Selmo SMART PLUS PROGRAM User Manual

Selmo

Comfort technology division

“SMART Plus Program ”

Electronic control for towel heaters

SMART PLUS PROGRAM is an electronic clock
thermostat for electric towel heaters based on fluid heat
transfer.SMART PLUS PROGRAM controls the room
temperature by means of an external sensor.

The series has the heating element attached toSMART
the thermostat.
The symmetry of the device enables both right and left
side coupling to the towel heater. The device is supplied
with a dedicated remote control that can be used for
defining a weekly program configurable for each day of
the week. The remote control is provided with a bracket
for anchoring it to a wall or to the towel heater

Twelve different types
of electric resistance
are available, from
100W to 1000W. The
device is available in
white and chromed
colours, and it can even be mounted on towel heaters with
mixed operation.

Operative modes:

Comfort, Night, Antifreeze, Chrono, Boost 2h, ECO ,,ASC
Open window detection, Fil-Pilote, Key lock.

Available colours:

- White

- Chromed

SMART Program is a certified product:

SMART Program is compliant to the following standards:

- (<0,5W).Eco-design Directive for Energy-using Products, 2005/32/EC

- (<0,5W).Eco-design Directive for Energy-using Products, 2005/32/EC

-EN 60335-1:2012+A11:2014 -EN 60335-2-30:2009+A11:2012

-EN 60335-2-43:2003+A1:2006+A2:2008

-EN 61000-3-2:2014 -EN61000-3-3:2013 -EN 62233:2008

-EN 55014-1:2006+A1:2009+A2:2011 -EN 55014-2:1997+A1:2001+A2:2008

Page 1

Selmo Electronic

Selmo Electronic

Via Pacinotti, 24 - 35030 Rubano www.selmo.it(PD) Italy- Tel [phone], Fax [phone] -

Via Pacinotti, 24 - 35030 Rubano www.selmo.it(PD) Italy- Tel [phone], Fax [phone] -

Release 02 - June 2018

ENG

Product Electronic control for electric towel radiators
Applications Towel radiators

Insulation class

Class I, Class II

IP level IP44
Maximum power See table below
Supply voltage 230VAC 50Hz

Size

See picture below

Warranty 2 years

Standards

-EN 60335-1:2012+A11:2014 -EN 60335-2-30:2009+A11:2012

-EN 60335-2-43:2003+A1:2006+A2:2008

-EN 61000-3-2:2014 -EN61000-3-3:2013 -EN 62233:2008

-EN 55014-1:2006+A1:2009+A2:2011

-EN 55014-2:1997+A1:2001+A2:2008

Approval mark CE
Case ABS+PS-VO

Environmental directives

WEEE, RoHS

Operative modes Comfort, Night, Antifreeze, Stand-by, Chrono, Boost 2h,

ECO,ASC,Open window detection, Key lock

Thermostat status light
indicators

Mode LED (red, green, amber)
On/Stand-by LED (red, green, amber)

Connection to mains 3 cables (neutral, ea rth, live); 2 cables (live, neutral);

3 cables (live, neutral, Fil-Pilote); Swiss, UK, Italian plugs;
Schuko plug;

Available colours

White (RAL 9016); Chrome.

Power (W) 100 200 250

300 400 500 600 700

750 800 900 1000

Length

(Heating element) class II

(mm)

350 350 350 350 370 410 465 520 560

600 670

730

Length

(Heating element) class I

(mm)

350 350 370

370

430

450 560 630

700

700 760

830

Selmo

“SMART Plus Program ”

Electronic control for towel heaters

Comfort technology division

Selmo Electronic

Selmo Electronic

Via Pacinotti, 24 - 35030 Rubano www.selmo.it(PD) Italy- Tel [phone], Fax [phone] -

Via Pacinotti, 24 - 35030 Rubano www.selmo.it(PD) Italy- Tel [phone], Fax [phone] -

Heating

Page 2

white

Release 02 - June 2018

ENG

Product Remote control for electro nic control

App lications Smart Plus Program thermostat

Colour White

Display LCD

Keyboard 7 keys

Temperature selection Digital

Operational mode
selection

Digital

Selectable operational
modes and functions

Comfort, Night, Antifreeze, Stand-by, Chrono, Boost
2h, ECO,ASC, Open window detection, Key lock

Selectable temperature range 10°C ÷ 32°C - 7°C in Antifreeze mode.

Operative
temperature range

-10°C ÷ +40°C

Battery 2 x 1,5V - AAA type

Signal transmission

Infrared (2 transmitters)

Size 100x42x27mm(HxLxW)

Anchoring Wall anchoring through dedicated bracket.

