Senao Co IS30V122 Users Manual

WSR-3018
Wireless 11g Broadband Router
User’s Guide
FCC Caution
1. The device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
2. FCC RF Radiation Exposure Statement: The equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
3. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
4. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residen­tial installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Important Safety Precautions
Always read and follow these basic safety precautions carefully when handling any piece of electronic component.
1. Keep this User’s Guide for future reference.
2. Keep this equipment away from humidity.
3. Lay this equipment on a reliable flat surface before setting it up.
4. The openings on the enclosure are for air convection hence protects the equipment from overheating.
5. All cautions and warnings on the equipment should be noted.
6. Never pour any liquid into the opening that could damage or cause electrical shock.
7. If any of the following situations arises, get the equipment checked by a service personnel:
Liquid has penetrated into the equipment
The equipment has been exposed to moisture
The equipment has not work well or you can not get it work
according to User’s Manual
The equipment has dropped and damaged
If the equipment has obvious sign of breakage
8. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT UNCONDITIONED, STORAGE TEMPERATURE ABOVE 60O C OR BELOW -20OC, IT MAY DAMAGE THE EQUIPMENT.
How to Use This Guide
This User’s Guide provides instructions and illustrations on how to install and use your WSR-3018 - the Wireless 11g Broadband Router.
Chapter 1, Introduction, provides a general information on the product you
bought, including its application, specification, and requirements.
Chapter 2, Hardware Installation, tells you how to install the product into
your system.
Chapter 3, Configuration, describes the Configuration Utility that lets you
configure your product to connect the network quickly and easily.
Appendix, includes the instructions of assigning a fixed IP address and
resuming the firmware.
Please note that the setting diagrams or values in this guide are FOR YOUR REFER- ENCE ONLY. The actual settings and values depend on your system and network. If you are not sure about these information, please ask your network administrator or MIS staff for help.
Technical Support
Visit the MSI website for FAQ, technical guide, driver and software updates,
and other information: http://www.msi.com.tw/.
Contact our technical staff at: support@msi.com.tw.
Table of Contents
1. Introduction ......................................................................................................... 1
1.1 WSR-3018 - Wireless 11g Residential Gateway ....................................... 1
1.2 Networking Options ....................................................................................... 2
1.3 Features and Benefits ..................................................................................... 3
1.4 Package Contents ............................................................................................ 4
1.5 System Requirements ..................................................................................... 4
1.6 Specifications .................................................................................................. 5
2. Hardware Installation ......................................................................................... 8
2.1 Product View .................................................................................................. 8
2.2 Connections Ports .......................................................................................... 9
2.3 LEDs ............................................................................................................... 10
2.4 Installing Your WSR-3018 .................................................................................11
2.4.1 Positioning .............................................................................................. 11
2.4.2 Connecting Cables .................................................................................. 11
2.4.3 To Power Up .......................................................................................... 12
3. Configuration ...................................................................................................... 13
3.1 Configuration Utility ...................................................................................... 13
3.2 Typical Configuration.....................................................................................15
3.3 Customized Configuration .............................................................................. 19
3.3.1 System ....................................................................................................20
3.3.2 Internet ................................................................................................... 22
3.3.3 LAN ........................................................................................................ 24
3.3.4 Wireless .................................................................................................. 26
3.3.5 NAT........................................................................................................28
3.3.6 Firewall ................................................................................................... 29
Appendix .................................................................................................................... 31
A - Assigning a Fixed IP Address .......................................................................... 31
B - Resuming the Previous Firmware .................................................................... 35
Introduction
>>> 1.1 WSR-3018 - Wireless 11g
Broadband Router
WSR-3018 Wireless Broadband Router (hereafter called
WSR-3018), compliant with IEEE802.11g and IEEE802.11b, is designed for high throughput and fully function that leads you into the wireless network environment. In the rapid growing network environment, WSR-3018 acts as a home-end device that connects your computer to the WAN service (e.g. the Internet). With the WSR-3018, networking and sharing informa­tion throughout the house/office become an easy and flexible task. In addition, the WSR-3018 is also a switching device as an aggregating point of the wireless LAN and wired LAN clients, and as a router between LAN and WAN traffic.
Combined the SPI firewall, wireless Access Point and LAN switch into a compact package, WSR-3018 can provide you with the essential security and IP sharing function. These fea­tures build the WSR-3018 as a cutting-edge, cost-effective device that fits to SOHO/home application.
1
>>> 1.2 Networking Options
WSR-3018 is a Base Station that bridges communication between computers (via wireless networking), and connects the computers to the Internet.
You can use the WSR-3018 in the following applications:
Home connectivity
A stand-alone wireless network. As shown in the right part of the diagram below ( ), the out-of-the-box mode of operation for the WSR-3018 that allows your client stations to share files and printers. Adding wireless computers is as easy as inserting a wireless client adapter and configuring the computer with the same Network Name and Key.
