DR30 MAX
Warewash Chemical
Dispenser
Dispensing technology by Seko UK
400-2003-00
A total commitment to guaranteed reliability and optimal
performance has led to Seko being utilised in many types
of industry. Including food and beverage, agriculture,dairy
and water treatment.
We operate to the highest quality standards of (ISO 9001)
In manufacturing, R&D and product testing.
We have experienced staff and a network of specially
appointed distributors around the world to provide local
support.
Dispensing Technology for your Industry
Please visit our web site or contact us for details on our
Laundry Dispensing Products, Drain Enzyme Pumps,
Blending Stations, Sprayers and Foamers.
www.sekouk.com
SAFETY INFORMATION
Any maintenance or servicing of Seko equipment should
only be carried out by a competent professional and any
electrical work by a qualified electrical engineer.
Always isolate Seko equipment from any electrical
supply or external machine which supplies electrical
signals. This must be done prior to carrying out any
mechanical or electrical installation, repair or
maintenance. FAILURE TO DO SO MAY RESULT IN
SPILLAGE OF CHEMICAL, DAMAGE TO
EQUIPMENT OR PERSONAL INJURY
All Seko equipment should be wired to a mains supply via
a two pole isolating switch, in accordance with the
relevant electrical standards.
Seko equipment fitted with an on/off switch may be wired
to a 13Amp mains plug fused at 3 Amps, for connection to
a 13 Amp socket
Always observe appropriate precautions against chemical
contact. Refer to the chemical providers COSHH data
sheets prior to changing chemical containers or peristaltic
tubes
PART 1
PART 2
CONTENTS
INSTALLATION GUIDELINES
CONTENTS
Mechanical Installation
Electrical Connections
Probe Installation
Routine Maintenance
PART 3
Set up Procedure
TECHNICALSPECIFICATION
Voltage
Signal Inputs
Tubing
Flow Rate
Rollers
Enclosure
Motors
Approvals
Weight
210-230vac 50-60Hz
24v AC/DC to 230v AC/DC Opto Isolated
STD EPDM ( SILICONE on Request )
Detergent 200ml/Min Rinse 70ml/Min
Acetal
IP65 260mm x 180mm x 90mm
12v dc
EMC89/336/EEC EN50081-1 LVD 72/23EEC
2.3Kg
Loading...