Warranty 2 years

Selmo

“SMART Plus Program ”

Electronic control for towel heaters

Comfort technology division

Selmo Electronic

Selmo Electronic

Via Pacinotti, 24 - 35030 Rubano www.selmo.it(PD) Italy- Tel [phone], Fax [phone] -

Via Pacinotti, 24 - 35030 Rubano www.selmo.it(PD) Italy- Tel [phone], Fax [phone] -

Page 3

Release 02 - June 2018

ENG

Selmo

Comfort technology division

“SMART Plus Program ”

Electronic control for towel heaters

WARNING

RISK OF ELECTRIC SHOCK!

Disconnect power supply before proceeding with installation.

•Preserve with care the present instruction sheet and read carefully before using the

device.

• The present device has been designed for exclusive use on a towel radiator.

•The thermostat is designed for heating the liquid contained inside a towel radiator in
combination with a heating element. Any other use is forbidden.

• Before using, carefully ensure that the line voltage is the same as that specified for

the device (see technical specifications).

• Only use heating elements compatible with the type of used towel radiator.

• Disconnect power supply before cleaning or before performing maintenance of the

product.

In case of damage of the power supply cable shut down the device and do not
tamper with it. The damaged power supply cables can be replaced exclusively by
the manufacturer or by an authorized service center. Failure to comply with the
above rules could lead to compromised system safety and void the warranty.

• Store and transport the heating element exclusively in the protecting packaging.

• Replacement of the heating element can be done exclusively by the product

manufacturer.

• Children aged under 8 years old and people with reduced physical, sensory or

mental abilities, can use the device only under supervision. Children should not
play with the device.

Cleaning and maintenance meant to be carried out by the user should not be

done by children without supervision.

Page 4

Selmo Electronic

Selmo Electronic

Via Pacinotti, 24 - 35030 Rubano www.selmo.it(PD) Italy- Tel [phone], Fax [phone] -

Via Pacinotti, 24 - 35030 Rubano www.selmo.it(PD) Italy- Tel [phone], Fax [phone] -

Release 02 - June 2018

ENG

Selmo

Comfort technology division

“SMART Plus Program ”

Electronic control for towel heaters

Installation guide For authorized installer only

•Disconnect the device from power supply before proceeding with installation.

•Disconnect the device from power supply before proceeding with installation.

•Protect the device with a 30mA RCD circuit breaker

•Protect the device with a 30mA RCD circuit breaker

1) Insert the heating element in the threaded opening located on the bottom part of the
radiator.

2) Securely fasten the electric resistance to the body of the towel radiator with a 22mm wrench.

3) The special sheath ensures a secure mounting and eventually allows a slight supplemental
torsion to perfectly align the thermostat with the radiator.

4) Tilt the radiator as in fig. 3, making sure that the opening on top of the radiator is located on
the highest side.

WARNING. Do not lean the radiator on the electronic control!

5) Fill the radiator with the specific liquid.

6) Put the radiator back in vertical position and check the internal level of the liquid (fig. 4).

7) Ensure a proper fastening of the heating element in the radiator.

8) Connect the device to mains and start heating (the top opening of the radiator must remain
open!).

9) Set the maximal temperature and check the level of the internal liquid. Due to thermal
expansion the liquid could brim over the radiator.

10) Remove the exceeding liquid (be careful to avoid burns!) in order to keep the thermostat
dry and avoid the liquid reaching the border. When the level of the liquid stops growing wait for
additional 5 minutes then stop heating.

11) If necessary, top up the radiator before the liquid cools down (keep the temperature of the
internal liquid checked all the time).

12) Close the top opening of the radiator with the appropriate cap.

13)Hook the radiator to the wall.

14)Connect the device to the mains. For models having no plug it is necessary to install a
suitable omnipolar disconnection switch ensuring complete disconnection in case of category
III overvoltage (that means a switch with at least 3 mm of space between open contacts).

(3)

(4)

SI

(1)

(2)

Page 5

Selmo Electronic

Selmo Electronic

Via Pacinotti, 24 - 35030 Rubano www.selmo.it(PD) Italy- Tel [phone], Fax [phone] -

Via Pacinotti, 24 - 35030 Rubano www.selmo.it(PD) Italy- Tel [phone], Fax [phone] -

Release 02 - June 2018

NO

ENG

Selmo

Comfort technology division

“SMART Plus Program ”

Electronic control for towel heaters

Connessione al sistema Fil-Pilote

(solo per le versioni provviste di "Fil-Pilote")

Example

Termostat
classe II

FASE NEUTRO

230 Vac

50 Hz

Stazione
"Fil-Pilote"

1.Smart Plus Program with “Fil-Pilote” function (Class II) can be remotely controlled by a
remote control unit supporting the “Fil-Pilote” standard. The brown wire is the Live wire
(L), the grey wire is the Neutral wire (N) and the black wire is used for receiving the Fil­Pilote signal.

