Senao Networks OAP7250AG User Manual

Quick Installation Guide

OAP7250AG

Wireless 450M + 1.3Gbps Long Range outdoor Dual Band Concurrent
AP

Please verify contents of the box before continuing to set up the OAP7250AG.

 OAP7250AG Access Point
 OAP7250AG Quick Start Guide
 Mounting Bracket
 PoE injector
 Mounting Kit Package (includes hex cap screws, washers, wall anchors and bolts, ring clamp)
 Ground Cables
 Packaged Ground Screw
 Power Adapter
 Pole Mounting Bracket
 7dBi 5GHz Omni-directional antennas
 5dBi 2.4GHz Omni-directional antennas

Connect to the OAP7250AG Access Point

1. Attach and gently tighten the provided antennas to the appropriate port on the OAP7250AG

2. Attach one of the supplied Ground Cables to the Ground screw on the PoE injector.

3. Attach the wire end the Ground Cable to a safety ground.

4. Using one of the CAT5e/CAT6 Ethernet cable, connect one end of the cable to the LAN1 Port (PoE

Input) of the CAP7250AG and the other end into the AP/Bridge port on the PoE injector.

5. Connect the second CAT5e/CAT6 Ethernet cable to the Switch/Computer Ethernet port.

6. Connect the Power adapter to the DC IN port of the PoE injector and plug the other end into an

electrical outlet.

1

Note: The OAP7250AG can be powered through the LAN1 Port (PoE Input) by any PSE (Power Sourcing
Equipment) which supports IEEE802.11at (PoE+) including the provided PoE injector. With adequate input
power, the OAP7250AG can power a device connected to the LAN2 Port (PSE Output).

IP address configuration

2

1. Ensure that TCP/IP is set to On or Enable open Network Connections and then click Local Area

Connection. Select TCP/IPv4 and then click on the Properties button.

2. If your PC is already on a network, ensure that you have set it to a Static IP Address on the interface

(Example 192.168.1.10 and the Subnet Mask as 255.255.255.0)

Access the OAP7250AG

1. To configure the OAP7250AG, open a web browser and enter 192.168.1.1 in the address bar. Then hit

enter.

2. A login screen will appear. The default username and password of the OAP7250AG is admin. Please

enter the username and password and the click Login.

3