SEMAK HOT DOG COOKER & SPIKER – MODEL HD4S
OPERATION AND WARRANTY BOOKLET
SEMAK AUSTRALIA: FACTORY 18, 87-91 HALLAM SOUTH ROAD, HALLAM VIC 3803
PH 03 9796 4583 FAX 03 9796 4586 WEB WWW.SEMAK.COM.AU
Table of Contents
General Safety Instructions for All Semak Products ..................................................... 4
Safety Instructions ........................................................................................................ 5
Parts of the Hot Dog Cooker ......................................................................................... 5
Operating Instructions for the Semak Hot Dog Cooker & Bun Spiker ........................... 5
Cleaning Instructions for the Semak Hot Dog Cooker & Bun Spiker ............................. 7
Spare Parts for the Semak Hot Dog Cooker and Bun Spiker ......................................... 7
Service & Maintenance ................................................................................................ 7
Electrical Compliance ................................................................................................... 8
Specifications ............................................................................................................... 8
Warranty ...................................................................................................................... 8
WARRANTY REGISTRATION ........................................................................................ 10
Page | 2
RETAIN THESE SAFETY INSTRUCTIONS
Page | 3
General Safety Instructions for All Semak Products
Do not use the appliance for other than its intended use.
Never leave the appliance unattended when in use.
The appliance should not be used by children or infirm persons and close
supervision is necessary when used near such persons.
Always switch off at power outlet before removing the plug. Remove by holding
the plug – do not pull the cord.
When the appliance is not in use, or prior to cleaning, always switch off the
power and remove the plug.
To avoid the risk of electric shock, do not immerse the plug, cord or any part of
the appliance in water or any other liquid.
Do not use near a stove or heat source and do not let the cord come in contact
with any hot surface.
Do not use the appliance with an extension cord unless that cord has been
checked and tested by a qualified technician or if it is an extension cord that has
been manufactured by a reliable electrical goods manufacturer and has not
been altered in any way.
Do not operate any appliance with a damaged cord or plug, or after the
appliance malfunctions or has been dropped or damaged in anyway. Return to
Semak or an authorised service agent for repair.
CAUTION Hot Surfaces.
NEVER leave the appliance ON unattended.
ALWAYS unplug the cooker after use.
Page | 4
1.
1. Bun Spikes
2. Hot Dog Basket
3. Spike ON/OFF Switch
4. Spike Heat Adjustment Knob
5. Cooker Indicator Lamp
6. Heat Adjustment Knob
7. Cooker ON/OFF Switch
Safety Instructions
1.
2.
3. 4. 5. 6. 7.
Only use the appliance on a flat, level and stable surface.
DO NOT use on a wet surface.
When in operation the surfaces of the bun spiker & glass tank are EXTREMLY HOT.
DO NOT touch the Teflon coated bun spikes while the appliance is in operation.
ALWAYS turn off the appliance and allow it to cool down before cleaning.
The spikes remain hot for some time. Allow a minimum 15 minutes COOL DOWN
to ensure that the bun spikes have cooled. NEVER pick up the bun spiker by the
spikes to avoid burns of the hands, fingers, wrists.
Use a barely damp cloth to wipe the bun spiker once it has cooled.
DO NOT use running water when cleaning the bun spiker. Wipe the exterior with a
damp cloth.
DO NOT use caustic substances to clean the appliance and do not allow caustic
substances to make contact with any electrical components of the warmer.
Parts of the Hot Dog Cooker
Page | 5
Operating Instructions for the Semak Hot Dog Cooker & Bun Spiker
OFF
NO HEAT
LOW
25% HEAT
MED
50% HEAT
HIGH
75% HEAT
FULL
100% HEAT
OFF
FULL
HIGH
MED
LOW
• Make sure that the Switches 3 & 7 are in the “OFF” position.
• Before first use, fill the water tray up to 1/4 with water and attach the glass
cylinder with the round wire mesh
• Plug into an earthed 240V AC power supply.
• Turn on the device with the use of the ON/OFF (7) switch. The green indicator
lamp lights up.
• After the device has warmed up, place the sausages in the glass cylinder. Set
the lid on top of the glass cylinder.
• Set temperature control to highest power level in order to heat up the water,
the control lamp will light up.
• Shortly afterwards, turn back the temperature control and adjust to the desired
temperature. The heating indicator lamp (5) goes out as soon as the set
temperature has been reached.
• Temperature Control Settings
• Use the dial to lower the temperature to keep sausages warm after they have
been cooked.
• Foodstuffs should be maintained at 60ºC to prevent bacterial spoiling. (The
• When finished cooking turn the knob to the “Off” position.
• To use the bun spiker turn the spikes on. Allow to warm. When the light turns
failure to meet proper food-handling standards may result in food poisoning
and prosecution.) Care should be taken to ensure that the food has reached the
correct temperature on the inside.
off the spikes are ready to use. Use caution when spiking rolls that hands do not
come in contact with the spikes as burns are a potential risk.