Do not connect the black wire to the ground.

1

2.Smart Plus Program without "Fil-Pilote" functionality (Class I) cannot be remotely
controlled. The brown wire is the Live wire (L), the blue wire is the Neutral wire (N) and the
yellow/green wire has to be connected to Earth.

Page 6

Release 02 - June 2018

ENG

Selmo Electronic

Selmo Electronic

Via Pacinotti, 24 - 35030 Rubano www.selmo.it(PD) Italy- Tel [phone], Fax [phone] -

Via Pacinotti, 24 - 35030 Rubano www.selmo.it(PD) Italy- Tel [phone], Fax [phone] -

Anchoring the remote control to the wall

Selmo

“SMART Plus Program ”

Electronic control for towel heaters

Comfort technology division

Bracket for anchoring
to the wall.

Remote control

Screws.

Anchoring pins.

Screw anchors for fixing the
bracket to the wall.

Holes for connecting
the remote control
to the bracket.

Hooks for
anchoring
the bracket
to the screw
anchors.

REMOTE CONTROL CHARACTERISTICS

Batteries
2xAAA 1.5v

Removable plastic case.

Double and
simultaneous
IR transitters.

Page 7

Selmo Electronic

Selmo Electronic

Via Pacinotti, 24 - 35030 Rubano www.selmo.it(PD) Italy- Tel [phone], Fax [phone] -

Via Pacinotti, 24 - 35030 Rubano www.selmo.it(PD) Italy- Tel [phone], Fax [phone] -

Release 02 - June 2018

ENG

Selmo

“SMART Plus Program ”

Electronic control for towel heaters

User Manual

IR receiver

Comfort technology division

"On/Stand-by" LED:

(red/green/amber) it
indicates the status of
the thermostat.

Heating element.

On/Stand-by button

"Mode" LED: red / green

/ amber.
A small light indication
showing the active
function / operating

mode.

1/2" GAS thread
for fastening to
the radiator.

Sonda NTC

Power cord

Page 8

Selmo Electronic

Selmo Electronic

Via Pacinotti, 24 - 35030 Rubano www.selmo.it(PD) Italy- Tel [phone], Fax [phone] -

Via Pacinotti, 24 - 35030 Rubano www.selmo.it(PD) Italy- Tel [phone], Fax [phone] -

Release 02 - June 2018

ENG

Selmo

“SMART Plus Program ”

Electronic control for towel heaters

Comfort technology division

Display button

Display

[ECO] button

Pulsante

[ECO]

Pulsnte

[ + ]

[ + ]

button

Pulsante

[chrono]

[crono]

button

[Boost 2h]

button

ECO

Pulsante

[Mode] button
[Mode]

[On/Stand-by]
button

[ - ] button

Page 9

Selmo Electronic

Selmo Electronic

Via Pacinotti, 24 - 35030 Rubano www.selmo.it(PD) Italy- Tel [phone], Fax [phone] -

Via Pacinotti, 24 - 35030 Rubano www.selmo.it(PD) Italy- Tel [phone], Fax [phone] -

Release 02 - June 2018

ENG

Selmo

Comfort technology division

“SMART Plus Program ”

Electronic control for towel heaters

User guide

User guide

Press the [On/Stand-by] button on the remote control or on the thermostat to turn
on the device or to switch to "Stand-by" mode

NOTES:- When the device goes into “Stand-by” mode it beeps twice for 0.5s.

- When the device is activated it beeps once for 1s
Turning on the device using the button on the thermostat will directly activate the
“Comfort” mode with a default selected temperature of 20°C. It is necessary to use the
remote control for further modifying the temperature or for changing the operating
mode.

