Page 1
Website: www.semaudiolabs.com
Email: info@semaudiolabs.com
QUICK START GUIDE
DRAGON: iP-100
Page 2
CONTENTS:
x7
SET UP:
Welcome to the S.E.M. Audio Laboratories community. Thank you for selecting one of our
milestones and embracing a lifestyle choice of quality and design. This quick start guide will
get you up and running quickly. For more information about this and other products, please
refer to the extended guide or visit www.semaudiolabs.com.
The following items can be found inside your product gift box.
- Main unit - Remote Control - iPod Docking Cavity - Power Adaptor
Follow the below steps to get started.
- UNIT:
Plug the tail end of the adapter into the DC-Jack (socket) on the side of the unit. Insert the plug of the AC-adaptor
into the wall AC-socket.
This unit is designed to be “On” or in “Standby Mode” at all times. During standby, the unit focuses on being
environmentally friendly through minimal electricity usage and consumes less the 2W of power.
- REMOTE:
The remote comes with a battery built-in from the get-go. Gently pull out the plastic ‘Tab’ from the battery
compartment at the rear of the remote to begin wireless communication between the remote and unit.
- iPod:
Unwrap the iPod dock to connect the cord to the main unit (Docking socket).
SET CLOCK TIME:
It is important to first set the clock time, which shall be essential when utilizing the alarm timer feature.
To set the time, switch the unit to “Standby” mode (display light dimmed).
Press and hold the ‘Clock Adj.’ key to access clock settings.
Use the navigational, ‘Next/Back’, keys to select clock settings and the ‘Clock Adj.’ to confirm selection.
Clock Adj.
Standby
Page 3
- iPod VIDEO-OUT:
This unit is capable of composite Video-out from the docked iPod.
Simply connect a composite Video-out to Composite video-out wire,
with one end into the unit jack and the other in the respective external
display composite video-in jack.
- TIMER SETTING:
This unit’s On/Off timer is of great use as a morning alarm.
Press and hold the ‘Timer’ key until the symbol is viewable on the LCD display.
Use the navigational, ‘Next/Back’, keys to select the timer on/off settings and the ‘Timer’ key to confirm selection.
You can have playback of your favorite song from USB/SD/Tuner/iPod sources for your morning alarm.
KEY CONTROLS:
- USB / SD:
For playback from USB or SD-Card MP3 files, insert the respective media device into the designated USB or SD card slot.
Once the media device is inserted into the correct slot, press the function key until the LCD display shows “USB/SD” mode.
Playback from the USB/SD media device should begin automatically, whilst the ‘Play/Pause’, ‘Next/Back’ and
‘Folder+ / Folder-‘ keys can be used to navigate the tracks on the USB/SD and control playback.
*For extended details and additional functions, please refer to the instruction manual accompanied with the unit.
iPod:
Connect and Turn on both the unit and the iPod.
Use the Play/Pause, Next and Previous keys to control playback from the iPod
Use the menu key to navigate the available iPod menu's (such as playlist, artist song, video or others depending on
your iPod). Use the “navigational” key's to scroll within menu's and submenu's. Then press the 'enter' key to confirm
highlighted selection.
Clock Adj.
Play/Pause
Back Next
Folder -
Folder +
USB-DRIVE
SD-CARD
iPod Video Output
Page 4
Loading...