Page | 6
Cleaning Instructions for the Semak Hot Dog Cooker & Bun Spiker
ALWAYS turn off the appliance and allow it to cool down before cleaning.
Use a barely damp cloth to wipe the machine once it has cooled.
Due to hygienic reasons the water tray must be cleaned twice a day!
Adverse water conditions and salts, grease and spices dripping from the sausages
form aggressive water compositions that might even corrode metals.
Due to the reasons mentioned above the water bowl must be decalcified at least
once a day as otherwise pitting corrosion at the bowl may be the consequence.
For that purpose, just use a descaler or a water-vinegar-solution.
DO NOT use caustic substances to clean the cooker and do not allow caustic
substances to make contact with any electrical components of the cooker.
Ensure that all parts of the cooker are properly dried before replacing them in the
appliance.
Spare Parts for the Semak Hot Dog Cooker and Bun Spiker
Spare Parts, exploded views and wiring diagrams are available from our webpage. Go
to www.semak.com.au and locate the appliance in the product section for the above
information.
Service & Maintenance
The Semak Hot Dog Cooker does not contain user-serviceable parts. For Service and
Repair, contact Semak for your nearest Authorised Service Agent
The Foodservice Industry is deemed a hostile environment within the scope of
AS/NZS 3760:2003. Semak Hot Dog Cooker and Bun Warmer MUST be routinely
electrically tested for compliance with this standard if used commercially.
It is recommended that a Food Safety program such as HACCP be employed and that
routine service and repair be undertaken at the time of electrical testing to ensure
the correct operation and function of all parts.
Page | 7
Electrical Compliance
Model
HD4S
Dimensions
L530 x W340 x H410mm
Volts
240V AC 10AMP
Electrical
600W
Semak Hot Dog Cooker & Bun Warmers comply with the following electrical
standards
CISPR 14
Specifications
Warranty
The Semak Hot Dog Cooker and Bun Warmer is a Commercial appliance. This product
is guaranteed for 1 Year* from the date of purchase against mechanical and electrical
defects. If the fault is deemed caused by MISUSE/ABUSE the terms of the warranty
are invalidated. If the product has been opened or tampered with (i.e. In an attempt
to repair it) the warranty is invalidated. All warranty repairs should be undertaken by
Semak Australia.
It is against company policy to authorize warranty repairs over the phone. Service
Agents will require a work order number from Semak to conduct warranty repairs.
*Warranty excludes, Elements and Teflon Coating
Page | 8
SEMAK WARRANTY
THIS WARRANTY APPLIES ONLY TO PRODUCTS MANUFACTURED AND SOLD IN AUSTRALIA
The benefits conferred by this warranty are an alternative to all other rights and remedies
in respect of the product which the consumer has under the Trade Practices Act and similar
State and Territory Laws.
Semak Australia. Warrant each new SEMAK appliance manufactured by SEMAK to be free
from defects in materials or manufacturing process for a period of 2 years from the date of
original purchase.
Should defects due to faulty materials or manufacturing process develop within the
warranty period, the appliance will be repaired without charge providing all conditions of
this warranty are observed.
1. Proof of Purchase and Warranty card must be retained and available on request.
2. This Warranty is void if the equipment has been damaged due to misuses neglect or is
used for a purpose for which it was not suited; and no repairs, alterations or
modifications have been attempted by other than Semak or its authorised Service
Agent.
3. Semak Australia. Reserves the right to reject a claim for warranty if service is required
due to misapplication, improper installation, inadequate wiring, and incorrect voltage
conditions. Under no circumstances shall SEMAK or its agents bear responsibility for
consequential damages of any kind.
4. Where required by Statute or local authority, equipment must be installed by qualified
person in accordance with all relevant regulations. Failure to do this will void product
warranty.
5. Cost of transport of any appliance or part to and from SEMAK or its Service Agent is to
be paid by the owner.
6. A charge will be made where failure is due to neglect, abuse or accidental damage on
the part of the operator, or when no fault can be found or the fault is due to causes
outside the control of Semak Australia.
7. The above does not preclude the purchaser from their Statutory rights as a consumer.
Semak Australia
Factory 18
87-91 Hallam South Road
HALLAM VIC 3803
Ph 03 9796 4583
Fax 03 9796 4586
Email technical@semak.com.au
Page | 9
WARRANTY REGISTRATION
Retain for Future Reference
DO NOT SEND
Please complete one registration for each Semak appliance.
You may be required to provide this information when requesting after sales service. Please
staple your proof of purchase to this page.
Company Name: ________________________________________________
Company Address: ________________________________________________
Business Type: ________________________________________________
Contact: ________________________________________________
Phone: ________________________________________________
Fax: ________________________________________________
Email: ________________________________________________
Product: ________________________________________________
Serial Number: ________________________________________________
Date of Purchase: ________________________________________________
Place of Purchase: ________________________________________________
Page | 10
Page | 11
© Semak 2014
Page | 12
Loading...