Selected temperature

Remote control

ASC function

.transmission indication

"Open Window
Detection" function

Operating mode
indication

Clock

2. Operational modes

Press the key on the remote control to select the desired operating mode. An icon[Mode]
on the display indicates the selected mode. The mode icons are shown in the following
table

“Key lock" icon

"ECO" mode

Current day
of the week

Daily program in
"Chrono" mode

Fil-Pilote

To enter into the following two operating modes, see the dedicated section:

Open Window
Detection

Selmo Electronic

Selmo Electronic

Via Pacinotti, 24 - 35030 Rubano www.selmo.it(PD) Italy- Tel [phone], Fax [phone] -

Via Pacinotti, 24 - 35030 Rubano www.selmo.it(PD) Italy- Tel [phone], Fax [phone] -

Night

Eco

ECO

Comfort

Page 10

Boost 2h

anti-Ice

ASC

Release 02 - June 2018

Crono

ENG

Selmo

Comfort technology division

“SMART Plus Program ”

Electronic control for towel heaters

Comfort Mode

The "Comfort" temperature corresponds to the desired temperature for the
room.

-Press the key until the "Comfort" icon is displayed.[Mode]

-Set the desired temperature using the and keys.[+] [-]
In "Comfort" mode, the “Mode” LED turns red.

Night Mode

The "Night" mode sets a value of temperature to a lower value than the one set
for the "Comfort" temperature.
It is suggested to use this operating mode during the night or when the room is
not occupied for 2 or more hours.

-Press the key until the display shows the " Night" icon.[Mode]

-Set the desired temperature using the and keys.[+] [-]
In "Night" mode, the “Mode” LED turns green.

Antifreeze Mode

In "Antifreeze" mode the device activates the heating element when the room
temperature falls below 7°C. It is suggested to set this operating mode when
the room is not occupied for several days.

-Press the key until the display shows the "Antifreeze" icon.[Mode]
In "Antifreeze" mode, the “Mode” LED blinks green.

Boost 2h Mode

The "Boost 2h" can be used for quickly warming the room.-To activate the
“Boost 2h” mode, press the corresponding key until the "2h" icon is
displayed.To exit this mode, press either the key or the[Boost 2h] [On/Stand-
by] key.
For safety reasons, the temperature will be automatically limited to 32°C.
In “Boost 2h” mode, the “Mode” LED blinks red.

Page 11

Release 02 - June 2018

ENG

Selmo Electronic

Selmo Electronic

Via Pacinotti, 24 - 35030 Rubano www.selmo.it(PD) Italy- Tel [phone], Fax [phone] -

Via Pacinotti, 24 - 35030 Rubano www.selmo.it(PD) Italy- Tel [phone], Fax [phone] -

Selmo

Comfort technology division

“SMART Plus Program ”

Electronic control for towel heaters

Chrono Mode

This operating mode allows the definition of a weekly program configurable for
each day of the week.To enter into this mode, press the key until the[Mode]
display shows the "Chrono" icon.When the Chrono mode is active, the
“On/Stand-by” LED turns amber; the “Mode” LED turns green during the “Night”
period and it turns red during the “Comfort” period.

Configuring the hours sequence:
Press the key to start the programming procedure.[Chrono]

a)Set the time and day of the week.

-The blinking number shows the day of the week: press and keys to set[+] [-]
the correct day, then press to confirm.[Mode]

-Press the and keys to set the hour then press [Mode] to confirm and[+] [-]
proceed with the configuration of the minutes. -For configuring the minutes,
repeat the same procedure and confirm with the key at the end.[Mode]

b)Configuring the weekly program.

The procedure starts automatically from day 1, and requires specifying the
desired temperature (either “Comfort” or “Night”) for each hour of the day. This
is done by pressing for the current hour either the key (for setting the[+]
“Comfort” temperature) or the key (for setting the “Night” temperature). Once[-]
one of the two keys is pressed, the configuration process moves to the
following hour (for a total of 24 steps).
The "Comfort" temperature is represented with a filled rectangle while the
“Night” temperature is represented with an empty space.

Example

Page 12

Selmo Electronic

Selmo Electronic

Via Pacinotti, 24 - 35030 Rubano www.selmo.it(PD) Italy- Tel [phone], Fax [phone] -

Via Pacinotti, 24 - 35030 Rubano www.selmo.it(PD) Italy- Tel [phone], Fax [phone] -

Release 02 - June 2018

Comfort

Night

ENG

Selmo

Comfort technology division

“SMART Plus Program ”

Electronic control for towel heaters

Fil-Pilote Mode (only for models equipped with "Fil-Pilote" feature)

In this mode the device is managed by a remote control unit.

