Sekonda 1167.64, 1233.27, 1472.27, 1473.27, 1474.27 Instruction manual

Instruction Guide

and 2 Year Guarantee

Thank you for purchasing your SEKONDA time piece.
Your watch operates using a quality Japanese Quartz
precision movement and will give you years of trouble
free use.

If after reading these instructions you require further
information on the operation of your watch please visit
our website below:

www.sekonda.co.uk

The following pages outline the terms and conditions
(including Service and Repairs) that apply to our 2 Year
Guarantee that comes with your SEKONDA watch.

For free bracelet adjusting service, return the watch to
the address below.

T.P. (UK) Ltd, Alexander House, Chartwell Drive,
Wigston, Leicester LE18 2EZ
United Kingdom.

CONTENTS

1 Service and Repairs
2 Water Resistance
3 Operation and Adjustment
4 Basic Non-chronograph
5 Multi-Function
6 Moon phase
7 Chronograph
8 World Timer

1. SERVICE AND REPAIRS

Your SEKONDA watch is guaranteed against defects in
materials and workmanship for a period of 2 years from
the date of purchase. During this period, we will
exchange or repair, at our discretion, any defective
components free of charge.

IMPORTANT - Not covered by Guarantee

1. Batteries, straps and bracelets.

2. Damage caused by accident, misuse or lack of care.

3. Water penetrations except in watches marked as
“Water Resistant”.

SERVICING AND REPAIRS UNDER GUARANTEE

Please post your watch, together with the Retailer’s Sales
Receipt or proof of purchase, the completed Guarantee
slip, and a brief note to explain the nature of the fault, by
Registered Post or Recorded Delivery to the address
shown. Do not send the presentation box as this will NOT
be returned.

SERVICING AND REPAIRS OUTSIDE OF GUARANTEE

Available at a reasonable charge after an estimate has
been sent by T.P. (UK) Ltd. Send your watch to us by
Registered Post or Recorded Delivery to the address
shown.

Important Note

It is important to identify your watch correctly. If, after
reading this Instruction Guide, you have any further
questions regarding the use, operation or adjustment of
your watch, please call us during office hours on 0116
288 2500.

2. WATER RESISTANCE

If your watch is water resistant, it will clearly state “Water
Resistant” or have a static water pressure indication (eg
“30/50/100/200 metres”) on the dial and/or case back.
If it is not marked as water resistant, it should not be
allowed to come into contact with water or be worn in
conditions that could expose it to moisture (eg washing,
heavy rain etc). Certain chemicals in water may damage
the watch seals. To maintain water resistance, we
recommend that your watch is serviced and re-sealed at
least every 12 months by T.P. (UK) Ltd.

IMPORTANT

Buttons must not be operated while in contact with water.

WATER RESISTANT or RESISTANT TO 30 METRES

Suitable for normal everyday use and will resist exposure
to splashes and rain; it is NOT designed to be used whilst
bathing or swimming.

WATER RESISTANT TO 50 METRES

As 30 metres plus bathing or swimming.

WATER RESISTANT TO 100 METRES

As 50 metres plus pool side diving and snorkelling, but
not high board or scuba diving.

WATER RESISTANT TO 200 METRES

As 100 metres plus scuba diving, but not high board
diving.

3. OPERATING AND ADJUSTING YOUR WATCH

Your watch is powered by a battery which was inserted at
the time of manufacture and will require periodic
replacement. New batteries can be supplied and fitted by
your nearest SEKONDA stockist.

The instructions and diagrams on the following pages are
designed to demonstrate the adjustment of your watch.

IMPORTANT

For maximum protection, please keep your watch in its
original box when not in use.

It is important to identify your watch correctly. If, after
reading this Instruction Guide, you have any further
questions regarding the use, operation or adjustment of
your watch, please call us during office hours on 0116
288 2500.

4. BASIC NON-CHRONOGRAPH

QUARTZ NON-DATE WATCH TIME SETTING:

Pull button out to position ‘B’.

Advance hands to correct time.
Return button to position ‘A’.

QUARTZ DATE WATCH TIME/DATE SETTING:

Pull button out to position ‘C’.
Advance hands to correct time.
Pull button out to position ‘B’ to change date.
Return button to position ‘A’.

NOTE: Do not use this function between 8.30PM and

1.30AM as date change cycle is in progress.

Date

4. BASIC NON-CHRONOGRAPH

QUARTZ DAY/DATE WATCH TIME SETTING:

Pull button out to position ‘C’.
Advance hands to correct time.
Return button to position ‘A’.

DAY/DATE SETTING

Pull button out to position ‘B’.
Turn clockwise or anti-clockwise to set correct date.
Turn clockwise or anti-clockwise to set correct day.

NOTE:

To set the day on some models turn hands

forward until correct day and time are reached.

NOTE:

Do not set the day/date between 8.30PM and

5.00AM as day/date change cycle is in progress.

Day/Date