Senao Networks OAP8250AG Users Manual

OAP8250AG/OAP8251AG

Installation Guide

Outdoor Enterprise AP

V. 0.4

PRODUCT DESCRIPTION

OAP8250AG is Senao new generation of outdoor Enterprise AP with 4x4

MU-MIMO technology implement. It is using Qualcomm total solution to provide

the maximum throughput on the WIFI.

OAP8250AG is internal antenna model.

OAP8251AG is external antenna model.

Any installation to OAP8250AG applies to both models.

▌PACKAGE CONTENT

! OAP8250AG or OAP8251AG Access Point

! OAP8250AG/OAP8251AG Quick Start Guidet

! Mounting Bracket

! PoE injector

! Mounting Kit Package (includes hex cap screws, washers, wall anchors and bolts,

ring clamp)

! Ground Cables

! Packaged Ground Screw

! Pole Mounting Bracket

! 5GHz Omni-directional antennas

! 2.4GHz Omni-directional antennas

▌CONNECT TO THE OAP8250AG/OAP8251AG ACCESS POINT

1. Attach and gently tighten the provided antennas to the appropriate port on the

OAP8251AG

2. Use the M4 ground screw assembly with the wave washer, to attach the ground wire’s

ring terminal to the AP. The wire should be as close to the AP bottom as possible.

3. Power is provided through Power over Ethernet based on 802.3at (PoE+) compliant switch

or PoE+ injector.