CL6
USER’S GUIDE
Table of Contents:
Introduction ............................... 2
Overview .................................... 3
Precautions ................................4
Replacing the Battery in
the Power Supply.....................5
Specifications ...........................6
CL6 Connector and Kit
Option..........................................7
Warranty .....................................8
Thank you for choosing Senal.
The Senal CL6 is a broadcast-quality, omnidirectional lavalier microphone ideal for TV, film, and stage
applications. The CL6 is designed with a twisted pair cable that is packed with nylon yarn and
protected with a high-density spiral shield. This cable design, combined with a durable and compact
capsule housing, delivers ultra-low handling noise. With a head diameter of only 4 mm, the CL6 is easy
to conceal in wardrobes or props for onscreen and onstage use. The omnidirectional polar pattern
captures a natural sound with minimal sensitivity to head turns, allowing flexible positioning for
recordings, broadcasts, and presentations. Included windscreens and a variety of clips provide a
host of options for placement. The frequency response is tailored for use outside or underneath light
clothing. Designed to connect to a wireless body pack, the CL6 can also be combined with the Senal
PS-48B Power Supply to operate on phantom or battery power, affording compatibility with any XLR
microphone input.
▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪
2
Introduction
Overview
Lavalier microphone
Single tie-clip
Double tie-clip
Cable clip
Magnetic clip with lanyard
Viper clip
Two (2) windscreens
PS-48B Power Supply
available separately and
in select kits
▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪
Overview
3
Precautions
▪ Please read and follow these instructions and keep this manual in a safe place.
▪ Keep this product away from water and all flammable gases or liquids.
▪ Do not attempt to disassemble or repair this product.
▪ Handle this product with care.
▪ Clean this product with only a soft, dry cloth.
▪ Make sure that this product is intact and that there are no missing parts.
▪ All photos are for illustrative purposes only.
▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪
4
Precautions
Replacing the Battery in the Power Supply
The Senal PS-48B Power Supply runs on an LR44 battery. To replace the battery,
follow these instructions:
1. Open the battery compartment cover from the notch at the base of the
microphone.
2. Rotate and open the battery compartment as shown by the arrow on the
power supply.
3. Remove the old battery if necessary and insert a fresh battery in the orientation
indicated on the battery compartment.
4. Close the battery compartment and lock it by rotating it in the opposite direction
of the arrow on the power supply.
OPEN
Replacing the Battery in the Power Supply
▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪
5
Specifications
Transducer:
Polar pattern:
Back Electret Condenser
Omnidirectional
Frequency response: 20 Hz to 20 kHz
Sensitivity:
Impedance:
Signal-to-noise ratio:
Maximum input sound level:
Operating voltage:
Housing material:
Weight:
Head dimensions:
Cable diameter:
▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪
6
-53 dB ±3 dB (0 dB = 1 V/μbar @ 1 kHz)
2,000 Ω ±30% @ 1 kHz
24 dB(A)
120 dB
1 to 10 V DC
Brass
0.4 oz. (11.3 g)
0.33″ × 0.16″ (8.37 × 4 mm)
0.05″ (1.27 mm)
Specifications
CL6 Connector and Kit Options
The CL6 is available with the following connector and kit options:
▪ CL6-3.5H Lavalier Microphone with 3.5 mm Connector for Sennheiser Evolution series
▪ CL6-3.5N Lavalier Microphone with 3.5 mm Connector for Sony UWP series
▪ CL6-TA4 Lavalier Microphone with TA4 Connector for Shure transmitters
▪ CL6-TA5 Lavalier Microphone with TA5 Connector for Lectrosonics transmitters
▪ CL6-HRS Lavalier Microphone with 4-pin Hirose Connector for Audio-Technica transmitters
▪ CL6-3.5H-P Lavalier Microphone with 3.5 mm Connector for Sennheiser with Senal PS-48B
Power Supply
▪ CL6-3.5N-P Lavalier Microphone with 3.5 mm Connector for Sony with Senal PS-48B Power Supply
▪ CL6-TA4-P Lavalier Microphone with TA4 Connector for Shure transmitters with Senal PS-48B
Power Supply
▪ CL6-TA5-P Lavalier Microphone with TA5 Connector for Lectrosonics transmitters with Senal
PS-48B Power Supply
▪ CL6-HRS-P Lavalier Microphone with 4-pin Hirose Connector for Audio-Technica transmitters with
Senal PS-48B Power Supply
CL6 Connector and Kit Options
▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪
7
One-Year Limited Warranty
Senal provides a limited warranty to the original purchaser that this product is free from defects in materials
and workmanship under normal consumer use for a period of one (1) year from the original purchase date or
thirty (30) days after replacement, whichever occurs later. Senal’s responsibility with respect to this limited
warranty shall be limited solely to repair or replacement, at Senal’s discretion, of any product that fails during
normal consumer use. Inoperability of the product or part(s) shall be determined by Senal. If the product has
been discontinued, we reserve the right to replace it with a model of equivalent quality and function.
To obtain warranty coverage, contact Senal to obtain a return merchandise authorization (“RMA”) number,
and return the defective product to Senal, along with the RMA number and proof of purchase. Shipment of
the defective product is at the purchaser’s own risk.
This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse,
improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, SENAL MAKES NEITHER ANY
EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you
with specific legal rights, and you may also have additional rights that vary from state to state.
© Copyright 2013 Gradus Group
All other trademarks are the property of their respective owners.
All photos are for illustrative purposes only.
www.senalsound.com
Loading...