro®41XP

XtremePro™ 15 Gauge Finish Nailer

Specifications:

2

Extreme work calls for extreme tools, and the
FinishPro 41XP is up to the challenge! With a variety
of features designed to make any job easier, the
FinishPro 41XP is ideal for the most demanding Pro.

Applications:

Interior trim, exterior trim, crown molding, base
molding, door and window casings, cabinets, chair
rails, hardwood flooring

Item”: 1Z0001N Sequential Actuation (Restrictive)
Tool Weight: 4 lbs (3.6 kg)
Height: 11-5/8” (249 mm)
Length: 13” (330 mm)
Nail Capacity: 100
Reg. Operating Pressure: 70-120 psig
Mode of Operation: Tool is available with either contact
actuation or sequential trigger mechanism
Hose Fitting: 1/4" NPT

Fastener Specifications:

Gauge: 15
Fastener Range: 1-1/4” – 2-1/2”
Finish: Bright Basic/Galvanized nails

2 21/4 13/4 11/2 11/4 21/2

DA

FinishPro®41 Features and Benefits:

• Two-year limited warranty

• Adjustable depth-of-drive

• NeverLube® technology – no lubrication required

• Easy-clear latch – to clear jams fast

• No-mar pads with onboard storage to protect work
materials

• Magnesium housing - lightweight and comfortable

to use all day

• Comfort and convenience features include:
overmold comfort grip, overmold trigger, 360°
adjustable exhaust

• Construction ruler – for quick measurements

• Advanced belt hook – convenient storage

©2007 Senco Products, Inc.

www.senco.com

®

FinishPro®41XP

XtremePro™ 15 Gauge Finish Nailer

Adjustable Exhaust –

No tools required,
quiet design

Magnesium housing –

- lightweight

SENCO Exclusive
NeverLube® Design –

Keeps the work
surface free of oil

Easy-Clear Guide Body –

To clear jams fast

Overmold Grip –

Reduces vibration and fatigue,
increases productivity

Overmold Trigger –

Reduces fatigue

Construction Ruler –

For quick measurements

Extra Onboard –

No-Mar Pads

Belt Hook –

Lets the tool go
where you go

No-Mar Pad –

Protects woodwork

Choose the right trigger system for your specific needs!

Sequential Actuation Trigger (also known as restrictive trigger or trigger fire) operates in the

following a sequence - depress the safety element at the nose of tool against the work surface
then pull the trigger. After each fastener is driven, release the trigger and lift the tool off the work
surface before starting the sequence again. This trigger is recommended and acceptable for most
applications.

Contact Actuation Trigger (also known as dual action, bounce or bottom fire) operates in the
following sequence- pull the trigger first and keep the trigger pulled while moving the tool along
the work surface with a bouncing motion, depressing the safety element at the nose of the tool
against the work surface where the fastener is to be driven. This trigger is recommended for use
by trained professionals only in high production or volume applications.

©2007 Senco Products, Inc.

Variable Thumb wheel Adjustable
Depth-of-Drive –

Allows user to achieve the right
depth of countersink

www.senco.com

Alw ays read the Operators Manual and Safety In structio ns with all too ls to en sure
prop er use an d safety precautions. For addi tional i nfo rmatio n on trig ger systems and
ho w SENCO wi ll save you ti me, reduce co sts, an d increase qu ali ty, call o ur toll-free
Actio n Li ne: 80 0-543 -4596 to fin d you r nearest Autho rized Senco Dealer, Distributor
or visit o ur w eb si te at: www .senco .com

®