1.Press the key until the corresponding icon is shown on the display.[Mode]

2.Use the and buttons to select the desired temperature.[+] [-]
The remote Fil-Pilote control unit will configure the operational mode. The device operates
with the most advanced “Fil-Pilote” system with six commands, which allows the following
functions

1. Stand-by: power off the heating element, the device remains active.

2. Comfort: maintains the “Comfort” temperature set by the user.

3. Eco: maintains the room temperature 3,5°C below the “Comfort” temperature.

4. Antifreeze: maintains the room temperature at 7°C.

5. Comfort-1: maintains the room temperature 1°C below the “Comfort” temperature.

6. Comfort-2: maintains the room temperature 2°C below the “Comfort” temperature.

NOTE: When this operating mode is activated on models not equipped with the “Fil-Pilote”
feature, the device will operate in “Comfort” mode.

Key lock

This function allows locking the buttons of the device to avoid inadvertent modifications of the
settings.
All the keys are disabled except the button.[On/Stand-by]
Press together the and keys for 3 seconds to activate this mode.[Mode] [+]
To unlock the buttons repeat the procedure.

ECO Mode

In this mode the selected temperature is reduced of 3°C, independently by the other device
settings. This function allows reducing the energy consumption.
To activate/deactivate the “ECO” mode, press the corresponding key.[ECO]
In "ECO" mode, the “Mode” LED turns amber.

ASC FUNCTION

To enable the "ASC" function press the key until the "Crono" icon is shown on the[mode]
display.

-press simultaneously the keys and for at least three seconds.[ECO] [+]

-To disable this function, repeat the procedure.

OPEN WINDOW DETECTION FUNCTION

Press together the and keys for more than 3 seconds to activate the ”Open Window[ECO] [-]
Detection” function. To deactivate the function repeat the procedure.
The “Open Window Detection” function enables detecting of an open window by sensing a
sudden decrease of the temperature in the room. In such a case, the device deactivates the
heating element for a maximum of 30 minutes or until an increase of the room temperature
reveals that the window has been closed. At the end the device returns to the previous
operating mode.

Page 13

Selmo Electronic

Selmo Electronic

Via Pacinotti, 24 - 35030 Rubano www.selmo.it(PD) Italy- Tel [phone], Fax [phone] -

Via Pacinotti, 24 - 35030 Rubano www.selmo.it(PD) Italy- Tel [phone], Fax [phone] -

Release 02 - June 2018

ENG

Summary table of the "On/Stand-by" LED statuses

Green The device is in stand-by mode
Red

The device is active

Amber

The device is in “Chrono” mode

Summary table of the "Mode" LED statuses

-"Comfort": Red

- "Night": Green

- "Antifreeze": Blinking green

-"ECO": Amber

- "Boost 2h": Blinking red

- "Fil-Pilote": The colour depends by the operating mode configured by the
remote Fil-Pilote control unit (according to the previous list).

NOTES:

1) In case of interruption of the power supply, the thermostat returns to the previous
operating mode with the exception of “Boost 2h” and “Chrono” modes. The state of the
thermostat is saved few seconds after a function is activated.

2) The device will beep to confirm the reception of a signal from the remote control.

3) The device could fail in detecting an opened window e.g. if the thermostat is located on
an isolated area of the room and far from air currents or if the thermostat is placed close
to an external heating source, or if the temperature variation in the room is too slow.

4) “Mode” LED blinking amber: Indicates that the probe is defect; the device is deactivated.

Selmo

“SMART Plus Program ”

Electronic control for towel heaters

Comfort technology division

Accessory: To allow a mixed usage of the SMART

device, connect the T-piece to the towel
radiator, insert the SMART device into the
vertical manifold of the T-piece and connect

Available colours: White; Chromed

Repairs carried out by unauthorized personnel invalidate warranty
The manufacturer reserves the right to make any changes to the product described in this manual,
at any time, and without prior warning.

Selmo Electronic

Selmo Electronic

Via Pacinotti, 24 - 35030 Rubano www.selmo.it(PD) Italy- Tel [phone], Fax [phone] -

Via Pacinotti, 24 - 35030 Rubano www.selmo.it(PD) Italy- Tel [phone], Fax [phone] -

DISPOSAL
This product may not be treated as ordinary household waste. It has to be disposed in
proper waste collection sites. In case of replacement it shall be returned to the
distributor.
Such an end-of-life treatment of the product will preserve the environment and will
reduce consumption of natural resources.
This symbol applied to the present product indicates the obligation to bring it to a proper
waste collection site, in order to let it be disposed according to 2002/96 / CE (RAEE ­WEEE) directives.

the return line of the heating circuit to the

orthogonal connector of the T-piece.

Page 14

Release 02 - June 2018

ENG