Senao Networks PCE4551AH User Manual

802.11 a/n/ac Module

PCE4551AH

User’s Manual

PRODUCT DESCRIPTION

Support 5GHz

64-bit PCI

-E

Antenna Connectors

802.11a

≤-

94dBm@6Mbps

The PCE4551AH is a 5H dual band concurrent 3T3R PCIe module base

On QCA9890 solution.

P

RODUCT SPECIFICATION

RF Specification

Radio 1
Interface
Operating Voltage

Frequency Band

Date Rate
Receive Sensitivity (Typical)

3.3V
I-PEX

802.11 a/n/ac
5150-5850MHz
1300Mbps

≤-76dBm@54Mbps

802.11a/n_HT20 ≤-93dBm@MCS0/8/16
≤-74dBm@MCS7/15/23

802.11n_HT40 ≤-92dBm@MCS0/8/16
≤-72dBm@MCS7/15/23

802.11ac_HT80 ≤-89dBm@MCS0
≤-64dBm@MCS9

PRODUCT Pin Define

Type

Connector 5150-5250MHz 5250-5350MHz 5470-5725MHz 5725-5850MHz

Dipole UFL 3dBi 3dBi 3dBi 3dBi

Dipole UFL 5.5dBi 5.5dBi 5.5dBi 5.5dBi

PIFA UFL 6dBi 6dBi 6dBi 6dBi

Note: The EUT has three antennas. (3TX/3RX)

Any change or modifications not expressly approved by the manufacture could void the user’s

authority to operate this equipment.

USERS MANUAL OF THE END PRODUCT:

In the user’s manual of the end product, the end user has to be informed to keep at least 20cm

separation with the antenna while this end product is installed and operated. The end user has to be

informed that the IC radio-frequency exposure guidelines for an uncontrolled environment can be

satisfied. The end user has to also be informed that any changes or modifications not expressly

approved by the manufacturer could void the user's authority to operate this equipment. IC statement is

required to be available in the user’s manual: This Class B digital apparatus complies with Canadian

ICES-003. Operation is subject to the following two conditions: (1) this device may not cause harmful

interference and (2) this device must accept any interference received, including interference that may

cause undesired operation.