Broadband access
A wireless/wired Internet access via xDSL/Cable Modem or Ethernet ( ). To access the Internet via a xDSL/Cable or ISDN modem, you will need to:
- Connect the external modem to the WSR-3018 using a LAN cable.
- An ISP (Internet Service Provider) account.
Typical Configuration of Wireless LAN
2
>>> 1.3 Features and Benefits
With WSR-3018, your network can immediately upgrade to a wireless network, providing wireless access to the LAN and WLAN, and sharing information and printers in the network.
54 Mbps Data Rate (max.)/150-400 ft. Indoor Range
The WSR-3018 runs with data-intensive applications like MP3, multimedia, gaming and streaming video/audio - even through walls, floors and ceilings. You can get Ethernet quality net­working without wires and cables - ideal for standard network­ing requirements.
Superior Antenna Design
Dual dipole antennas provide superior polarized reception and diversity transmission for the best signal quality.
Interoperable with any 802.11g Compliant Device
The WSR-3018 complies with IEEE 802.11g standard and Wi-Fi, allowing full interoperability with any Wi-Fi certified wireless product.
Easy to Install and Use
The Configuration Utility with user-friendly and Web-based interface provides step-by-step instructions, making the WSR-3018 fast and easy to be installed and used in the network.
WEP Security to Ensure Privacy
Supports 64-/128-bit WEP encryption, which ensures that your network signal is secure and private inband and outband of your home and office.
Scalability
The WSR-3018 can be configured in every way to meet your needs of specific applications and installations. It also pro­vides Flash memory for easy firmware upgrade.
3
>>> 1.4 Package Contents
Unpack the package and check all the items carefully. If any item contained is damaged or missing, please contact your local dealer immediately. Also, keep the box and packing materials in case you need to ship the unit in the future. The package should contain the following items:
- One Wireless 11g Residential Gateway - WSR-3018.
- One AC Power Adapter, 12VDC/1A output.
- One Ethernet cable (RJ-45).
- One Quick Start Guide.
- One CD-ROM including manual files.
>>> 1.5 System Requirements
After installing the WSR-3018, you need the followings to con­figure respective network settings:
- A network-enabled computer.
- Windows 98SE/ME/2000/XP; Linux; Macintosh.
- A JavaScript-enabled web browser, such as Internet
Explorer 5.0 and Netscape 6.0.
4
>>> 1.6 Specifications
General
Performance
Standard Compliance - IEEE802.11g/IEEE802.11b/
IEEE802.3/IEEE802.3u
Internet Protocol TCP/IP, NAT, DHCP, HTTP, Supported PPPoE, PPTP, DNS, LPR,
SNTP
Operating Temperature 0 ~ 55OC (32 ~ 122OF)
Storage Temperature -30 ~ 70OC (-22 ~ 158OF)
Operating Humidity 0 ~ 85% @ 40OC (104OF),
non-condensing
Wired Data Rates 10/100Mbps auto-negotiating
(full-duplexing switch)
Wireless Data Rates IEEE802.11b (auto-fallback)
- CCK: 11, 5.5Mbps
- DQPSK: 2Mbps
- DBPSK: 1Mbps IEEE802.11g (auto-fallback)
- OFDM: 54, 48, 36, 24, 18, 12, 9, and 6Mbps
Frequency 2.4 ~ 2.4835 GHz
Channel 14 channels
Wireless Range Open Space:
- 170m @ 11Mbps
- 50m @ 54Mbps
Indoor:
- 120m @ 11Mbps
- 20m @ 54Mbps
5
Wireless Transmission 17±1dBm Power
LAN
Number of Ports Four 10/100Mbps switched
Ethernet ports (RJ-45)
Number of PCs Up to 253 PCs Supported
Routing NAT, TCP/IP
Number of Ports One 10/100Mbps Fast
WA N
Ethernet port for cable/xDSL modem (RJ-45)
Firewall - IP/Port Address Forwarding
Filtering
- MAC Address Forwarding Filtering
- MAC Address Associating Filtering
- DoS Prevention
- Application Layer Gateway
- Virtual DMZ
- SPI
Physical
Specification
Dimensions (WxDxH) 180 x 127.7 x 32mm
Weight 295g
Antenna
Form factor Dipole type with dual external
antenna
Requirement Peak Gain = 2dBi
Average Gain = 1.08dBi (@ 2.45GHz, H-Plan)
Input Voltage 12VDC (includes AC adapter)
6
Device
Management
Tools Web-based browser; event
log; login password
LEDs Power, LAN/WAN/WLAN
port activity
Certifications
U.S. FCC Part 15 class B, Wi-Fi
Europe CE
7
Loading...
+ 28 hidden pages